Local chimney masonry repair for Riverside homes
From shoulders to the top course, Riverside chimney masonry repaired with a mortar no harder than the wall, after a free check.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Brick and mortar pros for Riverside chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
We close the path the water took before we fix the damage it caused.
- Locally owned and operatedA locally owned business answers for the brick and mortar work on your Riverside chimney.
- Upfront pricing, no hidden feesEach area of the stack is priced on its own line, so you can see what each repair costs.
- 100% satisfaction guaranteedIf the repair does not look or hold the way we agreed, we come back and make it right.
Marking each problem by type
Masonry repair on your Riverside chimney begins with a map before any trowel comes out. We walk the roof, look at every face of the stack, and mark each problem by type: joints that have gone soft, units that have cracked or lost their faces, courses that have worked loose, and cracks that point to movement. Each one gets a cause beside it, because brick and mortar fail for reasons, and water is the first one we check. The estimate lists the areas with their sizes, the mortar type under ASTM C270, the brick source, and anything that has to be fixed first so the repair lasts. Loose brick or crumbling joints in Riverside? Ask for mortar samples when you call (904) 920-5495.
Riverside is a neighborhood within the City of Jacksonville. Riverside lies within Duval County.
What's Included
Mortar, brick and the water behind them
- Water path closed before any mortar is mixed
- Worn joints raked back to sound mortar
- Racked shoulders washed or capped to shed rain
- Stair-step cracks marked and measured on your Riverside chimney
How It Works
Map, match, rake, tool
-
Water path traced first
We check the crown, the cap, the shoulders, the weather side and the flashing before pricing joints or brick.
-
Joints raked, bad brick cut out
Worn mortar is raked back to sound depth, and cracked or spalled units come out without thinning the wall.
-
Matched mortar packed and tooled
Pre-hydrated mortar of the type on your estimate goes in, with salvaged or new brick matched for size and color.
-
Brick cleaned the gentle way
Smears come off with a brush and water while they are fresh, and no harsh acid touches the brick.
Local Conditions
Painted brick chimneys in Riverside
Paint on brick slows the escape of moisture. Water that gets in through a crack dries more slowly behind the film, and the face can peel or crumble underneath.
When a painted chimney in Riverside needs repair, we explain the options for the coating before any mortar work starts.
10% off your first service when you book today
Tell us it is your first service when you book, and 10% comes off the brickwork.
A stack pulling away from the house wall
A chimney built against a house is meant to move with it and stay against it. BIA's residential chimney note calls for single-wythe chimneys to be attached to the structure with corrosion-resistant metal ties at a set spacing. If those ties rust through, or were left out when the chimney was built, the chimney can separate from the wall, opening a gap at the top. The repair depends on the cause: new ties, work at the footing, or rebuilding the separated section.
We measure the gap at several heights and record it, and structural questions go to an engineer. Where the stack meets the siding, the joint is closed to weather at the face without filling the air space the code requires behind it.
Matching brick size to the old coursing
Brick sizes have changed over the years, and a modern unit may be slightly longer, shorter or thicker than the brick in an older chimney. A mismatch of even a fraction of an inch shows as joints that do not line up with the courses beside them.
Before ordering, we measure several existing units and the joint widths, and match both. If a close size cannot be found new, salvaged brick of the right size is an option. We name the brick we plan to use and where it comes from, so the match is agreed before work begins. Where a perfect match is not possible, the closest brick is placed where it shows least.
Reaching the stack without damaging the roof
Masonry repair means carrying brick, mortar and tools onto a roof and working there for hours. Shingles, tiles and metal roofing can all be damaged by foot traffic, dropped material or mortar splatter.
We plan access before the work starts: ladder positions that do not crush gutters, roof protection laid around the chimney, and mortar mixed on the ground where possible. For tall or steep chimneys, staging or scaffolding may be needed, and you know that before the job is booked. Any roof damage we find that was already there is pointed out before we begin. After the work, the roof around the chimney is swept and checked for debris.
Free Inspection
Mortar type, brick source and joint depth
- Crack readings: width, direction, and whether it is still moving
- Water entry points found, and the repairs that close them
- Cleaning method for mortar smears, without raw muriatic acid
- Protection of fresh joints from rain while they cure
FAQ
Masonry questions from Riverside
Can you repair only the damaged part of the chimney?
Yes, where the rest of the stack is sound. We repair the areas that have failed and close the water path that caused them. The estimate shows each area separately, which makes it clear what is included.
Can the masonry work go ahead while I am out?
Yes, for work on the outside of the chimney, as long as the roof is safe to reach. For a look from the attic or into the fireplace, someone needs to be there to let us in.
Our Services
More services in Riverside
-
-
-
-
-
-
Learn more about chimney masonry repairAll services in Riverside
Fix loose brick and mortar in Riverside
Our masonry pros map every face of your Riverside chimney and price each repair. Call (904) 920-5495.
Free Inspection