Local chimney rebuild for Mandarin homes
A free inspection tells you if the problem starts at the footing before we price rebuilding the top of your Mandarin chimney.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Chimney rebuild specialists who test every course
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Counterflashing goes into the new joints as the stack rises, which is the right time to set it.
- Family owned and operatedOur family business takes your Mandarin chimney down by hand and lays it back up itself.
- Upfront pricing, no hidden feesThe take-down line, flue plan and crown are priced before the first brick comes off.
- Workmanship warrantyFrom the new courses to the counterflashing, the rebuilt stack carries our workmanship warranty.
A rebuild during a home sale
When a buyer's inspection flags a leaning or crumbling chimney, a rebuild estimate turns the finding into a defined scope: how much comes down, what goes back, and the schedule. That gives both sides something concrete to negotiate on.
If the rebuild happens before closing, cure time and any permit inspections have to fit the calendar, so share the closing date at the first call. The written record of the work then goes to the new owner of the Mandarin house. The estimate can go to the buyer's agent exactly as written. Chimney leaning in Mandarin? Our masons mark where sound brick starts, and it takes one call to (904) 920-5495.
Mandarin is one of the named neighborhoods of Jacksonville. Mandarin is part of Duval County.
What's Included
Rebuild work around Mandarin
- Each course tested by hand to set the take-down line
- Flue covered before the first brick comes off
- Courses laid plumb and tooled so water runs off
- Finished height checked against the code's height rule
How It Works
How a rebuild in Mandarin runs
-
Take-down line marked
We test each row of brick from the top down and mark where sound brick starts.
-
Old brick taken down by hand
The flue is covered and the roof protected, then brick comes off a row at a time, with sound brick saved to relay.
-
Relaid plumb around the flue
Brick goes back in matched mortar with tooled joints, around new clay tile or ready for a listed liner, and is flashed into the roof.
-
Crown cast, cap on last
A new crown with an overhang and a drip edge cures before the cap goes on and the first fire is lit.
Local Conditions
Matching the old brick in Mandarin
The closest match for a rebuilt chimney is its own brick. Sound units from the take-down are cleaned and relaid, and new brick is chosen for size first so the courses line up.
New mortar looks darker at first and settles as it cures, and the estimate tells you where each brick will come from.
10% off your first service when you book today
Loose or leaning chimney? Call today and your first service is 10% off.
The divider between two flues
Where two or more flues run in one chimney, the code wants masonry built between them, a wythe not less than 4 inches thick (FBC R1003.13). That divider keeps smoke and heat in one flue from crossing into the next through an open joint.
In old chimneys the divider can be broken, thin or missing near the top. A rebuild puts it back to full thickness through the rebuilt section and ties it into the outer walls. Each flue's tile or liner is then set on its own side of the divider. Where one flue is abandoned, the divider still goes back, since the empty flue beside it still collects heat and water.
Keeping the rebuilt masonry off the framing
A rebuild that reaches into the attic has to keep its distance from wood. The code wants a 2-inch airspace between combustibles and any part of a masonry chimney that runs through the interior or is built into an outside wall, and 1 inch for a chimney standing wholly outside, including where it passes a soffit or cornice (FBC R1003.18).
Framing that was built tight to the old stack is noted, and the rebuilt masonry is laid to hold that gap. Where a roof deck edge touches the brick, it is trimmed back as part of the tie-in.
Protecting fresh mortar and concrete
New mortar and a cast crown gain strength slowly, and two things harm them early: rain that washes the surface before it sets, and drying so fast that the mix cannot cure. Both show later as crumbly joints or a crazed crown.
Fresh work is covered at the end of each day and whenever rain threatens, and the crown is kept damp as its data sheet directs. The schedule leaves room for those cure periods, which is why a rebuild does not finish on the day the last course is laid. Hot, windy days call for shade and damp burlap just as rainy ones call for covers.
Free Inspection
Tested before a rebuild is priced in Mandarin
- Take-down line stated in courses or feet, with the reason for it
- Replacement brick chosen for size, then for color and surface
- Cast crown with an overhang, a drip edge and a sealed bond break
- Cure time allowed before the cap goes on and the first fire
FAQ
Before the first brick comes off
How long does a chimney rebuild take?
It depends on how far down the take-down goes, the flue work and the weather, plus cure time before the cap and first fire. The estimate gives a schedule with the working days marked.
Can I use the fireplace while the rebuild is underway?
No. From the day the take-down starts until the crown has cured and the cap is back, the flue stays covered and the opening sealed. The estimate gives the date it can be used again.
Our Services
More services in Mandarin
-
-
-
-
-
-
Test your Mandarin chimney course by course
A local masonry specialist checks your Mandarin chimney top and prices the rebuild from where sound brick starts.
Free Inspection