Hearth repair in Mayport, from the base up
We sound every tile on your Mayport hearth, measure the extension and write the fix down before any work. Free inspection.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Hearth experts who measure before they tile
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
A factory-built unit's hearth pad is checked against its own manual.
- Free inspection and estimateYour hearth in Mayport is sounded, leveled and measured on a free visit before any price is written.
- 100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
- Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.
A hearth that has dropped with the floor
If the extension sits lower than the firebox floor, or tilts toward the room, it has moved. A slab poured over forms that later rotted can drop in the middle, and on a framed floor, the framing near the fireplace can sag. The repair starts under the hearth, not on top of it.
We check level across your hearth in Mayport, look under it from a crawlspace where there is one, and write down what is carrying the slab. The free inspection tells you whether the fix is new support, a new slab or both.
Mayport is a neighborhood within the City of Jacksonville. The county for Mayport is Duval County.
Hearth repair work we take on in Mayport
- Crumbling grout raked out and renewed
- Wood flooring cut back from the ember zone
- Inner hearth firebrick replaced in refractory mortar
- Factory-built hearth pads checked against the listing
Sound, measure, rebed, cure
-
Describe the hearth on the call
Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.
-
Sounding and measuring
Each tile is tapped, the slab's level is read and the extension is measured against the opening.
-
Support first, surface second
A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.
-
Cured before heat, then handed back
The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.
10% off any service booked within 72 hours of inspection
A hearth in Mayport measured short of code can be extended, and that job is discounted too.
What holds the extension up
An extension has to rest on noncombustible support. Depending on how the house was built, that can be the fireplace foundation carried forward, a slab on the ground, or a masonry or concrete support reaching out over a framed floor. Each fails in its own way: a slab on grade can settle, and support over framing depends on the framing staying put.
Before we price a rebuild, we find out which support your hearth has, from below where a crawlspace allows or by opening the edge. The support type decides whether the new extension can sit on what is there or needs a base of its own.
Setting a one-piece stone slab
A single stone slab spans its whole extension, so any void in its bed becomes a span. Granite, slate and marble all break when a heavy point load lands over a gap. Setting a slab means a full, even bed, with the slab lowered and pressed down so the mortar reaches its edges and corners.
Before a slab goes back, we check that the base is flat and sound, since a slab bedded onto a hump rocks on it. Heavy slabs take two or more people and a plan for lifting them without cracking them. That handling goes on the estimate too, because it is real work.
Bonding a clean break in stone
A stone hearth broken in two clean pieces can sometimes be glued back together rather than replaced. Stone repair epoxies are made for this, tinted to the stone and used as their maker directs. The joint is fitted dry first, then glued, clamped and cleaned off before it cures.
Gluing works only if the pieces are sound and the bed below is fixed, or the same break reopens beside the repair. Shattered pieces, chips missing from the joint, or a slab that cracked from heat are replacement cases. We show you the break and give you both options when both are real, with each one priced.
Tile, slab, support and size, in writing
- Slab level checked across the front and at both corners
- Cracked tile or stone replaced, with the matching source named
- Stone slab glued or replaced, both options priced when both work
- Seam at the firebox cleaned and refilled with a heat-suited material
Hearth repair questions from Mayport
Do you replace only the cracked tiles or the whole hearth?
Only the cracked ones when the slab under them is sound and the tile can be matched. If the slab has moved or the extension is too small, we explain why a bigger repair makes sense and price both.
Do you work on hearths for factory-built fireplaces?
Yes. We follow the unit's listing and manual for the pad size and material, and use listed products where the maker calls for them. Have the model number ready when you call if you can find it.
More services in Mayport
-
-
-
-
-
-
Learn more about fireplace hearth repairAll services in Mayport
Hearth repair from local specialists in Mayport
Describe the cracks or the hollow spots on a call to (904) 920-5495, and the free inspection in Mayport goes on the calendar.
Free Inspection