Stone chimney repair in Mayport by local masons
Hard cement patches or caulked joints on your Mayport chimney come out before any new mortar goes in.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Stone chimney specialists for Mayport homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Water behind the stone is traced before the stone is put back.
- Free inspection and estimateWhether your Mayport chimney is full stone or veneer is settled on a free visit, before any price.
- Upfront pricing, no hidden feesStones, joints and veneer area are priced in writing one line at a time.
- Family owned and operatedOur family-owned masons approve the mortar sample with you before the first joint is filled.
A sealer that made the stone look wet
Some sealers form a film on the stone that darkens it and traps moisture behind it. Water that gets in through a joint cannot dry out through the face, and the stone can start to flake under the film. Some sealers also darken the stone permanently, which changes how any repair will match.
If a film sealer has been applied to your chimney in Mayport, we write down what we see and what removing it would involve. Any water repellent we recommend afterward is a breathable type suited to stone, applied only after repairs.
Mayport is one of the named neighborhoods of Jacksonville. Mayport is part of Duval County.
Stone chimney repairs we handle in Mayport
- Loose stones reset on fresh mortar beds
- Bulging anchored veneer secured or rebuilt
- Old cement patches and caulk removed
- Base drainage exits opened and restored
The order of a stone chimney repair
-
Describe what moved
Tell us what has shifted or fallen, and the free visit comes equipped for it.
-
Build and backing confirmed
Corners, joints and the base show the build, and a loose piece shows what is behind the veneer.
-
Reset, repoint or reinstall
Stones go back on fresh beds, joints fill in layers, and veneer returns to a repaired backing.
-
Matched and cured
An approved mortar sample and the old joint profile guide the finish, and the cure time is written down.
10% off any service booked within 72 hours of inspection
Loose stones or open joints? The stone work you book in the next three days comes 10% off.
Filling deep joints in layers
A deep stone joint cannot be filled in one pass without the mortar slumping and pulling away from the stone. The repointing guidance calls for filling deep joints in layers, each pressed in and left to firm before the next goes on.
The final layer is tooled when it is firm enough to take a thumbprint without smearing. That timing matters for how the joint sheds water and how it looks. On a big run of joints, the layering adds time, and the estimate shows it rather than hiding it. Skipping the layering is how a deep joint ends up with a hard skin over a soft, hollow core.
Replacing a broken stone
A stone cracked through its body is cut out along its joints and replaced. The replacement has to match in type, color and size, and for natural stone that may mean a piece from a supplier of the same stone, or a salvaged piece from a hidden face of the chimney.
Replacement stones are trimmed to fit the opening, with any cut face turned in or dressed to match the natural face. Each replaced stone is counted on the ticket, with where its match came from. Where no match can be found, the options and how each would look are shown before any stone is cut out.
Working on stone from the roof
Stone work on a chimney happens on the roof and on ladders, with stones and mortar carried up. We protect the roofing around the chimney, keep loose material from sliding off the roof, and stage the work so nothing heavy sits on the shingles.
Where the chimney is tall or the roof is steep, the estimate includes the access equipment needed to work safely. It is part of doing stone work properly, and it is listed so you can see it. Loose stone and debris are lowered, not thrown, so nothing damages the roof, the gutters or the ground below.
What we check on a stone chimney in Mayport
- Mortar mix and sand matched, with a cured sample to approve
- Veneer backing opened and checked where bulging or loose
- Veneer gap above the roof corrected to the maker's guide
- Access equipment and roof protection listed on the estimate
Before a stone is taken out
Will the new mortar look different?
It starts darker and dries lighter, which is why we cure test samples and compare them before work begins. The joint style is matched as well as the color.
Do you repair manufactured stone veneer as well as natural stone?
Yes. Manufactured veneer follows its maker's installation guide for the backing and setting mortar, and we match the product line and color as closely as it allows.
More services in Mayport
-
-
-
-
-
-
Learn more about stone chimney repairAll services in Mayport
A free stone chimney check in Mayport
Full stone or veneer, our stone specialists in Mayport explain the repair the build calls for and write down the price.
Free Inspection