Local chimney liner installation in Riverside

One liner per appliance, sized to its collar, with alloy and insulation chosen from the listing during a free inspection of each Riverside flue.

Family owned and operated
Free inspection and estimate
Same-day service available
Upfront pricing, no hidden fees

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

or call (904) 920-5495

Why Choose Us

Chimney liner specialists who prove the flue first

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off when you book today

The liner size, alloy and length for your Riverside chimney go on an installation record.

Free inspection and estimateWe sweep and measure the flue in Riverside at no charge before any liner is ordered.
Upfront pricing, no hidden feesLiner size, alloy, insulation and cap are one written price, set before the order goes in.
Workmanship warrantyHow we install the liner is covered by our workmanship warranty, and the maker's terms come in writing.

Call (904) 920-5495 Free Inspection

Relining during a home sale

A buyer's inspection sometimes flags the flue: cracked tile, missing mortar, or no liner at all. A relining estimate answers that finding with a specific scope, which helps both sides negotiate on facts instead of guesses and tells the buyer exactly what will change.

If the work is done before closing, the installation record and the liner's paperwork go to the new owner with the house. Tell us the closing date when you call, and whether a permit is expected, so the Riverside schedule allows for it. If the work waits until after closing, the estimate still gives both sides a written scope to plan around. New stove or insert going into your Riverside home? Call (904) 920-5495 and we will size the liner.

Cummer Museum of Art and Gardens can be found in Riverside. Counted as a direct line, Jacksonville and Riverside are roughly 6 miles apart.

What's Included

What relining covers in Riverside

Old flue swept clean before anything goes in
Tee and clean-out fitted below a stove connection
Insert joined with the maker's stove adapter
Screened liner cap fastened at the top plate

Call (904) 920-5495 Free Inspection

How It Works

Sweep, prove, size, reline

Flue swept and proved
The old flue is cleaned and checked, and a test length or cone is lowered to confirm the liner will pass.
Liner sized to the appliance
The diameter comes from the stove collar, the insert or the fireplace opening, with insulation where the listing calls for it.
Liner lowered and connected
The liner goes down full height and joins a tee with a clean-out, or an adapter on the insert.
Top plate, clamp and cap
The top plate is fastened to the crown, the liner is clamped and trimmed, and a screened cap goes on.

Local Conditions

A new stove or insert in Riverside

A stove or insert set into an old masonry fireplace needs a flue sized to its collar. The big fireplace flue above it is too large and cools the exhaust.

For stoves and inserts in Riverside, we run a listed stainless liner from the collar to the top.

10% off your first service when you book today

A sized, listed liner booked today gets 10% off as your first service.

Call (904) 920-5495 Free Inspection

The tee and clean-out at the bottom

Where a stove connects through the chimney wall, the liner ends in a tee. Its branch passes through the wall opening to meet the stove's connector, and its bottom carries a removable cap.

That cap is the clean-out. When the liner is swept from the top, the deposit falls to the tee, the cap comes off, and the debris is emptied without disconnecting the stove from the wall. The tee is supported so the liner's weight does not hang on the connection, and the opening in the masonry around the branch is sealed so room air does not leak into the flue.

Breaking out tile that is in the way

When the old tile leaves too little room for the liner and its insulation, or pieces have shifted into the passage, the tile has to come out. It is broken from the top down with tools lowered on a rope or rods, and the pieces drop to the smoke chamber, where they are removed by hand.

The work is slow and noisy, and the room below is sealed off while it happens. Breaking out tile opens the flue to its full masonry size, which then becomes the space the liner and insulation have to fill. Tile removal is priced as its own line.

Sizing a liner for a gas appliance

Gas appliances are sized differently from wood. The flue for a gas appliance vented into masonry is sized from the venting tables in NFPA 54, the National Fuel Gas Code, and from the appliance's installation manual, and the Florida Building Code sends gas flue lining to its fuel gas chapter.

The tables account for the appliance's input, the height of the chimney and the length of any lateral run. Too large a liner lets the exhaust cool and condense; too small restricts it. When two gas appliances share a flue, the combined sizing rules apply, and we note which table was used. The appliance's rating plate gives the input figure the tables need.

Free Inspection

Size, alloy and listing on paper

Tee with a removable cap for clean-out below a stove connection
Insert adapter fitted and clamped to the insert's flue collar
Sweep of the old flue and smoke chamber before installation starts
Maker's instructions and the installation record left with you

FAQ

Relining questions from Riverside

Can relining be done in one day?

A plain liner in a straight, clean flue can go in within a day. Tile removal, insulation, crown repair or a new wall opening add time, and the estimate gives the schedule.

Can you reline a chimney that has bends in it?

Yes, with flexible liner, which follows offsets that rigid sections cannot. The flue is proved first to make sure the liner and any insulation will pass the bends.

Our Services