Local chimney cap replacement for Bayard homes
A cap sized from the tile on your Bayard roof, measured for free by local cap pros, with no guessing from the ground.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Chimney cap specialists who measure every flue
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Stainless, copper or galvanized, we explain what each metal means for your roof before you pick.
- Free inspection and estimateWe measure every flue on your Bayard chimney at no charge before any cap is ordered.
- Upfront pricing, no hidden feesThe cap model, its metal and the fastening are priced together, so the total is clear.
- Workmanship warrantyOur fitting and fastening carry the workmanship warranty, with the cap maker's terms in writing.
Choosing copper
Some owners pick copper for looks. A copper cap starts bright, darkens to brown and, over enough seasons, can turn green, and that patina is a protective layer rather than damage. Copper comes with one strict rule: it should not touch galvanized or bare steel where rain can bridge the two, or the steel corrodes.
So a copper cap going onto the Bayard crown is held down with copper or stainless screws, and every old galvanized clip and screw comes off the crown with the previous cap. The fastener metal is recorded next to the cap metal, so the pairing is on file for the next person. Lost the cap in the last blow? Call (904) 920-5495 and ask for the first dry day in Bayard.
Bayard sits in Duval County. Bayard is inland.
What a new chimney cap includes in Bayard
- Tile height above the crown checked for a secure fit
- Nest material cleared before the cap goes on
- Lid or screen that comes off for the sweep
- Cap on your Bayard home fastened to hold in a storm
Measure, match, clear, fasten
-
Tiles measured on the roof
Each flue tile is measured inside and out, along with its height above the crown.
-
Cap style and metal chosen
Slip-in, band-mount or full-crown, in a metal suited to the roof, with a screen that meets the Florida code.
-
Flue cleared, cap fastened
Any nest or debris comes out of the flue, then the cap is set and fastened for wind.
-
Fit and screen checked
We check that the cap sits square, the hood height matches the chart and the screen comes off for the sweep.
Caps on furnace and water heater flues in Bayard
When a masonry flue carries exhaust from a furnace or water heater, that appliance's instructions govern what sits on top of it. Some rule out a fine screen.
We read those instructions before capping an appliance flue in Bayard.
10% off any service booked within 72 hours of inspection
Say you want the 10% off when you book the cap, and we note it.
A screen that comes off for the brush
Florida's code also expects the screen or cap to come off so the flue can be cleaned. So the lid should be hinged or bolted, or a screen panel held by screws that are reachable from the roof. Caps that were glued down, or screwed through the lid into the crown, defeat that expectation and turn a routine sweep into a repair job.
We fit caps whose lid or screen comes away with hand tools, and we show you which fasteners hold it in case another contractor needs to know. The same design lets the mesh be brushed clean on the roof, which is where soot deposits build first.
How a galvanized cap runs out of zinc
A galvanized cap is steel protected by a zinc layer that corrodes in the steel's place. The zinc wears away fastest where water lingers: along the screen wires, at folded seams, and around fastener holes.
Once it is gone in a spot, the steel beneath rusts, and rust takes up more room than the steel it came from, so the wires swell and break. Streaks of orange on the crown or the brick below are the visible sign of that stage. By then recoating is not practical, since the zinc cannot be put back on the roof, and the cap is replaced in a longer-lived metal with the old fasteners removed as well.
Water the cap cannot stop
The cap guards only the flue opening. The crown around it takes the same rain, and when it cracks or pulls away from the flue tile, water enters the top of the masonry and runs down inside the chimney. The result looks just like an uncapped flue from below: water in the firebox and rust on the damper. That is why a cap visit includes a close look at the crown surface and the joint where the crown meets the tile. When crown repair is needed, it appears as its own line, priced apart from the cap, making it clear that the new cap was not sold as a cure for a crown leak.
What sets the cap on your estimate
- Fastening method: set screws, clamp band or anchors into the crown
- Crown condition under a full-crown cap, written as its own line
- Access for sweeping: which part lifts off and how it refastens
- Fastener metal matched to the cap to avoid galvanic corrosion
Cap questions we hear in Bayard
Can you tell me which cap I need over the phone?
Not reliably. Tile size, tile height and crown condition decide the cap, and those are measured on the roof. What you describe on the phone helps us bring the right ladder and sizing kit.
Do you install caps on metal chimneys?
Metal chimneys from a fireplace maker take the cap that maker lists for the system, so a replacement comes from the same maker. We identify the model before ordering anything.
More services in Bayard
-
-
-
-
-
-
Learn more about chimney cap installation and replacementAll services in Bayard
Replace a missing or rusted cap in Bayard
Our cap pros measure every flue on your Bayard chimney and write the cap and metal down. Call (904) 920-5495.
Free Inspection