A top sealing damper fitted to your chimney in Ponte Vedra Beach

Order a top sealing damper for your Ponte Vedra Beach fireplace in the 72 hours after we measure, and a local family business takes 10% off the install.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Damper experts who measure before they order

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

The old throat damper is removed or fixed open so it can never drop shut.

Free inspection and estimateYour flue tile in Ponte Vedra Beach is measured and the crown checked on a free visit before any damper is ordered.
Upfront pricing, no hidden feesThe model, the handle position and any tile or crown work are priced in writing up front.
100% satisfaction guaranteedIf the lid does not seal or open the way we showed you, we return and adjust it.

Call (904) 920-5495 Free Inspection

The throat after the old damper comes out

Removing a rusted throat damper opens the throat and the smoke chamber above it to view, sometimes for the first time in years. Loose brick, open joints or a bare stepped chamber are easier to repair while the plate is out. It is also the moment to check the throat for anything that would snag the new cable.

When we fit a top damper in Ponte Vedra Beach, we look into the throat once the old plate is gone and tell you what we see. Any chamber work is priced separately, and you decide whether to do it now.

Ponte Vedra Beach falls within St. Johns County. Ponte Vedra Beach borders the coast.

From the tile measurement to the handle

Top sealing dampers set in the maker's adhesive
Round flues fitted with matching models
Worn gaskets, springs and cables replaced
Your Ponte Vedra Beach chimney's tile and crown checked first

Call (904) 920-5495 Free Inspection

The order of a top damper install

Tile measured on the roof
The flue tile's outside size, height and rim are checked on a free visit, with the crown around it.
Model ordered to fit
The damper is chosen from the maker's size chart for your tile and approved on the estimate first.
Frame set, cable run
The frame is set in the maker's adhesive, the old plate made safe and the cable run to the handle.
Adjusted and demonstrated
The lid is adjusted to seal, and you try the handle before we leave, with the cure time written down.

Stainless parts for a coastal chimney top in Ponte Vedra Beach

Ponte Vedra Beach is coastal, and chlorides in sea air corrode springs, hinges and fasteners that are not made for it. A top damper at the flue top takes that air every day.

For chimneys in Ponte Vedra Beach, we fit stainless top dampers and check that the spring and hinge parts are stainless too, naming the metal on the estimate.

10% off any service booked within 72 hours of inspection

The damper, the cable and the fitting are all discounted.

Call (904) 920-5495 Free Inspection

A sound tile to bond to

The adhesive that holds the frame bonds to the top of the flue tile. A tile with cracks near the top, a chipped rim or a loose section will not hold the frame, and the damper can shift or lift in wind.

We clean the tile rim and check it closely before fitting. Damaged tile at the top is repaired or replaced first, and that work is priced as its own line so you can see why it is needed. A tile that is sound but stained is cleaned back to firm material where the bead will run.

Open fully before every fire

Above everything else, a top damper has to be fully open before a fire is lit. A fire under a closed lid sends smoke and carbon monoxide into the room. The handle position shows whether the lid is open, and a look up the firebox confirms it.

The makers also say to leave it open until no fire remains and the ashes have gone cold. Closing it early on smoldering embers traps their smoke in the house. We cover both points at the walk-through, and write them on the ticket. A lid that is only partly open can also spill smoke, so the check is for fully open, not just unlocked.

Servicing an older top damper

Top dampers that have been in place for years may need a new gasket, a new spring, a cable or a lid. Makers support their models with replacement parts, and repairs like these are done from the roof and the firebox without removing the frame.

If the frame's bond to the tile has failed, or the model's parts are no longer made, a new damper may be the answer. We tell you which after checking it, and list the parts and prices. Availability is confirmed with the maker or its distributor before we quote, so the price does not rest on a part that cannot be had.

What we check before fitting a top damper in Ponte Vedra Beach

Tile height above the crown checked against the maker's minimum
Lid adjusted to close evenly on its gasket
Decorative gas appliance in the firebox checked for conflicts
Existing top damper serviced with the maker's parts

Before the damper is ordered

What does measuring for a top damper in Ponte Vedra Beach cost?

Nothing. Measuring the tile and checking the crown and throat are free, and the written estimate names the model and price.

What if I forget to open it?

The handle hangs in the firebox where it is easy to see, and we show you how to check the lid before lighting. Smoke at the opening is the sign it is closed, so put the fire out and open the damper.