Local chimney waterproofing for Penney Farms homes

Breathable silane or siloxane repellents for Penney Farms chimneys, applied the way the data sheet says once a free inspection clears the brick.

Family owned and operated
Free inspection and estimate
Same-day service available
Upfront pricing, no hidden fees

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

or call (904) 920-5495

Why Choose Us

Chimney waterproofing specialists who test before spraying

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off when you book today

Glass, skylights and roofing near your Penney Farms chimney are covered before a drop is sprayed.

Free inspection and estimateWe splash test your Penney Farms chimney at no charge and tell you if the brick needs treatment at all.
No hidden feesRepairs and repellent are separate lines, and nothing is added once the spraying starts.
100% satisfaction guaranteedIf treated brick still soaks up water where we sprayed, we come back and put it right.

Call (904) 920-5495 Free Inspection

Stucco and stone chimneys

Stucco, stone and concrete block chimneys can be treated too, depending on the product. The sheet for the siloxane repellent we apply lists portland cement stucco, natural stone and concrete masonry units among its surfaces, alongside clay brick. Each takes the product differently, so the trial patch matters more on these.

Stucco with open cracks lets water in behind the finish, and those cracks are repaired first. Stone chimneys with wide or open joints are repointed before any treatment. Where your Penney Farms chimney is not bare brick, the surface is named and the product checked against it. Call (904) 920-5495 and our waterproofing pros will test your Penney Farms brick for free.

The direct distance from Jacksonville to Penney Farms is about 24 miles. The county for Penney Farms is Clay County.

What's Included

Waterproofing work we do in Penney Farms

Crown, cap and flashing checked for openings first
Open joints and cracked brick repaired before treatment
Cure time after repointing taken from the data sheet
Treatment day at your Penney Farms home set for dry weather

Call (904) 920-5495 Free Inspection

How It Works

Splash, repair, patch test, flood

Water test on brick and joints
We wet the faces and watch where the brick drinks, and check the crown, cap and flashing for openings.
Openings repaired, then cured
Joints, brick, crown and flashing are fixed first, and the data sheet's cure time runs before any treatment.
Test patch, then a flood coat
A patch shows how your brick takes the product. Then it goes on from the bottom up with a low-pressure sprayer, wet on wet.
Splash test and paperwork
Treated brick should bead water and stay light. You get the product, the faces treated and the cure time in writing.

Local Conditions

Hurricane season rain on Penney Farms chimneys

Hurricane season, June through November, brings long, heavy rains to inland chimneys too. Brick that absorbs water on the weather side can stay damp for days.

After repairs, a breathable repellent on those faces cuts how much water gets in while still letting the wall dry.

10% off your first service when you book today

Brick staying dark after rain? Book today and 10% comes off your first service.

Call (904) 920-5495 Free Inspection

Protecting windows, skylights and shingles

Silane and siloxane products react with unprotected glass as well as brick, as BIA's note points out, and the note adds that these chemicals can etch glass. The maker of the product we apply adds paint, plants and asphalt-based materials such as roof shingles to the list of things to keep clear. So before any spraying, the glass in windows, skylights and doors close to the stack is covered, the roof surface around it is shielded, and plants below are protected as the directions describe. Any overspray that reaches an uncovered surface is washed off with soap and water straight away.

More is not better

A heavier coat of repellent can seem like better value. BIA's note says the coverage rate is critical, because putting on too much can cut the breathability of the masonry, and breathability is the whole reason for choosing a penetrant over a film. The maker of the product we use gives a coverage range per gallon that depends on how porous the surface is, and very dense brick takes less than soft brick. We work within that range, keep track of how much each face has taken, and record it in the job notes so the next treatment can be planned from real figures.

Water-based or solvent-based repellent

The active ingredient in a clear repellent is delivered in a carrier, either water or a solvent, that evaporates after the product has soaked in. BIA's note says the choice of carrier changes the conditions a product can go on in, and points out that green building programs set limits on solvent content. The two kinds also differ in odor, in clean-up and in how they behave on dense or damp surfaces. The product we name states its carrier, and we follow its limits on surface moisture, temperature and ventilation. The choice is explained if a solvent-based product is proposed.

Free Inspection

Repairs and treatment, priced apart

Cure time after repointing, taken from the product's data sheet
Faces treated, and surfaces left out such as the crown top
Application method and coverage rate from the maker's sheet
Existing sealer or paint identified before any product is chosen

FAQ

Waterproofing questions from Penney Farms

Do you waterproof chimneys in Penney Farms?

We do, as part of our chimney work there. A visit starts with a look at how water is getting in, and treatment is only recommended when the brick itself needs it.

Does the repellent change the color of the brick?

The product we use leaves little or no shine, though very dense brick can go a shade darker. You see the trial patch dry, next to untreated brick, before the rest is done.

Our Services