Recessed electric fireplaces installed in St. Nicholas
Electric fireplace installation in St. Nicholas with clean trim, a tidy room and every function tested before we go.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Installers who read the manual first
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Every function is tested with you watching before we call the job finished.
- Free inspection and estimateThe wall and circuit at your St. Nicholas home are checked against the unit's manual at no charge.
- 100% satisfaction guaranteedA unit left crooked, loose or not working to its manual gets a return visit and a fix at no cost.
- Family owned and operatedThe family crew that measures your wall is the one that mounts the unit, so nothing gets lost between visits.
No chimney, no vent
Nothing burns in an electric fireplace, so it needs no chimney, no vent and no outside wall. That makes it possible in rooms where no other kind of fireplace could go, as long as the wall and the circuit are right. That freedom is the main reason people choose electric for rooms without an existing fireplace.
What it still needs is a wall that can carry it, the clearances in its manual and a power supply that matches its rating label. We check those three on a free visit and price the install. Want a fireplace in a room with no chimney in St. Nicholas? Phone (904) 920-5495 and book our installers.
St. Nicholas is one of the named neighborhoods of Jacksonville. St. Nicholas falls within Duval County.
Mount, frame, insert, test
- Heater outlet clearances marked on the wall
- Trim fitted and airflow paths kept clear
- Manual read before the first visit
- A written install plan for your St. Nicholas room
How electric fireplace installation runs
-
Manual read in advance
Send the model number, and the installation section is read before we arrive.
-
Wall and circuit checked
Studs, wall contents, clearances and the circuit are checked against the manual.
-
Mounted, framed or inserted
The unit is hung, set into a framed recess or placed in a prepared firebox, with electrician work done in sequence.
-
Tested and handed over
Flame, heat, remote and cycling are tested with you, and the controls explained.
What matters for an install in St. Nicholas
Salt air plays no part in an indoor electric fireplace in St. Nicholas, well inland. The wall, the circuit and the manual decide how the install goes.
Those are what we check on the first visit.
10% off any service booked within 72 hours of inspection
Mounting, trim and the finish around the unit are all discounted.
Running the flame without the heat
Many electric fireplaces let you run the flame effect with the heater off. The flame is made by lights shining through a moving rod or a programmed pattern, and it uses far less power than the heater.
That makes the fireplace useful on evenings when heat is not wanted. At handover we show you the settings on your unit and remote: flame only, heat only and both together, plus any brightness and speed controls. Knowing them from the start saves a call later. Some units also have separate ember-bed lighting and color settings, which we run through with you.
Remotes, thermostats and receivers
Controls range from a simple switch to a remote with a thermostat and timer. Some pair with a receiver inside the unit, and some offer an app.
We set the controls up at handover: batteries in, remote paired, thermostat set to a sensible starting point and the timer explained. If the model has a receiver switch, we show you where it is and how to reset the pairing if it is ever lost. The manual stays with you, with the relevant pages marked. If a wall switch controls the outlet, we label it so nobody turns the unit off by accident.
Taking out the old unit
When a new electric fireplace replaces an old one, the old unit comes out first. Wall-mounted units lift off their brackets. Recessed units are unfastened and slid out, and their old trim is removed.
The new unit's manual then decides whether the existing opening or bracket can be reused. Often the opening needs adjusting, since sizes vary between models. We price that adjustment on the estimate, and the old unit is hauled away unless you want to keep it. Brackets left from the old unit are removed and their holes filled if the new unit does not cover them.
What we check on the wall in St. Nicholas
- Studs, blocking or approved anchors for the mounting bracket
- Electrician work listed apart: circuits, outlets, hardwired connections
- Old gas line capped by a gas contractor, named in writing
- Old unit removed and hauled away, where one is replaced
Before the unit goes in
Can an electric insert go into my old wood fireplace?
Usually, if the opening falls within the insert's size range. We clean the firebox, shut the chimney off above it, set the insert and run the cord tidily.
How long does an installation take?
A wall mount can take a few hours. A framed recess or an insert with flue work takes longer, and any electrician work sets the pace. The estimate gives the expected time.
More services in St. Nicholas
-
-
-
-
-
-
Learn more about electric fireplace installationAll services in St. Nicholas
Electric fireplace installs in St. Nicholas
When the unit is on the wall in St. Nicholas, we run every function with you, under our satisfaction guarantee.
Free Inspection