
Chimney chase cover replacement in Clay Hill by local pros
A single free visit in Clay Hill to measure and look under the old top, before anything is cut.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
About Us
Why Clay Hill trusts local pros with chase tops
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Rotted plates found under chase tops in Clay Hill are shown to you and priced on their own line before anyone touches them.
- Free inspection and estimateWe measure your Clay Hill chase and look under the old top at no charge before anything is quoted.
- Upfront pricing, no hidden feesMetal, gauge and any framing repair each get their own priced line, and that total is what you pay.
- Workmanship warrantyThe new top, its collars and its fasteners are covered by our workmanship warranty, written on the estimate.
Soft trim at the top of the chase
Trim that gives under a thumb, siding swollen at the top course, or paint peeling in a band just under the skirt all say water has been getting into the chase. That damage comes from a failing top, and it still has to be dealt with before a new cover goes on, because a cover screwed into soft wood will not hold. When we lift the old top on your Clay Hill chase, we probe the top plates and sheathing and write any repairs as their own line. The cover is then fastened into sound material. A chase cover specialist can be up on your Clay Hill roof with a tape measure soon after you phone (904) 920-5495.
Clay Hill lies within Clay County. Clay Hill sits inland, more than about six miles from the coast.
Our Services
Your new chase top in Clay Hill, part by part
- Old chase top, screws and sealant taken off the chase
- Small gap at each pipe left open, as the manuals require
- Metal grade and gauge written on your Clay Hill estimate
- Rust streaks on Clay Hill siding traced to cover, collar or cap
How It Works
From tape measure to hose test in Clay Hill
-
Chase and pipe measured
On the free visit we measure the outside of the chase over the siding and read the fireplace model from its plate or manual.
-
A top made to your chase
The cover is formed with cross-breaks or a pitch, a skirt with a drip edge and a raised collar sized to your pipe.
-
Old top off, new top fastened
We pull the old cover and check the framing, then fasten the new top through its skirt and clamp a sealed storm collar at the pipe.
-
Hose test before we leave
Water run over the new top has to leave from every edge. If it puddles anywhere, we reshape it before the job is done.
Where We Work
Long wet spells and Clay Hill chase covers
Weeks of afternoon rain keep a flat chase top in Clay Hill wet more often than dry, and the metal never gets the drying time it needs. Rust spreads from the low spot outward.
A cover that drains dries between showers. So we build every Clay Hill top with a fall of at least a quarter inch per foot away from the pipe, or crossed breaks where the maker allows them.
10% off your first service when you book today
A made-to-measure chase top for your Clay Hill home, 10% off as a first service booked today.
The raised collar around each pipe hole
Each pipe that passes through a chase top gets a collar: a short upright ring formed around the hole, so water crossing the top has to climb over it before it can reach the opening. One maker's drawing calls for a 2-inch collar that is soldered, welded or spun, rather than a separate ring stuck on with caulk that can fail. The collar's inside diameter follows the pipe's listed outside diameter plus the clearance the manual gives. We make the collar part of the top itself, so there is no seam at its base for water to find, and we check its height with a rule before the top goes up.
What we find when the old top comes off
Lifting a leaking chase top shows the history of the leak. Dark staining on the top plates, soft spots in the sheathing, rusted nail heads and slumped insulation are the kinds of things we find. Sometimes the framing is sound and only needs to dry out. Sometimes the top plate has rotted enough that fasteners will not hold.
We probe what we can reach, describe what we found, and price framing and sheathing repairs apart from the cover, so its price stays clear. A new cover is not screwed down over wood that will not hold it, and the repair is done first.
Clearance inside the chase
Factory-built chimneys are listed with a required air space between the pipe and anything combustible, including framing and insulation. One manual for a common chimney series states 2 inches. When a chase top is off, the top of that space is visible, and it is a good time to check that insulation has not slumped against the pipe and that a previous repair did not add framing too close to it.
Anything inside that clearance is pulled back or noted. The same manual calls for ceiling firestops at each floor of the chase or every 10 feet of height, and a missing one is written up for the chase repair.
Free Inspection
Checks behind a chase cover price
- Fireplace maker and model read from the unit's rating plate
- Framing and sheathing condition under the old top, priced separately
- Water test of the new top where the roof allows safe footing
- Paint or powder-coat finish, if chosen, and its color
FAQ
Chase cover questions from Clay Hill
Can rotted framing be fixed at the same time?
Yes, and it has to be solid before a new cover is fastened down. Rotted top plates or sheathing are repaired first and shown on the estimate apart from the cover.
What metal do you recommend for a chase top?
It depends on the size of the chase and the exposure. Our starting point is stainless steel in a heavier gauge than the minimum, and the estimate names the grade and gauge.
Our Services
More services in Clay Hill
-
Gas Fireplace Installation Direct-vent and B-vent gas fireplaces, framed and vented to the manual.
-
Fireplace Installation New and replacement fireplaces, factory-built or masonry, with their chimneys.
-
Chimney Leak Repair Water coming in at the chimney, traced by testing and stopped where it enters.
-
Chimney Repair Any failed part of the chimney, found, named and fixed in a sensible order.
-
Chimney Rebuild Loose, cracked or leaning masonry taken down to sound brick and relaid.
-
Chimney Animal Removal Animals and nests cleared from the flue, debris cleaned out, entry closed off.
Learn more about chimney chase cover replacementAll services in Clay Hill
New chase cover, measured on site
Our chase cover pros measure, look under the old top and write the price before any work. Call (904) 920-5495 to set a time in Clay Hill.
Free Inspection