Family-owned hearth repair for Bayard fireplaces

Cracked, hollow or sunken hearth in Bayard? Local, family-owned pros check the base first, and the inspection is free.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Hearth experts who measure before they tile

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Your estimate in Bayard names the setting mortar, the grout and the cure time.

Free inspection and estimateYour hearth in Bayard is sounded, leveled and measured on a free visit before any price is written.
100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.

Call (904) 920-5495 Free Inspection

Chipped edges from dropped logs

The front edge of a hearth takes the impact when a log slips off the grate or an armload of wood lands too hard. Tile chips there first, and a chipped edge lets water and cleaning products into the bed. On a stone slab, a chip can be filled and shaped. Tile is replaced unit by unit.

For chipped edges on a hearth in Bayard, we price the individual repairs and tell you if an edge profile or a tougher tile would take the knocks better. The free inspection comes with a written price.

Within Jacksonville city limits, Bayard is its own named neighborhood. Bayard is in Duval County.

From loose tile to a new slab

Stone slabs rebedded, glued or replaced
Loose brick on the hearth relaid in fresh mortar
Ash dump frames and lids reset or replaced
Heat-cracked tile near the opening rebedded

Call (904) 920-5495 Free Inspection

How our hearth pros repair a hearth in Bayard

Describe the hearth on the call
Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.
Sounding and measuring
Each tile is tapped, the slab's level is read and the extension is measured against the opening.
Support first, surface second
A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.
Cured before heat, then handed back
The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.

Screens and door frames on an inland hearth in Bayard

Away from salt air in Bayard, the steel of a fireplace screen or door frame is not fighting chlorides. What loosens those frames is heat and repeated opening, which work the anchors loose in the hearth.

We reset loose frames on hearths in Bayard with new anchors and fill the old holes, so a rocking frame stops cracking the tile around it.

10% off any service booked within 72 hours of inspection

Cracked or loose hearth? Approve the repair inside 72 hours of our look and save 10%.

Call (904) 920-5495 Free Inspection

Setting materials chosen for the heat

The strip of extension near the opening can get hot during a long fire, while the far edge stays at room temperature. Setting mortars, grouts and sealants each list their limits on their data sheets, and a product that is fine on a bathroom floor may not be rated for the zone closest to the fire.

We choose the setting material and grout from their data sheets for the heat they will see, and write the product names on the ticket. Inside the firebox, where the fire sits, the floor is firebrick in refractory mortar rather than tile products, which keeps each material inside its limits.

Setting a one-piece stone slab

A single stone slab spans its whole extension, so any void in its bed becomes a span. Granite, slate and marble all break when a heavy point load lands over a gap. Setting a slab means a full, even bed, with the slab lowered and pressed down so the mortar reaches its edges and corners.

Before a slab goes back, we check that the base is flat and sound, since a slab bedded onto a hump rocks on it. Heavy slabs take two or more people and a plan for lifting them without cracking them. That handling goes on the estimate too, because it is real work.

The seam between the inner hearth and the extension

The line where the firebox floor meets the extension separates two parts that heat differently and may rest on different support. A rigid, mortar-filled joint there cracks sooner or later. Some movement is expected, and the joint has to be sized and filled with that in mind.

We clean the joint out, check that neither side has dropped, and fill it with a material suited to the heat on the firebox side. If one side has dropped, the joint is not the repair, and the support below goes on the estimate instead. A filled crack over a moving slab is only cosmetic.

What we check on a hearth in Bayard before pricing

Every tile sounded, with hollow units counted on a sketch
Support under the extension identified, from below where access allows
Loose units reset on a full bed of the named setting mortar
Cure time before the first fire, written with the finish date

Before your hearth is lifted

Is a same-day hearth visit possible in Bayard?

Same-day visits happen when a slot is open that day. Describe the hearth on the call and we give you the earliest time we have.

Can my hearth be made bigger without tearing it out?

It can when the existing slab is sound. An addition on proper support, joined cleanly to the old slab, brings the size up, and new tile across both hides the seam. The estimate shows the new outline.