Wall mounted electric fireplace installation in Sawgrass

Electric fireplace installation in Sawgrass with clean trim, a tidy room and every function tested before we go.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local electric fireplace pros for Sawgrass homes

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Your Sawgrass install is planned from the model's own manual, not from a generic template.

Free inspection and estimateThe wall and circuit at your Sawgrass home are checked against the unit's manual at no charge.
100% satisfaction guaranteedA unit left crooked, loose or not working to its manual gets a return visit and a fix at no cost.
Family owned and operatedThe family crew that measures your wall is the one that mounts the unit, so nothing gets lost between visits.

Call (904) 920-5495 Free Inspection

Closing the chimney behind an insert

With an electric insert doing the heating, the chimney above it no longer has a job. Left open, it lets conditioned air escape and lets moisture and drafts in around the insert. Closing the flue also keeps insects and debris from falling into the firebox around the insert.

So the flue is closed. Either the damper is sealed shut or a sealing damper goes on the top tile, and the cap stays in place against rain. The method is written on the estimate so it can be reversed later. Converting a fireplace in Sawgrass and wondering about the chimney? Call (904) 920-5495 for a free look.

In the 2020 Census, Sawgrass counted 5,385 residents. Sawgrass borders the coast.

Mount, frame, insert, test

Recessed openings framed to the manual's rough size
Old units removed and hauled away
Remote paired and controls explained
Wall and circuit checked at your Sawgrass home for free

Call (904) 920-5495 Free Inspection

How electric fireplace installation runs

Manual read in advance
Send the model number, and the installation section is read before we arrive.
Wall and circuit checked
Studs, wall contents, clearances and the circuit are checked against the manual.
Mounted, framed or inserted
The unit is hung, set into a framed recess or placed in a prepared firebox, with electrician work done in sequence.
Tested and handed over
Flame, heat, remote and cycling are tested with you, and the controls explained.

Keeping moisture away from an insert in Sawgrass

An open flue lets damp outside air drift down to the firebox. Near the ocean, closing the flue above an electric insert matters for the unit's electronics as much as for comfort.

In Sawgrass we seal the damper or fit a top seal and write down which, so it can be reopened later.

10% off any service booked within 72 hours of inspection

Chosen the unit already? Take 10% off the install by booking inside 72 hours of the free wall check.

Call (904) 920-5495 Free Inspection

Why the plug goes straight into the wall

Makers tell owners to use a grounded wall outlet directly, nothing in between, and they warn off extension cords and power strips. A heater's steady current can overheat a light cord or a strip not built for it.

That rule shapes the install. If the nearest outlet is out of reach of the unit's cord, an electrician adds one where the cord can reach. We do not stretch a cord across a wall or hide an extension behind the unit. The outlet plan is written on the estimate, with who does the electrical work. A plug that feels warm after an hour of heat is a sign the outlet or its connection needs an electrician's attention.

Framing a recess to the rough opening

Recessed units need an opening framed to the rough size in their manual: width, height and depth, measured to the framing, not to the finished wall. Too small and the unit will not slide in. Too large and the trim will not cover the gap.

We frame the opening with studs and headers sized for the wall, add blocking where the unit's brackets or trim fasten, and check the depth behind for wiring, pipes and ducts. The manual also says which framing and finish materials are allowed around the unit, and we follow it. Once the unit is set, its brackets are fastened to the blocking so it cannot shift when the trim goes on.

Checking what is inside the wall

Before any wall is opened for a recessed unit, we find out what is in it. Studs, electrical cables, plumbing and ductwork can all sit where the opening wants to go, and an exterior wall may hold insulation that needs to be kept intact.

We locate what we can from the surface, then open a small inspection hole where needed. If something in the wall blocks the planned position, you hear the options: move the unit, reroute the obstacle through the right trade, or choose a wall-mounted model instead. That conversation happens before the full opening is cut. On exterior walls, any insulation disturbed by the opening is put back around the new framing.

What we check on the wall in Sawgrass

Studs, blocking or approved anchors for the mounting bracket
Electrician work listed apart: circuits, outlets, hardwired connections
Heater outlet clearances marked for shelves and screens
Cleanup of dust and packaging before we leave

Before the unit goes in

Do you install electric fireplaces in Sawgrass?

Yes. We install wall-mounted, recessed and insert electric fireplaces across St. Johns County, Sawgrass included. Give us the model number on the phone, and the manual gets read ahead of the visit.

Will I need a new circuit?

It depends on the unit's rating label, its manual and what else is on the circuit. If a dedicated circuit is needed, an electrician adds it, shown as its own item.