Wall mounted electric fireplace installation in Switzerland

Local installers in Switzerland who frame the opening, route the cord cleanly and list any electrician work up front.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Installers who read the manual first

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Electrician work is named and priced apart, so you see exactly who does what.

Free inspection and estimateThe wall and circuit at your Switzerland home are checked against the unit's manual at no charge.
100% satisfaction guaranteedA unit left crooked, loose or not working to its manual gets a return visit and a fix at no cost.
Family owned and operatedThe family crew that measures your wall is the one that mounts the unit, so nothing gets lost between visits.

Call (904) 920-5495 Free Inspection

An old gas line in the firebox

Fireplaces that once had gas often still have a gas pipe or valve key in the firebox wall. Before an electric insert goes in, that line has to be capped properly, and that is a job for a gas contractor. The firebox is cleaned only after the line is capped, never before.

We name that step on the estimate, with who does it, and schedule the insert after it is done. The cord route is then planned so it stays clear of the capped fitting. Old gas line in a fireplace you want to convert in Switzerland? Call (904) 920-5495, and our installers will look at it for free.

Switzerland is in St. Johns County. Switzerland is an inland community.

What an electric fireplace install covers in Switzerland

Rating label checked against the circuit
Electrician work planned and listed separately
Cords routed out of sight, never on extensions
Old units removed and hauled away

Call (904) 920-5495 Free Inspection

How our installers fit an electric fireplace in Switzerland

Manual read in advance
Send the model number, and the installation section is read before we arrive.
Wall and circuit checked
Studs, wall contents, clearances and the circuit are checked against the manual.
Mounted, framed or inserted
The unit is hung, set into a framed recess or placed in a prepared firebox, with electrician work done in sequence.
Tested and handed over
Flame, heat, remote and cycling are tested with you, and the controls explained.

Flame-only evenings in Switzerland

Many units run the flame with the heater off, which suits evenings when heat is not wanted.

We set those controls up with you at every Switzerland handover.

10% off any service booked within 72 hours of inspection

A wall-hung unit or an electric insert, either install comes 10% off.

Call (904) 920-5495 Free Inspection

Fitting an insert to an old firebox

Electric inserts are made for a range of firebox sizes, and the manual gives the minimum and maximum opening they fit, along with the depth needed behind. A trim kit from the same maker hides whatever gap remains between insert and opening.

We measure the firebox opening at the front and the back, since many fireboxes taper, and check the depth. If the opening falls outside the insert's range, you hear that before anything is bought or installed. The trim is chosen to cover the gap neatly without blocking the insert's air paths. A firebox that is slightly too large can often be managed with a wider trim kit from the same maker.

Preparing the firebox for an insert

A firebox that has burned wood holds soot, ash and loose debris, and a smoke shelf behind the damper that collects more. That material has no place around an electrical appliance.

Before the insert goes in, the firebox is cleaned out, the smoke shelf cleared where it can be reached and loose firebrick or mortar noted. The damper area is prepared for the flue closure. Firebox damage that affects the insert's fit or safety is written up first, since an insert should sit in a sound, clean space. Loose firebrick is not rebuilt for an electric insert, but it is noted so it does not fall behind the unit later.

Testing everything before we leave

An installation is finished when the unit works as the manual says. We run the flame effect through its settings, run the heater long enough to watch it cycle, test the remote and thermostat and confirm the unit is secure and level.

For inserts, we check that the flue closure holds and the trim sits tight. For recessed units, we check the trim gaps and the airflow paths. You see each test, and any fault is dealt with before we pack up. The manual and any warranty card from the maker stay with you. We also show you how to switch the unit off completely for cleaning or a long absence.

What we check on the wall in Switzerland

Rough opening and clearances taken from the unit's manual
What else shares the circuit, checked against the unit's load
Old unit removed and hauled away, where one is replaced
Controls set up and every function tested at handover

Before the unit goes in

Do you install electric fireplaces in Switzerland?

Yes. We install wall-mounted, recessed and insert electric fireplaces across St. Johns County, Switzerland included. Give us the model number on the phone, and the manual gets read ahead of the visit.

Do you charge for the first visit in Switzerland?

No. The first visit to check the wall and circuit is free, and the install is priced line by line. Book it within 72 hours of that visit, and 10% comes off.