Local chimney inspection for Bayard homes
Every flue in the stack and every appliance it serves, inspected free in Bayard and explained in plain words.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local inspection experts for Bayard homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
A chimney inspection in Bayard covers the firebox, the flue, the roof and the attic as one system.
- Free inspection and estimateThe chimney inspection at your Bayard home costs nothing, and a clean result is reported as clean.
- Locally ownedA locally owned business shows you what it sees, so the findings are yours to check.
- No hidden feesAny repair that comes out of the inspection gets its own line and price before you decide.
A flue too dirty to judge
Creosote hides what an inspection needs to see. Tile cracks, open joints and missing mortar hide under a heavy coat of deposit, and judging a flue in that state would mean guessing. When deposit hides the tile, the inspection says so, notes what it could see, and recommends a sweep before the flue is judged.
Booked together, the two fit in one visit: the brush goes through first and the inspection follows on clean tile. That saves your Bayard household a second appointment and gives the findings something solid to stand on. The findings name the sections that were judged clean. Buying or selling in Bayard? Call (904) 920-5495 and tell us the closing date.
Bayard is part of Duval County. Bayard is an inland community.
What a chimney inspection covers in Bayard
- Smoke chamber walls looked at for gaps
- Deposit in the flue graded
- Crown, cap and flashing checked from the roof
- Findings for your Bayard home explained on site
How your Bayard inspection runs
-
The reason noted first
We ask why you want the inspection, whether a sale, a new stove, a storm or a smell, and plan around it.
-
Firebox up to the flue
Firebrick, hearth, damper, smoke chamber and flue tile are checked with a strong light from below.
-
Roof and attic next
Crown, cap, flashing and brick are checked from the roof where safe, and clearances from the attic.
-
Findings explained on site
We go over each finding with you on site, and any repair gets its own price.
Gas appliance vents in Bayard chimneys
Gas appliances make no creosote, but their exhaust carries water vapor and carbon monoxide, so the vent has to stay clear, connected and sized for the appliance.
We follow any gas vent in your Bayard chimney from the appliance to the top.
10% off any service booked within 72 hours of inspection
Nothing to pay for the inspection, and a sweep booked alongside it gets the discount.
The crown seal around the flue tile
The crown is the concrete, stone or metal top of a masonry chimney, and the code asks three things of it: a slope that sheds water, a drip edge, and a sealant-filled bond break where the flue tile passes through, following ASTM C1283 (FBC R1003.9.1).
The bond break matters because the tile heats and grows faster than the crown. Without a flexible joint, the tile pushes on the crown until one of them cracks. From the roof, the seal is checked for gaps, sealant gone hard, and cracks radiating from the tile corners, which are a sign it has already failed.
Fireblocking at each floor and ceiling
At every floor or ceiling the chimney passes, the gap between the masonry and the framing is supposed to be closed with noncombustible material fastened in place, so a fire cannot race up the void beside the chimney (FBC R1003.19). Against wood joists, the code says that fireblocking must support itself or rest on strips of metal or metal lath.
In an attic or an unfinished lower level, the inspection looks for that material. Open gaps, missing pieces, or combustible fill such as wood scraps or paper-faced insulation are recorded as findings. Gaps are measured so any repair can be sized from the findings.
Every flue in the stack, including the idle ones
NFPA 211 has the yearly inspection take in every flue in the chimney and every appliance connected to it, including ones rarely used. A second flue that once served a furnace or a closed-off fireplace can hold nests, fallen tile or water damage with no one watching.
The code also wants a masonry divider, a wythe of 4 inches or more, between flues in the same chimney (FBC R1003.13), and a missing or crumbled wythe lets smoke cross from one flue into another. Each flue is recorded by what it serves, or that it serves nothing. Unused flues get their caps checked too.
Checked on every inspection in Bayard
- Damper opened and closed through its travel, with seal and frame noted
- Flue area compared with the fireplace opening or the appliance connector
- Framing clearances checked in the attic and where floors and ceilings meet the stack
- Stove connector support, joints, pitch and thimble condition recorded
Before your chimney is inspected
How long does a chimney inspection take?
A single fireplace with roof and attic access fits in part of a morning or afternoon. Extra flues, a stove connector, or a deeper look before a sale or after a chimney fire add time, and the booking call gives you a window.
Can you inspect a chimney on a house I am buying?
Yes. NFPA 211 lists a sale among the times for a deeper look, and the visit covers every flue, the attic side of the stack and the connected appliances. Book with the closing date in mind.
More services in Bayard
-
-
-
-
-
-
Learn more about chimney and fireplace inspectionAll services in Bayard
Get your Bayard chimney checked end to end
Before the first fire of the season in Bayard, our specialist checks the flue from the firebox to the cap at no charge.
Free Inspection