Local top sealing damper installation in Orange Park
Top damper installation in Orange Park with the model, handle position and any tile work priced in writing first.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Top sealing damper specialists in Orange Park
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Existing top dampers are serviced with the maker's own parts.
- Free inspection and estimateYour flue tile in Orange Park is measured and the crown checked on a free visit before any damper is ordered.
- Upfront pricing, no hidden feesThe model, the handle position and any tile or crown work are priced in writing up front.
- 100% satisfaction guaranteedIf the lid does not seal or open the way we showed you, we return and adjust it.
A top damper that no longer closes
An installed top damper that will not close tight has a stretched or frayed cable, a bracket that has slipped, a gasket that has hardened or a lid knocked out of line. Each has its own fix, and none requires a new damper. A lid that closes most of the way still lets air and rain through the gap.
We check the lid, hinge, spring and gasket on your chimney in Orange Park, adjust the cable and bracket, and replace worn parts with the maker's kit where one exists. The ticket lists each part.
Orange Park is an inland community. Orange Park lies on the St. Johns River.
Top damper work we take on in Orange Park
- Flue tiles measured for the right damper size
- Cracked tile rims repaired before fitting
- Owners shown how to open, close and lock the lid
- Make and model of your Orange Park damper written down
How our crew fits a top damper in Orange Park
-
Tile measured on the roof
The flue tile's outside size, height and rim are checked on a free visit, with the crown around it.
-
Model ordered to fit
The damper is chosen from the maker's size chart for your tile and approved on the estimate first.
-
Frame set, cable run
The frame is set in the maker's adhesive, the old plate made safe and the cable run to the handle.
-
Adjusted and demonstrated
The lid is adjusted to seal, and you try the handle before we leave, with the cure time written down.
Animals and idle flues in Orange Park
An idle flue in Orange Park is shelter for birds and animals whatever the distance to the beach. A closed top damper takes that shelter away.
Anything already in the flue has to be out before the damper goes on.
10% off any service booked within 72 hours of inspection
Two quotes for a top damper? You have 72 hours to compare them and still take 10% off.
Stopping odors from an idle fireplace
The smell of old soot in a room with a cold fireplace comes from air moving down the flue and across the deposits on its walls. The stronger the pull from the house, the stronger the smell.
Closing the flue at the top stops that movement, and a sweep removes the deposits that give off the smell. We check both and say which one your fireplace needs more. A top damper also keeps rain from wetting old deposits, and wet soot smells stronger than dry.
Factory-built chimneys and added parts
A factory-built fireplace and its metal chimney are listed as a system, and parts added to the top must be listed for that chimney. R1005.2 keeps unlisted decorative tops off factory-built chimneys, and the same logic applies to other add-ons.
Top dampers made for clay flue tiles are not fitted to listed metal chimneys. If the fireplace maker offers a listed damper accessory, we can price it; otherwise the estimate explains the options within the listing. Where the maker offers no listed option, the answer may simply be a tight-fitting listed cap and a well-kept firebox damper.
Fitting a damper to a round flue
A round flue, whether round clay tile or the top of a stainless liner, needs a damper made for a round opening or a round adapter from the damper's maker. The frame has to seat on the flue without blocking the liner's top plate or its termination.
On a relined chimney, we check the liner size and what its maker allows at the top before choosing a damper. The model and any adapter are named on the estimate. A stainless liner's top plate may also need to be sealed where the damper frame sits over it.
What we check before fitting a top damper in Orange Park
- Every flue identified, with the damper on a fireplace flue only
- Round flue or liner top matched with the maker's adapter
- Gasket, spring and cable condition noted on the ticket
- Walk-through on opening, closing and locking the lid
Before the damper is ordered
What happens to my old damper?
It is removed or fixed fully open so it cannot close across the flue. The ticket records which.
Will it need maintenance?
Very little. The gasket, spring and cable are checked when the chimney is swept, and the maker's parts replace them when they wear.
More services in Orange Park
-
-
-
-
-
-
Learn more about top-sealing damper installationAll services in Orange Park
Rusted throat damper in Orange Park?
Repair the old damper or seal the top? Our specialists in Orange Park price both when both make sense.
Free Inspection