Local chimney repair in Bayard
What must be done now and what can wait are kept apart, line by line, when we inspect a chimney in Bayard for free.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Chimney repair experts for Bayard homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
The mortar, brick and metal named on the estimate are the ones that go on your chimney.
- Family owned and operatedThe family business that inspects your Bayard chimney is the one that repairs it and answers for it.
- No hidden feesEach repair line carries its own price, and nothing gets added once the work is under way.
- Workmanship warrantyEvery finished repair line is covered by our workmanship warranty, and the estimate names those lines.
Movement cracks, and when to wait
Cracks in a chimney are clues about movement. We measure it, note whether it follows the mortar or cuts through the brick, and look for a matching gap where the chimney meets the house. Some cracks are old and stopped moving long ago; others are still growing, and those point to a footing that settled or wall ties that let go.
Sometimes the right move on a cracked Bayard chimney is to mark the crack and measure it again on a later visit before recommending anything structural. Rebuilding a chimney that has stopped moving would be money spent on the wrong problem. Something loose, cracked or leaking up there? The Bayard inspection is free at (904) 920-5495.
Bayard is a neighborhood within the City of Jacksonville. Bayard sits in Duval County.
What our chimney repair covers in Bayard
- Spalled brick cut out and replaced one unit at a time
- Rusted caps and chase covers replaced and fastened for wind
- Cracked flue tiles found, with the fireplace status in writing
- Framing clearance and fireblocking checked from the attic
Find it, rank it, fix it, show you
-
Roof, attic and firebox checked
We look at the chimney from all three places in one visit and note each defect where we find it.
-
Cause traced before the fix
Stains, cracks and loose brick are followed back to the part that let water or heat through.
-
Repairs from the top down
Cap and crown come first, then brick and joints, then flashing, using the mortar and metal named on your estimate.
-
Cleanup and a final walk-around
Debris leaves with us, and we show you each finished repair plus anything worth watching.
Wet brick that dries slowly in Bayard
Brick is porous. Water that gets in at the top of a chimney spreads through the masonry and can take days to dry out, leaving white deposits where it leaves the face.
On chimneys in Bayard we use those deposits as a map. A band of white under the crown or along the roof line shows us where to look for the leak.
10% off any service booked within 72 hours of inspection
Cracked or leaking chimney? Book the repair within 72 hours of our visit and 10% comes off.
Cutting out a single damaged brick
A brick that has lost its face can be replaced on its own when the bricks around it are sound. The mortar around it is cut out, the damaged unit broken out in pieces so its neighbors are not disturbed, and the cavity cleaned.
The new brick is buttered with mortar on its top, bottom and ends, slid in, and the joints packed and tooled. The hard part is the match: size, color and texture. A salvaged brick or a close modern match is chosen before the day, and you hear in advance how close the match is likely to be, so a lighter patch on an old face is not a surprise.
Sizing a cap screen so it does not choke the draft
A screened cap keeps sparks, rain and animals where they belong, but a screen also restricts the flue. For a screen that acts as a spark arrestor, FBC Residential R1003.9.2 sets a ratio: the open area of the mesh must be four or more times the open area of the flue it covers.
The cap has to stand tall enough, and its mesh has to be open enough, for the flue beneath it. Screens also clog with soot and debris over time, and a clogged screen can push smoke back into the room. Checking and clearing the screen is part of every trip to the top of the stack.
Matching mortar color on a repaired chimney
New mortar dries a different color from joints that have weathered for years, and bright gray lines across an old face are hard to unsee. Matching starts with the sand, which gives mortar much of its color and texture, then pigment added in small measured amounts.
We mix test batches, let them dry, and compare them with the existing joints in daylight before repointing a visible face. Some difference is expected at first and softens as the new joints weather. Whether color matching is part of the job, and how close the match should be, is agreed face by face before any joint is filled.
Each defect, its cause and its price
- Flashing metal and method for the roof covering on your house
- Access plan covering ladders, roof protection and the rooms inside
- Trades outside our work, such as roofing or gas supply, named
- Cleanup and debris removal, inside and outside, noted for each line
Chimney repair questions from Bayard
Can the repairs be done in stages?
Yes. The estimate can be split into stages, beginning with safety and water entry, then damaged masonry, then wear items. Each stage leaves the chimney better than before, and items that must be done together stay together.
Will you work with my roofer?
Yes. Flashing and chimney work fit best into a re-roof schedule, and we can sequence our part with the roofer's. The estimate names which items belong to each trade.
More services in Bayard
-
-
-
-
-
-
Stop the leak or crack on your Bayard chimney
Our chimney experts trace the damage in Bayard back to the part that failed, then fix that part. Call (904) 920-5495.
Free Inspection