Fireplace insert installation for Lake Shore homes
Each wood insert fitted in Lake Shore carries an EPA Step 2 label and goes in to its listing, after a free inspection.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local insert pros who install to the listing
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
A blower's outlet is planned with an electrician, named on the estimate, not improvised.
- Free inspection and estimateYour Lake Shore firebox, chimney height and hearth are measured against the insert's manual at no charge, before anything is ordered.
- Upfront pricing, no hidden feesEvery part of the job is priced before ordering, from repairs to the rain cap, and nothing is added without your yes.
- 100% satisfaction guaranteedIf the insert smokes or draws poorly after installation to its manual, we come back and set it right.
You already picked an insert
If you have a model in mind, bring the name or the manual to the visit. The listing and manual set the smallest fireplace it fits, its clearances to mantel and trim, the hearth it needs in front and the liner it connects to.
We measure your fireplace against those figures and tell you plainly whether the model works in the space, and if not, what would need to change or which size would fit better. Have an insert picked out for a fireplace in Lake Shore? Share the model with us at (904) 920-5495.
Lake Shore lies inland. Lake Shore is one of the named neighborhoods of Jacksonville.
Insert installation for Lake Shore fireplaces
- Listed wood inserts installed to their manuals
- Top plates and rain caps closing the old flue
- Older unlined inserts reconnected to a liner
- Model, liner and clearances recorded for your Lake Shore house
How insert installation runs
-
Measure against the manual
Firebox, chimney height, hearth and clearances are checked against the insert's table before ordering.
-
Repair and clean first
Fireplace repairs are made and cured, and the flue is cleaned before the liner goes up.
-
Liner, plate and cap
A listed stainless liner runs to the top, closed with a top plate and a rain cap.
-
Set, seal and fire
The insert and surround go in as the manual directs, and the first fire is run with you.
Mantels and inserts in Lake Shore homes
Coastal or not, the mantel is where insert plans most often change. Each insert's label sets its own distance to a mantel above.
We measure the mantel in your Lake Shore home against the label before you order.
10% off any service booked within 72 hours of inspection
An insert for a home in Lake Shore is a larger job, and the discount still applies to all of it.
What may not be taken out of the fireplace
Fitting an insert can tempt an installer to cut away brick for a better fit. One maker's guide warns against removing bricks or mortar from the existing fireplace, apart from the smoke shelf and damper frame allowance.
The firebox walls, the lintel and the hearth stay as built. When an insert will not fit without cutting into them, the answer is a smaller insert or a different plan, not a weaker fireplace. We measure with that limit in mind and show you which models fit your fireplace as it stands, so the choice is made before the work.
Reading the draft of a new insert
Draft is the pull that moves air into the insert and smoke up the chimney. One maker describes both ends of the range: too much draft can overheat the heater, shown by an uncontrollable burn or a glowing red part, while too little causes backpuffing and smoke leaking from joints.
After installation we watch the first burn for either sign. A liner sized to the collar and a chimney at the manual's height put the draft in range in the ordinary case, and where they do not, we say what to adjust before the insert is used hard. Any change we make is written on the ticket.
Smoke rolling down the glass
Smoke pouring down across the glass is, in one maker's words, the sign that the air control was turned down too soon or set too low. The wood needs time on a high setting to char before the air is reduced, especially after a fresh load.
We show you how the air control works on install day, with a live fire, so the first weeks are not spent guessing. The same maker suggests opening the loading door slowly after the fire has brightened, which prevents a puff of smoke into the room. Both habits keep the glass clearer as well.
Measured in Lake Shore before an insert is ordered
- The four firebox dimensions set beside the insert maker's size table
- Chimney height, measured the way the insert manual measures it
- Flue cleaned and checked for obstructions before the liner goes up
- Outside air through the ash chamber where the fireplace allows it
Before you order an insert
Can an insert go into a metal fireplace?
Only where both the insert and the factory-built fireplace allow it. That means meeting the insert maker's extra conditions for metal fireplaces, so we read both manuals first.
Can I keep my mantel?
Often, if it clears the distance on the insert's label. When it does not, you pick a model with smaller clearances or rework the trim, and we measure before you order.
More services in Lake Shore
-
-
-
-
-
-
Learn more about wood-burning fireplace insert installationAll services in Lake Shore
A wood insert that fits your Lake Shore fireplace
Have the insert model handy when you ring (904) 920-5495, and our fireplace experts will check it against your Lake Shore firebox.
Free Inspection