Fireplace restoration for Mandarin homes

Family-owned fireplace specialists check your Mandarin fireplace free and write down every part from the hearth to the flue.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local restoration pros who keep the original look

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

The room is protected and the rinse water caught, so only the fireplace changes.

Family owned and operatedA family business plans your Mandarin fireplace as one job, so each step happens once and in the right order.
100% satisfaction guaranteedYou approve the trial patch and the mortar sample before the face is touched, and our guarantee covers the result.

Call (904) 920-5495 Free Inspection

Keeping the look you already have

Some owners want the fireplace working again and looking the way it was built, not updated. Restoration does that: the masonry stays as it is, the opening stays the same size, the hearth keeps its stone or brick, and new joints follow the pattern and color of the old ones around them.

Changing the facing, the surround or the mantel is remodeling, and the estimate keeps restoration inside what the fireplace already is. Want your Mandarin fireplace brought back rather than replaced? Call a restoration specialist at (904) 920-5495.

Mandarin lies within Duval County. Mandarin is inland.

Restoration work for Mandarin fireplaces

Unused fireplaces brought back to working order
Open firebox joints and cracked firebrick redone on the heat side
Seized dampers freed or replaced
Mismatched old patches cut out and redone

Call (904) 920-5495 Free Inspection

Clean, repair, repoint, finish

Clean and assess
Everything from the hearth to the flue top is cleaned, then checked and written up part by part.
Heat side first
Firebox, parging and damper repairs are made in refractory materials and left to dry.
Trial, then the face
A trial patch is cleaned and a mortar sample made for your approval before the face work.
Repoint, cure, clean
Face joints are repointed in layers, left to harden, then the face gets its final cleaning.

Worn brick on inland fireplaces

Brick worn round at the edges is part of an old fireplace's age. In Mandarin we keep it and set new joints slightly back so they do not look wide.

Only bricks that have lost their face are replaced.

10% off any service booked within 72 hours of inspection

Restoration earns the discount whether this is your first job with us or not.

Call (904) 920-5495 Free Inspection

Why the order of work matters

An old fireplace restored in the wrong order costs more and looks worse. Cleaning the face before the joints are repaired can wash grit into open joints, and repointing the face before the heat side is fixed means working twice around the opening.

Our order is set: clean the flue, smoke chamber and firebox; repair the heat side; free or replace the damper; then test-clean and repoint the face, and clean it again only once the new mortar has hardened. Each step is on the estimate in that sequence, with its drying time, so the order is visible before anything starts.

Telling efflorescence from other white stains

Efflorescence is a white, powdery deposit left when water carries salts out of the masonry and evaporates. The Brick Industry Association describes it as normally harmless, and notes that other white marks, such as lime run and white scum, are sometimes mistaken for it.

Each needs a different treatment, so we identify the deposit before cleaning. Efflorescence also tells us water is moving through the brick, and restoration includes finding where it comes from, whether a leak above or water down the flue. Cleaning it off without stopping the water only brings it back within a season.

Checking the steel lintel above the firebox

The masonry over a fireplace opening rests on a noncombustible lintel, which the code wants bearing at least 4 inches on each end. On older fireplaces it is often a steel angle, and the Brick Industry Association recommends space at its ends for it to expand with heat.

A lintel that has rusted or sagged shows as a crack running up from the corner of the opening or brick dropping at the center. Restoration checks for both. A failed lintel is a structural repair written up on its own, done before the face work above it, since repointing over a moving lintel would crack again.

Safety work and face work on one page

Flue, smoke chamber and firebox cleaned before the condition list
Condition of each part, hearth to flue top, written up after cleaning
Trial cleaning patch on the face, judged dry
Hearth extension size and condition noted separately

Fireplace restoration questions from Mandarin

Do we have to restore everything at once?

No. The estimate splits safety work from appearance work, so the fireplace can be made safe first and the face finished later. The order of work still applies.

Can you restore a stone fireplace too?

Yes. Stone joints and cleaning take their own methods, and we identify the stone before choosing any cleaner or mortar.