Fireplace hearth repair for homes in Riverside

From one cracked tile to a new slab, a family-owned crew handles hearth work in Riverside and backs it with our guarantee.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Hearth experts who measure before they tile

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Floor and trim distances around the hearth are measured and written down.

Free inspection and estimateYour hearth in Riverside is sounded, leveled and measured on a free visit before any price is written.
100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.

Call (904) 920-5495 Free Inspection

Burn marks on the floor past the hearth

Small dark spots on a wood floor or rug a short way past the hearth are ember marks. They say the extension is not deep or wide enough for the fire being built, or that the screen is not closing the opening. Either way, the floor is taking heat the hearth was built to take.

Your opening and extension in Riverside get measured, and the ticket says whether the fix is a larger extension, a better screen or both. Local hearth specialists, a free inspection, and one call to (904) 920-5495.

Riverside is one of the named neighborhoods of Jacksonville. Riverside is in Duval County.

Hearth repair work we take on in Riverside

Loose brick on the hearth relaid in fresh mortar
Crumbling grout raked out and renewed
Your hearth in Riverside measured and sketched before work
Heat-cracked tile near the opening rebedded

Call (904) 920-5495 Free Inspection

The order of a hearth repair

Describe the hearth on the call
Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.
Sounding and measuring
Each tile is tapped, the slab's level is read and the extension is measured against the opening.
Support first, surface second
A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.
Cured before heat, then handed back
The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.

Support and settling under a hearth in Riverside

Away from the coast in Riverside, a hearth's trouble starts with its support and with heat. A slab that settles, or a setting bed that shrinks away from the tile, shows up as cracks and hollow sounds.

We sound and level the hearth first, so the estimate for your home in Riverside fixes the cause as well as the surface.

10% off any service booked within 72 hours of inspection

Resetting tiles or extending the hearth, either job comes 10% off.

Call (904) 920-5495 Free Inspection

Wood forms found under an old slab

Some extensions were poured over plywood or boards that were meant to come out and never did. Once the work is done, nothing that burns may stay against the underside of a hearth or extension, which makes forgotten formwork a code violation however sound the slab looks. It is also a weak point, because wood under a slab can rot and take the slab's bearing with it.

The fix is to remove the wood and give the slab proper noncombustible support, or to break out the slab and pour a new one on the right base. We tell you which after seeing the underside, and the finding goes into the estimate.

Room for movement at the hearth's edges

Where a tiled hearth meets a wall, a raised platform or the firebox, a rigid grout joint has no room to move. Heating, cooling and settling push on that edge, and the tile or grout there cracks first. The movement joint guidance in the TCNA Handbook calls for soft joints where tile meets other materials and changes plane.

At a hearth the soft joint has to handle heat as well, so its filler is chosen for the temperature at that spot, and a joint beside the firebox stays noncombustible. We mark where the movement joints go on the sketch, so the next person does not grout over them.

Setting a one-piece stone slab

A single stone slab spans its whole extension, so any void in its bed becomes a span. Granite, slate and marble all break when a heavy point load lands over a gap. Setting a slab means a full, even bed, with the slab lowered and pressed down so the mortar reaches its edges and corners.

Before a slab goes back, we check that the base is flat and sound, since a slab bedded onto a hump rocks on it. Heavy slabs take two or more people and a plan for lifting them without cracking them. That handling goes on the estimate too, because it is real work.

What we check on a hearth in Riverside before pricing

Hearth and extension measured against the opening size and R1001.10
Every tile sounded, with hollow units counted on a sketch
Loose units reset on a full bed of the named setting mortar
Hearth pad on a factory-built unit checked against its manual

Before your hearth is lifted

Is the hearth inspection in Riverside really free?

Yes. We measure and check the hearth, show you what we found and leave a written estimate at no charge. You decide afterward, with no pressure from us.

Do you work on hearths for factory-built fireplaces?

Yes. We follow the unit's listing and manual for the pad size and material, and use listed products where the maker calls for them. Have the model number ready when you call if you can find it.