Local chimney cap replacement for Penney Farms homes
Caps for Penney Farms flues serving fireplaces and other appliances, matched during a free inspection to what each flue carries.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Chimney cap specialists who measure in Penney Farms first
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
We fit caps in Penney Farms ourselves, from the tape measure on the tile to the last screw.
- Free inspection and estimateWe measure every flue on your Penney Farms chimney at no charge before any cap is ordered.
- Upfront pricing, no hidden feesThe cap model, its metal and the fastening are priced together, so the total is clear.
- Workmanship warrantyOur fitting and fastening carry the workmanship warranty, with the cap maker's terms in writing.
A rusted cap
Orange streaks down the crown are one early clue that a cap is rusting. Behind them is usually a galvanized cap whose zinc coating has worn through, or a plain steel screen that was not made to resist corrosion. Rust weakens the mesh first, then the legs and the fasteners, until a gust lifts the whole thing off. On a roof in Penney Farms we replace it with stainless or copper, take the rusted fasteners out with it, and brush the loose scale off the crown so the stain stops spreading once the new cap is on. Lost the cap in the last blow? Call (904) 920-5495 and ask for the first dry day in Penney Farms.
Penney Farms sits about 24 miles from Jacksonville, measured directly. Penney Farms lies within Clay County.
What's Included
Cap replacement work for Penney Farms homes
- Every flue tile measured inside and out
- Slip-in, band-mount or full-crown style picked to suit the tile
- Screen openings checked against Florida code R1003.9.2
- Metal grade for your Penney Farms chimney named in writing
How It Works
Measure, match, clear, fasten
-
Every flue tile measured
On the free visit we measure each tile inside and out, and how far it stands above the crown.
-
Cap picked from the maker's chart
Model, metal grade and screen come from the sizing chart and our own numbers, never from the old cap.
-
Old cap off, new cap fastened
Set screws, a clamp band or masonry anchors are tightened to the maker's instructions, firm enough for a hard blow without cracking the clay.
-
Screen checked, debris hauled off
We check the mesh along every edge, clear out any nest material, haul away the old cap and show you the finished top.
Local Conditions
Rain on the damper in Penney Farms
Water on the damper after rain often means the flue has no cap. Rain falls straight down the tile and rusts the damper and the lintel below it.
A cap sized to the tile stops that, and we check the crown at the same visit so its cracks are not mistaken for the cap's job.
10% off your first service when you book today
Cap missing or rusted? Book today and save 10% on your first service.
The half-inch and three-eighths rule for screen openings
Florida's residential code sets the screen opening size on a masonry chimney spark arrestor with two spheres. An opening may not let a sphere larger than 1/2 inch pass, which holds back embers large enough to start a roof fire. It also may not block a sphere smaller than 3/8 inch, which keeps the mesh open enough for the chimney to breathe. Screens outside that window fail in opposite ways: too coarse lets embers out, too fine clogs with soot and slows the draft. Any cap we propose has its mesh checked against both limits, and caps sold for other uses, such as gas vents or roof vents, may not meet them.
Why a screen needs four times the flue's open area
Beyond the opening size, the code sets how much total open space the screen must have. After the wire and frame are subtracted, the screen's clear area has to reach at least four times the clear area of the flue outlet under it. Wire takes up part of every square inch of mesh, so the screen's overall size must be well beyond the flue opening to leave that much air path. The rule explains why a cap for a large flue is noticeably taller or wider than one for a small flue. A cap that looks generous from the yard can still fall short once the wire is counted, which is why we size from the maker's data rather than from appearance.
Metal chimneys take their maker's listed cap
A metal chimney that serves a factory-built fireplace was tested as a system, and its top cap was part of that test. The fireplace manual names the termination that belongs on it, by model.
A masonry-style cap clamped onto that pipe is outside the listing, and it can change how the chimney draws and how its layers stay cool. So when the cap on a metal chimney is damaged, the replacement comes from the chimney's maker for that model, ordered by the numbers on the fireplace plate. The framed box around such a chimney has its own sheet-metal top, which is a separate part with its own price.
Free Inspection
What sets the cap on your estimate
- Screen opening size checked against Florida code section R1003.9.2
- Fastening method: set screws, clamp band or anchors into the crown
- Old cap and its fasteners taken off the roof
- Which appliance each flue serves, confirmed before a cap is chosen
FAQ
Cap questions we hear in Penney Farms
Can the old cap be repaired instead of replaced?
A sound cap that has only worked loose can be reseated and refastened. Rusted mesh, a split band or a bent hood mean replacement. We tell you which one you have before any work is priced.
What does the screen on a cap have to meet?
Section R1003.9.2 of the Florida residential code sets the open area, the screen's heat and corrosion resistance, the opening size and removability for a spark arrestor on a masonry chimney. We check the cap we propose against each point.
Our Services
More services in Penney Farms
-
-
-
-
-
-
Learn more about chimney cap installation and replacementAll services in Penney Farms
Replace a missing or rusted cap in Penney Farms
Our cap pros measure every flue on your Penney Farms chimney and write the cap and metal down. Call (904) 920-5495.
Free Inspection