Chimney masonry repair in Mayport by local masons
Masonry work in Mayport starts with a free inspection of where the water gets in, so the repair stays repaired.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Brick and mortar specialists for Mayport chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Masonry on your Mayport chimney is repaired with mortar no harder than the wall, so the brick stays the part that lasts.
- Locally owned and operatedA locally owned business answers for the brick and mortar work on your Mayport chimney.
- Upfront pricing, no hidden feesEach area of the stack is priced on its own line, so you can see what each repair costs.
- 100% satisfaction guaranteedIf the repair does not look or hold the way we agreed, we come back and make it right.
The masonry you can see from the attic
Where a chimney passes up through the attic, its sides are visible from inside the house. Water stains on the brick, damp mortar, or white deposits there tell us water is getting into the stack above the roof. We look from the attic as well as the roof in Mayport homes when access allows.
We also check that the air space between the chimney and the framing is still open and free of debris, since the code requires that gap. Masonry repairs are planned from the outside, but the attic view can show how far water has traveled. Loose brick or crumbling joints in Mayport? Ask for mortar samples when you call (904) 920-5495.
Kathryn Abbey Hanna Park lies within Mayport. Measured in a straight line, Mayport is about 13 miles from Jacksonville.
What's Included
Brick and mortar repairs for Mayport homes
- Every damaged area mapped on the stack by type
- Repointing mortar pre-hydrated and packed in layers
- Racked shoulders washed or capped to shed rain
- Fresh joints covered from rain at your Mayport home
How It Works
How our masonry specialists repair a chimney in Mayport
-
Water path traced first
We check the crown, the cap, the shoulders, the weather side and the flashing before pricing joints or brick.
-
Joints raked, bad brick cut out
Worn mortar is raked back to sound depth, and cracked or spalled units come out without thinning the wall.
-
Matched mortar packed and tooled
Pre-hydrated mortar of the type on your estimate goes in, with salvaged or new brick matched for size and color.
-
Brick cleaned the gentle way
Smears come off with a brush and water while they are fresh, and no harsh acid touches the brick.
10% off your first service when you book today
First masonry job with us? It is 10% off.
Repair mortar no harder than the wall
When new mortar goes into an old wall, it has to work with the brick and mortar already there. BIA's guidance for repointing sets the rule: the compressive strength of the repair mortar should be equal to or less than that of the existing mortar.
A harder repair mix does not share movement with the soft mortar around it. Instead it pushes stress onto the edges of the brick, and BIA names the outcome as spalling. That is why a bag of the strongest mix is not the default choice, and why we look at the existing joints before choosing what goes into them.
Water on the racked shoulders
As a chimney narrows, the brick is racked in steps, and each step is a small ledge exposed to rain. BIA's chimney note prefers solid brick laid on a setting bed over those steps. Where a mortar wash is used instead, it asks for the wash to fill each step individually rather than bridge over the whole rack in one sloped layer. A bridged wash cracks away from the brick and hides a void where water collects.
When we repair a shoulder, the finish goes back in the form BIA describes, sloped so water leaves each step. The top of each step is also checked for loose units before it is covered.
Protecting fresh joints while they cure
New mortar needs time to cure, and heavy rain on a fresh joint can wash out its surface and weaken its bond. BIA's cleaning and construction guidance recommends covering the tops of walls and openings with a waterproof membrane at the end of each work day and during stoppages.
On a chimney that means covering the top and any open work before we leave, and checking the forecast when scheduling. Fast drying in strong sun or wind can also weaken new joints, so exposed repairs may be shaded or lightly misted. Those steps affect how the work is scheduled, so they are planned from the start.
Free Inspection
Mapped on the brick in Mayport
- Sand and color match, confirmed with a cured test batch
- Number and location of brick units to cut out and replace
- Source of replacement brick: salvaged from the stack or new
- Water entry points found, and the repairs that close them
FAQ
Before the joints are repointed
Will the repair match the rest of the chimney?
Mortar color is checked with a sample that has cured against the brick, replacement units are chosen for size and texture, and the joints are tooled to the old profile. The estimate tells you where the brick comes from.
Can masonry work be done in the rain?
Not well. Fresh mortar needs protection from heavy rain while it cures, so we schedule around the forecast and cover open work at the end of each day.
Our Services
More services in Mayport
-
-
-
-
-
-
Learn more about chimney masonry repairAll services in Mayport
Sound joints for your Mayport chimney
A local brick specialist checks your Mayport chimney, finds the water path and writes the repair down.
Free Inspection