Chimney damper replacement for Fruit Cove homes

Your Fruit Cove fireplace gets a damper that opens wide for the fire and shuts snug after it, with our satisfaction guarantee.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Family-owned damper experts serving Fruit Cove

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

A cap goes on the estimate when rain is what rusted the damper in the first place.

Free inspection and estimateYour Fruit Cove damper is run through its full travel and checked with a light at no charge.
100% satisfaction guaranteedIf the repaired damper does not open fully and close flat, we come back and make it right.
Family owned and operatedA family business does the diagnosis and the repair, so the person who quoted it answers for it.

Call (904) 920-5495 Free Inspection

Debris resting on the closed plate

A closed damper catches whatever falls down the flue: leaves, twigs, loose mortar and bits of flue tile. Over time that pile gets heavy enough that the plate cannot swing up past it, and the handle feels locked.

We clear the load from below where it can be reached safely, then check where it came from, because falling tile or mortar points to a separate problem higher up. Once the plate is clear, we work it through its full travel and check the seat. Damper stuck under debris in Fruit Cove? Our damper specialists offer a free inspection at (904) 920-5495.

Fruit Cove lies inland. Fruit Cove is part of St. Johns County.

Damper repairs we handle in Fruit Cove

Poker rods and notch brackets renewed
Rust scale cleared from the seat the plate closes on
Debris cleared off the smoke shelf behind the plate
New damper set at the height the code asks for

Call (904) 920-5495 Free Inspection

How chimney damper replacement runs

Handle and plate tested
With the fireplace cold, the control is worked through its travel and the plate checked from below with a light.
Failed part named
Pivots, plate, frame or control, the part that failed is written down with the repair options and prices.
Freed, rehung or replaced
Sound parts are cleaned and freed, a plate is matched to its frame, or a new damper is set at code height.
Travel and seal confirmed
The plate must open fully and close flat under the light before the job is done.

Old dampers in Fruit Cove fireplaces

Damper wear depends on the fireplace's age and use rather than the town. A frame that has been heated for many seasons shows it in pivot wear and small cracks.

We grade the frame on every Fruit Cove visit so you know whether a new plate is worth fitting to it.

10% off any service booked within 72 hours of inspection

Damper work booked within the 72 hours is discounted, and it does not have to be your first job.

Call (904) 920-5495 Free Inspection

Keeping rain off a repaired damper

Rain falling straight down a flue with no cap ends its drop on the damper plate, the lowest metal in its path. A damper that sits wet after every storm rusts at the seat and the pivots first, which is where a damper fails.

So the question after a rust repair is how the water got there. A cap with a screen over the flue stops most of it, and it is priced as a separate line when the chimney has none. Without that, a new plate or a freed damper starts rusting again from the top side, where it cannot be seen from the room.

What we check before calling the damper done

Four things have to be true before a damper repair counts as finished. The handle or crank moves the plate through its full travel without force. The plate reaches its fully open position and stays there. It closes flat on its seat with no gap visible under a light. And the handle positions are clear to whoever lights the next fire.

We run those checks with you watching, before we pack up. If any one of them fails, the job is not finished, and we say what is still needed. The result is written on the invoice, with the parts used, so the next inspection starts from a known condition.

What an open throat lets us see

With the damper plate open or removed, the throat becomes a window into the lower chimney. The smoke chamber walls, the smoke shelf and the bottom of the flue liner can be seen with a light from the firebox.

We use that view on every damper job. Cracks in the smoke chamber, gaps in its walls or a flue tile that has slipped are noted with their location, even though they are separate repairs with their own estimates. That way a damper replacement is never priced blind to what sits right above it. You also learn whether the flue above the throat needs attention before the new damper goes in.

What we measure on dampers in Fruit Cove

Damper type identified: throat damper, top seal or factory-built unit
Frame condition: cracks, lug wear and how it sits in the masonry
Top-sealing damper priced alongside when the throat is hard to reach
Old parts removed and the firebox cleaned before we leave

Before a damper part is ordered

Does a repaired throat damper seal like a top damper?

Not quite. A throat damper closes metal on metal, while many top dampers close on a gasket. A repaired throat damper still stops the steady draw of an open flue, and we price both when both would work.

What does the damper visit in Fruit Cove cost me?

The inspection is free, and the repair is priced in writing before any work. Book the damper job within 72 hours of that inspection and 10% comes off as well.