Gas log installation for Mayport homes
A gas log set for your Mayport fireplace, sized to the firebox and set to the manual after a free inspection of the flue and damper.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Gas log pros who measure first in Mayport
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
We read the rating plate before connecting anything.
- Free inspection and estimateYour Mayport firebox, flue, damper and room are measured against the set's manual at no charge before anything is bought.
- Upfront pricing, no hidden feesSet, burner, clamp, cleaning and any repairs are priced in writing, with the gas trade's part named.
- 100% satisfaction guaranteedIf the flame is sooty or the set will not stay lit after our installation to the manual, we come back.
Yearly service on gas logs
Log sets are not set-and-forget. Pilots gather dust, burner ports collect bits of ember material, and logs shift when they are moved for cleaning, and propane sets can need attention more often. Propane sets in particular can need their ports cleaned more often.
A yearly visit catches all of that before it turns into soot or shutdowns, and the schedule can start on install day. Want your Mayport gas logs looked after every year? Ask about service at (904) 920-5495.
Mayport is in Duval County. Kathryn Abbey Hanna Park lies within Mayport.
Gas log work for Mayport fireplaces
- Vented log sets with permanent damper clamps
- Logs, embers and media placed to the manual
- Inherited sets identified and reset
- Lighting the new set together in your Mayport living room
How our gas log pros install a set in Mayport
-
Measure firebox and room
Firebox, chimney height and, for vent-free sets, the room are checked against the manual.
-
Clean and clamp
Soot and debris come out of the fireplace, and vented sets get their permanent damper clamp.
-
Connect and test
Once gas reaches the valve, the set is connected, leak tested and its pressure read.
-
Place logs and light
Logs and embers go where the manual shows, and we light the set with you.
10% off any service booked within 72 hours of inspection
Ready for gas logs? Book within 72 hours of the measuring visit and 10% comes off.
What a vent-free log set is
A vent-free log set is an unvented room heater, and the code's section 621.1 wants it listed to ANSI Z21.11.2 and set up exactly as its listing and instructions say. One maker's vent-free set, tested to that standard, may run with the flue damper closed.
That is the attraction and the limit at once: the room receives everything the flame produces. The code's rules on size, input and location follow from that, and we apply them before a vent-free set is chosen. A vent-free set is also a heater, not only a decoration, which is why its rules read like a heater's. We walk through them with you before recommending one.
Cleaning the fireplace for gas logs
Makers want a clean fireplace under their burners. One vented set's manual calls for the chimney flue, damper and firebox to be thoroughly cleaned of soot, ashes and loose paint and inspected before installation, and warns that some older fireplaces need repair first.
A vent-free maker asks for the same cleaning of the flue and firebox. Cleaning also shows the condition of the damper that will hold the clamp and the firebox floor that will carry the burner, and we write down anything that needs fixing first. Loose paint in particular can flake onto a burner once it heats.
Service before the season
One log set maker asks for the appliance to be examined before use and inspected at least annually, to prevent burner shutdown, soot and odors, with the controls, burner, air shutters and air passages kept clean. It suggests more frequent cleaning for propane sets.
The same manual asks for periodic examination and cleaning of the fireplace's venting system. A yearly visit covers the burner and pilot, the logs and media, the damper clamp, the pressure and the flame, and we can schedule it on the day the set goes in. Flames with unusual shapes or slow ignition between visits are a reason to call sooner.
Measured in Mayport before a log set is ordered
- Front lip or recess measured, with depth taken inside it
- Chimney height from the hearth to the top for a vented set
- Logs, embers and sand or vermiculite set exactly to the manual
- Outside air ducts and ash doors closed off under vent-free sets
Before a log set goes in
Who runs the gas line?
The gas trade: a gas fitter, the utility or your propane company. The estimate names them, and our hookup and test follow once gas is at the valve.
Why are my gas logs getting sooty?
Flame touching a log it should not reach, a burner or ember bed out of order, or a shortage of air. Logs go back to the manual's layout and the burner and air get checked.
More services in Mayport
-
-
-
-
-
-
Learn more about gas log installationAll services in Mayport
Put gas logs in your Mayport fireplace
A local gas log specialist inspects the damper and chimney in Mayport and quotes in writing.
Free Inspection