Call(904) 920-5495

Gas fireplace vent repair in Riverside

Caps too close to windows, decks or corners in Riverside moved to meet the clearances, with the new route drawn out first.

  • Fully licensed and insured
  • Locally owned
  • Family owned and operated
  • Same-day service
Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Gas fireplace venting experts for Riverside homes

  • Locally owned in Jacksonville
  • Family owned and operated
  • 100% satisfaction guaranteed
  • Free inspection and estimate
  • Same-day service available
  • 10% off any service

Horizontal runs get a level on them, since slope matters to both vent types.

  • Free inspection and estimateThe vent on your Riverside gas fireplace is traced from the collar to the cap and measured against the code at no charge.
  • Upfront pricing, no hidden feesEach section, fitting and reroute is priced on its own line before any pipe is cut or replaced.
  • 100% satisfaction guaranteedIf the flame, the draft or the shutdown problem is not fixed by the vent repair we quoted, we come back.
Call (904) 920-5495 Free Inspection

A fireplace that spills when fans run

Room-air gas fireplaces can be overpowered by a strong kitchen hood or bath fan, which reverses the pull. Exhaust then pours out at the draft hood rather than rising. Opening a window during the test often shows how much the fans are pulling.

A smoke test with the fans on and off shows it, and units fitted with a spill switch should shut the gas off when it happens. Gas fireplace that acts up when the range hood runs in Riverside? Call (904) 920-5495.

Riverside lies within Duval County. Riverside sits away from the coastline.

Vent work on Riverside gas fireplaces

  • B-vent caps raised to the roof pitch table
  • Restrictors set to the manual after changes
  • New vent routes drawn before any cutting
  • Roof covering work named for a roofer
Call (904) 920-5495 Free Inspection

From collar to cap in Riverside

  1. Identify the system

    The manual and pipe markings tell us the vent type, size and maker.

  2. Trace the run

    With the unit off and cool, we follow the vent and check joints, supports and clearances.

  3. Repair with listed parts

    Joints are reseated, damaged sections replaced and crowded caps moved.

  4. Test and record

    We fire the unit, check flame and draft, then note every fix.

Remodels and vent clearances in Riverside

A new window, door or porch on a house in Riverside can leave a vent cap too close to an opening.

We measure the cap against the code before the finish work goes on.

10% off any service booked within 72 hours of inspection

Vent work in Riverside is discounted whether the fix is a resealed joint or a new run.

Call (904) 920-5495 Free Inspection

What Type B vent is

Type B gas vent is double-wall pipe for natural-draft gas appliances. Section 502.1 of Florida's fuel gas code requires Type B and BW gas vents to be listed and labeled and tested to UL 441, and the appliance's manual names the diameter.

One maker's B-vent fireplaces use a 4-inch vent on one model and a 6-inch vent on others. The inner and outer walls keep the hot exhaust away from framing, and the space between them is part of the design. Replacement sections match the listing and the diameter the manual calls for. Single-wall pipe is not a substitute anywhere a Type B vent is required.

The draft hood and room pressure

Natural-vent gas fireplaces have a draft hood where room air mixes with the exhaust before it rises. One maker requires the draft hood to be installed in the same atmospheric pressure zone as the combustion air inlet to the appliance.

When exhaust fans pull the room's pressure down, the vent can stall and spill at the hood. We test for spillage with the house's fans running, and on units that carry a spill switch, check that the switch shuts the gas off as designed. A spill switch is a safety device, not a part to bypass.

Exhaust in the room

Any sign of exhaust in the room, a smell, stinging eyes or a carbon monoxide alarm, means the fireplace is switched off and windows go open. An alarm or anyone feeling ill means leaving the house and phoning 911 from the street.

Once the house is clear, the vent is traced for a separated joint, a leaking inner pipe, a blocked cap or spillage at the draft hood, and on sealed units the glass seal is checked too. The fireplace is not used again until the fault is found and fixed. A carbon monoxide alarm near the fireplace is worth having before any of this happens.

Clearances, slope and caps on paper

  1. Termination measured against Table 503.8 and the maker's chart
  2. Elbows counted against the system's limits
  3. Flame watched on a test run after every repair
  4. A written list of findings and fixes, collar to cap

Gas fireplace vent questions from Riverside

Could the vent be why my gas fireplace in Riverside shuts off?

It can be. A blocked cap, a leaking inner pipe or a badly pitched run can all put the flame out. We test the vent first, then the controls.

Can a vent cap be moved farther from a window?

Yes, where a new route fits the maker's rules and the code's clearances. We draw the route before anything is cut.

More services in Riverside

Learn more about gas fireplace ventingAll services in Riverside

Fix the vent on your Riverside gas fireplace

Our venting pros trace your Riverside vent from collar to cap and write each fix down. Call (904) 920-5495.

Free Inspection

Call the chimney and fireplace experts

(904) 920-5495

Free inspection and written estimate

Call (904) 920-5495