
Local chimney crown repair for Hilliard homes
Coat it or recast it? A free crown inspection tells Hilliard homeowners which one their crown needs, and why.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Crown repair experts for Hilliard chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Hairline cracks on a sound slab get sealed, which keeps the job smaller and the price lower.
- Free inspection and estimateWe map the cracks on your Hilliard crown and check the brick under it at no charge.
- Upfront pricing, no hidden feesCoating and recasting are both priced on paper, so you see the difference before choosing.
- 100% satisfaction guaranteedIf the finished crown is not right, tell us and we come back to put it right.
Water in the firebox after rain
Water on the firebox floor or rust on the damper after rain can come from the crown. Water that gets through a crown crack drops into the core of the chimney, runs down inside the masonry and finds its way out at the smoke chamber or the damper.
When a house in Hilliard shows that symptom, the crown goes near the top of the list, along with the top of the flue. When the crown is the entry point, the repair goes there, and the damper and smoke chamber are checked for the damage the water has already done. We check the cap and flashing on the same free trip to your Hilliard crown; call (904) 920-5495.
About 35 miles, as the crow flies, separate Hilliard from Jacksonville. Hilliard sits in Nassau County.
What's Included
Crown repair jobs we handle in Hilliard
- Forms set with an overhang past every face of the brick
- Reinforcement placed inside the slab to control cracking
- Bond break sealed around each flue tile
- Chimney cap refastened once the new crown can hold it
How It Works
Map, prep, coat or pour, cure
-
Crown checked from the roof
We look at the slab, the brick right under it and the seal around each flue, then write down the option that fits with its price.
-
Old top cleaned or torn off
For a coating, the crown is cleaned and the wider cracks filled. For a recast, the old top comes off down to sound brick.
-
Coating brushed on or crown poured
A coating goes on in dry weather inside the maker's temperature range. A recast is formed with a slope, an overhang, a drip groove and a sealed joint at every flue.
-
Curing, then the cap goes back
New concrete stays covered and damp while it cures. The cap is refastened once the crown can hold it, and we show you the finished top.
Local Conditions
The yearly crown check in Hilliard
NFPA 211 calls for a yearly chimney inspection, and the crown gets a close look each time. New cracks and cracks that have widened are measured against the last visit.
Caught early on a chimney in Hilliard, most crown cracks still take a coating.
10% off your first service when you book today
Booking crown repair in Hilliard today? Your first service with us is 10% off.
Hairline, open and through cracks
Crown cracks come in three broad kinds. Hairline cracks are surface lines you can see but not fit a fingernail into. Open cracks have width and depth, and water pools in them. Through cracks run the full thickness of the slab, so a piece moves when pressed or water drains straight into the chimney.
Hairline cracks on a sound crown are the case for a coating. Open cracks need filling first, and a coating after. Through cracks, especially several of them, mean the crown has become separate pieces, and the reliable repair is a new crown. The crack map records which kind each crack is.
Weather windows for a crown coating
A crown coating is only as good as the day it goes on. The coating maker's data sheet sets the rules: a surface and air temperature range, a clean and dry surface, and no rain due before the coating has had time to set, unless the crown can be protected.
That means crown coatings are scheduled for dry spells, and a day that looked fine can be called off if showers move in. We also cool a sun-heated crown with a light mist where the data sheet allows it, since a hot surface can make the coating skin over too fast.
Taking a failed crown down to sound masonry
Removing a crown is careful demolition on a roof. The old concrete or mortar is broken out in manageable pieces with hand tools or a small breaker, lowered in buckets or bags, and kept out of the flue with a cover over the tile.
The goal is to reach sound masonry: brick that is firm, mortar that is hard. Where the top courses are loose or soft, removal continues down through them, and they are relaid before the new crown is formed. How far down we expect to go, and how that changes if the brick is worse than it looks, is agreed before the first piece comes off.
Free Inspection
Coat or recast, and the reasons
- Crown type found: mortar wash, cast-in-place or precast
- Crack map with widths, and whether the slab is still sound
- Reinforcement and concrete mix for a cast crown
- Chimney cap removal and reinstallation, with how it is fastened
FAQ
Crown repair questions from Hilliard
Is Hilliard inside your crown repair area?
It is. On your Hilliard chimney we first identify the type of top and map its cracks, then put a coating or a recast in writing. Call (904) 920-5495 to book.
When does a crown coating need to be redone?
The coating maker's data sheet gives the guidance, and the yearly check tells us in practice. A coating that has stayed flexible and firmly attached can be left; one that has cracked or peeled is cleaned off and renewed.
Our Services
More services in Hilliard
-
Gas Fireplace Repair and Service Gas units that will not light, stay lit or burn right, plus service.
-
Chimney and Fireplace Inspection The whole system checked against NFPA 211, with findings shown on site.
-
Chimney Liner Installation and Relining A listed stainless liner sized to the appliance and run the full flue height.
-
Chimney Masonry Repair Cracks, open joints and damaged brick repaired with matched mortar.
-
Chimney Waterproofing Brick that soaks up rain treated with a breathable repellent.
-
Gas Fireplace Installation Direct-vent and B-vent gas fireplaces, framed and vented to the manual.
Learn more about chimney crown repairAll services in Hilliard
Seal or recast your crown in Hilliard
Crown work waits for dry weather, so call (904) 920-5495 early and the job in Hilliard is set around the forecast.
Free Inspection