Local chimney cap replacement in Clay Hill

Bent, rusted or missing cap in Clay Hill? Local pros inspect it free, replace it and check the crown it sits on.

Family owned and operated
Free inspection and estimate
Same-day service available
Upfront pricing, no hidden fees

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

or call (904) 920-5495

Why Choose Us

Chimney cap specialists who measure in Clay Hill first

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off when you book today

Birds, rain and embers are all kept out by one cap, and it still leaves room for the fire to draw.

Free inspection and estimateWe measure every flue on your Clay Hill chimney at no charge before any cap is ordered.
Upfront pricing, no hidden feesThe cap model, its metal and the fastening are priced together, so the total is clear.
Workmanship warrantyOur fitting and fastening carry the workmanship warranty, with the cap maker's terms in writing.

Call (904) 920-5495 Free Inspection

What to tell us when you call

A few details on the phone help us arrive prepared. Tell us whether the chimney is brick or a framed box with siding, how many flue tiles you can see from the yard, whether a cap is there at all, and what made you call: water, noise, animals or rust. If there is a label or a maker's name on the old cap, mention it.

The Clay Hill visit then starts with a ladder long enough for the roof and a cap sizing kit, and every detail is confirmed on site before anything is priced. Nothing is ordered on the strength of the phone call alone. Tell us at (904) 920-5495 what the cap on your Clay Hill chimney looks like now.

Counted as a direct line, Jacksonville and Clay Hill are roughly 25 miles apart. The county for Clay Hill is Clay County.

What's Included

What a new chimney cap includes in Clay Hill

Every flue tile measured inside and out
Screen openings checked against Florida code R1003.9.2
Screen open area sized so the fire still draws
Nest material cleared before the cap goes on

Call (904) 920-5495 Free Inspection

How It Works

Measure, match, clear, fasten

Every flue tile measured
On the free visit we measure each tile inside and out, and how far it stands above the crown.
Cap picked from the maker's chart
Model, metal grade and screen come from the sizing chart and our own numbers, never from the old cap.
Old cap off, new cap fastened
Set screws, a clamp band or masonry anchors are tightened to the maker's instructions, firm enough for a hard blow without cracking the clay.
Screen checked, debris hauled off
We check the mesh along every edge, clear out any nest material, haul away the old cap and show you the finished top.

Local Conditions

Flue tiles cut flush with the crown in Clay Hill

Some flue tiles stop level with the crown, which leaves most single-flue caps nothing to grip. A cap forced onto a flush tile works loose in the wind.

For chimneys in Clay Hill like that, the estimate offers an outside-mount cap over the crown or a way to raise the tile.

10% off your first service when you book today

A measured, fastened cap booked today takes 10% off a first service with us.

Call (904) 920-5495 Free Inspection

Hood height and the draft it leaves

The gap between the top of the flue tile and the underside of the cap's hood is the path smoke takes out of the chimney. Too small a gap throttles the flow; too large a gap lets rain blow in under the hood. Cap makers publish the hood height for each model and size, and BIA's residential chimney note advises getting the maker's information on how a cap affects gas flow before choosing one.

We set the cap so the tile top sits within the range the maker gives, measured rather than judged by eye. That measurement is recorded, so if the draft ever changes, the first thing to check is already written down.

The half-inch and three-eighths rule for screen openings

Florida's residential code sets the screen opening size on a masonry chimney spark arrestor with two spheres. An opening may not let a sphere larger than 1/2 inch pass, which holds back embers large enough to start a roof fire. It also may not block a sphere smaller than 3/8 inch, which keeps the mesh open enough for the chimney to breathe. Screens outside that window fail in opposite ways: too coarse lets embers out, too fine clogs with soot and slows the draft. Any cap we propose has its mesh checked against both limits, and caps sold for other uses, such as gas vents or roof vents, may not meet them.

What to look for from the yard after a storm

Binoculars and a clear day are enough for a first look after bad weather. Stand where you can see the top of the chimney and check four things. Is the cap still square on the tile, or leaning? Is the lid flat, or lifted at one corner? Is the screen continuous all the way around, or is there a dark gap? Are there fresh rust streaks, screws or metal pieces on the roof below?

Any one of those is a reason to call before the next storm, and none of them needs you on a ladder. If you can, take note of which side of the chimney the damage faces, since it helps us plan the visit.

Free Inspection

What sets the cap on your estimate

Metal and grade named: galvanized, a stainless type, or copper
Hood height above the tallest tile, per the maker's drawing
Access for sweeping: which part lifts off and how it refastens
Anything near the chimney on the roof that belongs to a roofer

FAQ

Cap questions we hear in Clay Hill

Can a cap go on if the crown is cracked?

A single-flue cap can, if the tile itself is sound, though the crown still lets water in around it. A full-crown cap needs sound concrete to anchor into, so the crown is repaired first.

Do you install caps on metal chimneys?

Metal chimneys from a fireplace maker take the cap that maker lists for the system, so a replacement comes from the same maker. We identify the model before ordering anything.

Our Services