Local chimney liner installation in Mayport
We size the liner to what burns in your Mayport fireplace or stove at a free inspection, then follow its listing to the cap.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Chimney liner specialists who prove the flue first
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Old creosote is swept out before relining, so no fuel is left sitting behind the new liner.
- Free inspection and estimateWe sweep and measure the flue in Mayport at no charge before any liner is ordered.
- Upfront pricing, no hidden feesLiner size, alloy, insulation and cap are one written price, set before the order goes in.
- Workmanship warrantyHow we install the liner is covered by our workmanship warranty, and the maker's terms come in writing.
Relining a flue for a gas appliance
Venting a gas appliance through a masonry chimney calls for a flue lined and sized for gas. Sizing is taken from NFPA 54's venting tables and the manual for the appliance instead of the fireplace rules, because gas exhaust behaves differently from wood smoke.
Gas exhaust carries a lot of water vapor, and an oversized, cool flue lets it condense on the walls, which is why size matters as much here as with wood. The liner's alloy, or an aluminum liner where the listing allows it, is chosen from the appliance's category, and both are named for the Mayport job. What burns below the flue decides the liner, so have that ready when you ring (904) 920-5495.
Kathryn Abbey Hanna Park lies within Mayport. Mayport is about 13 miles from Jacksonville in a straight line.
What's Included
What relining covers in Mayport
- Old flue swept clean before anything goes in
- Stainless alloy picked for the fuel you burn
- Broken tile cleared out of the liner's way
- Screened liner cap fastened at the top plate
How It Works
How our liner specialists reline a chimney in Mayport
-
Flue swept and proved
The old flue is cleaned and checked, and a test length or cone is lowered to confirm the liner will pass.
-
Liner sized to the appliance
The diameter comes from the stove collar, the insert or the fireplace opening, with insulation where the listing calls for it.
-
Liner lowered and connected
The liner goes down full height and joins a tee with a clean-out, or an adapter on the insert.
-
Top plate, clamp and cap
The top plate is fastened to the crown, the liner is clamped and trimmed, and a screened cap goes on.
10% off your first service when you book today
Chimney relining in Mayport, booked today, comes with 10% off your first service.
Where an aluminum liner fits, and where it does not
Aluminum liners have a narrow listing. The makers write them for Category I gas appliances, those fitted with a draft hood or listed for Type B gas vent, and the instructions rule out solid fuel, liquid fuel and gas appliances in Categories II through IV.
So aluminum is out for any flue that serves, or might later serve, a fireplace or stove burning wood. It can be the right choice for a gas appliance that matches its listing. Where the chimney's future use is uncertain, stainless keeps more options open, and we explain the trade.
Wrapping a liner in insulating blanket
Blanket insulation for a liner is a foil-faced ceramic fiber sheet. It is laid out flat, the liner and its bottom fitting set on top, and the blanket wrapped around with overlapping seams taped with foil tape along their length. A wire mesh sleeve then goes over the wrapped liner to hold the blanket in place as it is lowered.
The wrap starts at the bottom fitting and stops a few inches below the crown, where the instructions leave room for the liner to grow with heat. The blanket adds thickness, so the flue has to be proved with the wrap included.
Poured insulation around a liner
Instead of a blanket, some liner systems are insulated with a loose, lightweight mix poured into the space between the liner and the old flue walls. It fills irregular spaces that a blanket cannot, including gaps around offsets and oversized tile.
The mix needs the bottom of the space sealed first so it stays where it is poured, and it adds a break-in period to the first fires, set by the maker. It suits a flue with room to spare around the liner. Which method is planned, and why it fits your flue, is explained before the job. The mix goes in from the top in stages so it settles evenly.
Free Inspection
Measured before a liner is ordered in Mayport
- Liner diameter set from the appliance collar or the fireplace opening
- Top plate sealed or screwed to the crown to carry the liner's weight
- Screened liner cap and storm collar fitted at the top of the flue
- Crown repair under the top plate, priced as a separate item
FAQ
Before a liner is ordered
Do you install chimney liners in Mayport?
We do. Describe the fireplace or stove and the reason relining came up, and the Mayport estimate visit is planned around it.
Can relining be done in one day?
A plain liner in a straight, clean flue can go in within a day. Tile removal, insulation, crown repair or a new wall opening add time, and the estimate gives the schedule.
Our Services
More services in Mayport
-
-
-
-
-
-
Learn more about chimney liner installation and reliningAll services in Mayport
A liner sized to your Mayport appliance
A family-owned team of relining professionals sweeps and measures your Mayport flue for free.
Free Inspection