Chimney flue repair for Sawgrass homes
Top tiles replaced from the roof or joints resurfaced with a listed system, sized so your Sawgrass fireplace still draws.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Family-owned flue experts serving Sawgrass
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Your Sawgrass flue is mapped tile by tile before any repair is priced.
- Free inspection and estimateThe flue at your Sawgrass home is swept, examined from both ends and mapped at no charge.
- 100% satisfaction guaranteedIf the repaired flue is not sound and correctly sized when we finish, we make it right.
- Family owned and operatedA family business maps the flue and does the repair, so the plan and the work stay in one set of hands.
A flue defect listed in a sale report
Chimney findings in a home sale report often read as cracked flue liner, further evaluation recommended. That gives a buyer a worry and a seller a deadline, but no scope.
Our visit turns the line into a plan. We locate each defect by height, say which repair suits it and put a price beside it, so both sides can agree on the same work. Buying or selling in Sawgrass with a flue on the report? Share that page when you phone (904) 920-5495; our specialists inspect the flue for free.
Sawgrass sits on the coastline. Sawgrass is part of St. Johns County.
Flue repairs we handle in Sawgrass
- Seal around the top tile remade
- Every defect written down by height
- Flue repair for fireplaces and appliance flues alike
- Cure time respected before the first fire
How chimney flue repair runs
-
Swept and examined
The flue is cleaned, then looked over from the roof and the firebox with a light and mirrors.
-
Mapped and measured
Each defect is placed by height and wall, and the flue size is checked against what it serves.
-
Repaired by the chosen method
Top tiles swapped from the roof, damaged sections coated with a listed system, or a relining price when repair will not hold.
-
Checked and cured
The finished flue is examined from both ends and left to cure before the first fire.
Keeping a coastal flue dry after repair
On a coastal chimney, the joint where the top tile passes through the concrete takes rain from every direction, and it has to shed that water without cracking.
In Sawgrass we remake that seal with every top tile job and check it again at the yearly inspection.
10% off any service booked within 72 hours of inspection
Flue repair earns the 10% off even if you have booked with us before.
Clay flue tile and its standard
Clay flue lining is made to ASTM C315, one of the lining types the code lists for masonry chimneys. The tiles are fired clay sections, round, square or rectangular, stacked one on another up the chimney.
Replacement tiles are matched by their outside and inside dimensions, because a new section has to sit on the one below and line up on the inside. Where a tile size is no longer made, the repair above that point may need a different approach. We measure the existing tile before ordering, and the size goes on the estimate so the part is not a guess.
Why a generic patch is not a flue repair
R1003.11.1 limits flue linings to four kinds: clay tile made to ASTM C315, lining systems carrying a UL 1777 listing, factory-built chimney sections whose listing allows installation within masonry, and other approved materials able to take flue gases and condensate up to 1,800 degrees Fahrenheit without corroding, eroding, softening or cracking.
A tube of fireplace patch or a bag of masonry mortar pushed into a crack from above meets none of those. It may hide the crack, but it does not restore a lining. So a flue repair from us means new tile bedded in refractory mortar, or a resurfacing system with its listing, and the estimate says which one.
Tiles that have slipped out of line
Flue tiles are meant to be supported on all sides and stacked in line, one squarely on the next. When a tile slips, the joint above and below it opens and the inside of the flue develops a step.
A slipped tile cannot be pushed back from the top, and a coat over the step does not realign it. If the displaced sections are near the top, they can sometimes be replaced from the roof. Lower down, a slip usually means relining. We record the position and size of any step, since that fact drives the whole repair choice.
What goes on the flue map in Sawgrass
- Sweeping needed before the flue can be judged, listed on its own
- Resurfacing system named with its UL 1777 listing, where one is used
- Dividers between neighboring flues checked where they can be seen
- Gaps at the smoke chamber and at the top end of the lining
Before a flue repair is chosen
Is flue repair cheaper than relining?
When the damage suits a repair, it is usually the smaller job. When it does not, stacking repairs on a failing flue costs more in the end, and we price relining instead so you can compare.
Can my water heater flue be repaired the same way?
Sometimes, but gas appliance flues follow the code's fuel gas chapter and the appliance's own venting rules. We read the appliance plate first and choose a repair or liner that suits it.
More services in Sawgrass
-
-
-
-
-
-
Learn more about chimney flue repairAll services in Sawgrass
Seal the flue in your Sawgrass chimney
Not sure what shape your Sawgrass flue is in? The inspection is free, and the repair is 10% off if you book it within 72 hours.
Free Inspection