Local chimney crown repair in Riverside
Concrete chips on your Riverside roof point back to the crown they came from. That is where our free inspection starts.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Crown repair experts for Riverside chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Our crews do crown work in Riverside themselves, from the first crack map to the cured slab.
- Free inspection and estimateWe map the cracks on your Riverside crown and check the brick under it at no charge.
- Upfront pricing, no hidden feesCoating and recasting are both priced on paper, so you see the difference before choosing.
- 100% satisfaction guaranteedIf the finished crown is not right, tell us and we come back to put it right.
How long a cracked crown can wait
A few fine cracks can wait a short while, but not indefinitely. Water that gets through keeps working in the masonry below, and a crown that could have been coated can reach the point where it has to be replaced, along with the top courses of brick under it.
Deciding when to act on a crown in Riverside is easier with three facts in hand: which stage the crown is at, what a coating would do now, and what the likely scope would become if the cracks open further. That lets you weigh timing against the size of the job. The same page also notes what to watch for between now and then. One phone call to (904) 920-5495 is all a free crown inspection in Riverside takes.
Cummer Museum of Art and Gardens can be found in Riverside. Riverside sits about 6 miles from Jacksonville, measured directly.
What's Included
Crown repair jobs we handle in Riverside
- Loose top courses relaid before the new crown is cast
- Reinforcement placed inside the slab to control cracking
- Fresh concrete kept damp and covered while it cures
- Chimney cap refastened once the new crown can hold it
How It Works
Map, prep, coat or pour, cure
-
Crown checked from the roof
We look at the slab, the brick right under it and the seal around each flue, then write down the option that fits with its price.
-
Old top cleaned or torn off
For a coating, the crown is cleaned and the wider cracks filled. For a recast, the old top comes off down to sound brick.
-
Coating brushed on or crown poured
A coating goes on in dry weather inside the maker's temperature range. A recast is formed with a slope, an overhang, a drip groove and a sealed joint at every flue.
-
Curing, then the cap goes back
New concrete stays covered and damp while it cures. The cap is refastened once the crown can hold it, and we show you the finished top.
Local Conditions
Plain steel in crowns away from the coast
Away from salt, the steel inside a cast crown is at less risk of rusting, but it still needs its full cover of concrete. Steel lying on the brick or near the surface rusts from ordinary rain and splits the slab.
When we recast a crown in Riverside, the reinforcement sits on supports within the thickness of the slab so the concrete surrounds it.
10% off your first service when you book today
Booking crown repair in Riverside today? Your first service with us is 10% off.
Relaying the top courses before a new crown
The last few courses of brick under a crown take the most water when the crown fails, so they can be the loosest on the chimney. Brick that lifts by hand, joints that crumble, or faces that have flaked away mean those courses need relaying before a new crown goes on.
Relaying means taking the brick down, cleaning it or replacing damaged units, and laying it back level and plumb with fresh mortar. The new crown then sits on a firm, flat base. That work is listed separately from the crown, since it is a job in its own right.
What goes into the bond break at the flue
The bond break is the flexible joint between the crown and each flue tile. It lets the tile grow with heat without pushing on the concrete. The code calls for it to be caulked, following ASTM C1283, and the BIA detail shows a backer rod with sealant over it.
In practice we wrap the tile with a compressible material before the concrete is placed, then rake the top back and fill it with a primed backer and a sealant suited to heat and weather. The finished joint stays flexible. A crown poured tight against the tile, with no gap at all, is the fault this detail exists to prevent.
Setting a precast crown on a mortar bed
A precast crown arrives cured and is set on a bed of mortar on top of the chimney. BIA Technical Note 19B calls for a bond break between the brickwork and that setting bed, so the crown can move without cracking the brick, and for the joint at the flue liner to be primed, backed and sealed.
Precast crowns come with their overhang and drip groove formed in, which is one reason the same technical note rates them well. The limits are size, weight and access: the crown has to be lifted onto the roof and set level in one piece.
Free Inspection
Coat or recast, and the reasons
- Crown type found: mortar wash, cast-in-place or precast
- Repair method chosen, coating, patch or recast, with the reason
- Chimney cap removal and reinstallation, with how it is fastened
- Debris removal from the roof and gutters after the work
FAQ
Crown repair questions from Riverside
When does a crown coating need to be redone?
The coating maker's data sheet gives the guidance, and the yearly check tells us in practice. A coating that has stayed flexible and firmly attached can be left; one that has cracked or peeled is cleaned off and renewed.
Can a drip edge be added to my existing crown?
Not in a way that lasts. A drip edge has to be formed into the underside of an overhang, and a crown without an overhang has nowhere to put one. The fix is a new crown formed wider than the chimney.
Our Services
More services in Riverside
-
-
-
-
-
-
Learn more about chimney crown repairAll services in Riverside
Seal or recast your crown in Riverside
Crown work waits for dry weather, so call (904) 920-5495 early and the job in Riverside is set around the forecast.
Free Inspection