Electric fireplace repair for Lake Geneva homes
Electric fireplace repair in Lake Geneva with the unit handled carefully, the wall protected and every function retested.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Family-owned repair experts serving Lake Geneva
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Inserts and wall units are handled with the trim and wall protected.
- Free inspection and estimateYour Lake Geneva unit is tested part by part, from the outlet to the board, at no charge.
- 100% satisfaction guaranteedIf the repaired unit does not heat, light and respond as its manual says, we return and put it right.
- Family owned and operatedThe family crew that traces the fault in your unit is the crew that repairs it.
Heat that feels weaker than before
Weaker heat than it used to give can mean the unit is losing airflow. Dust and pet hair packed in the intake and around the fan cut the air moving over the element, and the room feels less warm. Units near a rug or in a room with pets clog faster, and the cleaning schedule should reflect that.
Cleaning the airways as the manual describes, with the power off, often restores the output. If it does not, the element or fan speed is tested. Electric fireplace feeling weaker in your Lake Geneva home? Phone (904) 920-5495, and our repair team will check it for free.
Lake Geneva falls within Clay County. Lake Geneva is an inland community.
What an electric fireplace repair covers in Lake Geneva
- Supply checked before the unit is opened
- Wall units lifted off and rehung level
- Airways cleaned of dust and pet hair
- Your Lake Geneva unit diagnosed for free before any part is ordered
How electric fireplace repair runs
-
Model number first
Read us the rating label, and parts availability is checked before the visit.
-
Supply, then each part
The outlet and breaker are checked, then heater, fan, flame effect, board and remote are tested in order.
-
Failed part replaced
The maker's part for your serial number is fitted, with any electrician work done separately.
-
Retested with you
Heat, flames, remote and thermostat are run through their settings before we leave.
Breakers tripping in Lake Geneva homes
A tripping breaker is either an overloaded circuit or a fault in the unit, in any house.
We test the unit alone in Lake Geneva to tell which it is.
10% off any service booked within 72 hours of inspection
Heater, flame motor or remote, the repair you approve in the next three days comes 10% off.
Two appliances in one cabinet
An electric fireplace is really two appliances sharing a box. One is a fan-forced heater: a resistance element, a small fan, a thermostat and a thermal cutoff. The other is the flame effect, where lights play across a spinning rod or run a stored sequence behind a screen.
A control board ties them together and listens for the remote. Because the two halves work independently, the symptoms tell us where to look. Heat without flames points to the light side. Flames without heat points to the heater side. Nothing at all points to the supply or the board. The board sits between both halves, so it is tested after the supply and before any part is condemned.
Easing a recessed unit out of the wall
A recessed electric fireplace is fastened into its framed opening, and its trim covers the joint with the wall. The manual describes how the unit is removed, usually by unfastening screws behind the trim and sliding the body forward.
Where the unit is hardwired, the breaker is switched off before any wiring is touched, and the connection is made safe. We support the unit as it comes out so the trim and wall finish are not cracked. After the repair, it goes back, the fixings are tightened and the trim gaps are checked. If the trim was painted in, it is scored carefully so the paint does not tear the wall finish.
Front glass, screens and cleaning
The front of an electric fireplace is often a special glass or screen that is part of the flame effect. Abrasive cleaners scratch it, and sprays can seep into the unit.
Manuals give cleaning instructions for the front, usually a soft cloth and a mild cleaner applied to the cloth, not the glass. A cracked or scratched front is swapped for the one listed for your model, which often means taking the unit off the wall or out of its opening. We follow the manual's steps for that. Fingerprints on the inside of the glass mean the unit has been opened before, and that is worth knowing.
What we test on units in Lake Geneva
- Rating label copied: model, serial, volts and watts
- Insert, wall unit or recessed unit removal allowed for
- Repair total compared with a new unit where it gets close
- Old parts taken away and the area cleaned
Before a part is ordered
The flames stopped moving. Is that expensive?
Often not. A flicker rod that has slipped off its motor shaft is a quick fix. A failed motor is replaced with the maker's part, which is still a modest repair.
What does a repair visit in Lake Geneva cost?
Diagnosis costs nothing, and you see the part and labor price before any order goes in. Approve the repair within 72 hours and 10% comes off it.
More services in Lake Geneva
-
-
-
-
-
-
Learn more about electric fireplace repairAll services in Lake Geneva
Bring back the heat in your Lake Geneva electric fireplace
Once the heater, flames and remote work again in Lake Geneva, our satisfaction guarantee stays behind the repair.
Free Inspection