Recessed electric fireplaces installed in Orange Park
Electric fireplaces hung, recessed or inserted in Orange Park homes by local family pros, after a free look at the wall and circuit.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Family-owned installation experts serving Orange Park
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Cords are routed out of sight and never onto extension cords or strips.
- Free inspection and estimateThe wall and circuit at your Orange Park home are checked against the unit's manual at no charge.
- 100% satisfaction guaranteedA unit left crooked, loose or not working to its manual gets a return visit and a fix at no cost.
- Family owned and operatedThe family crew that measures your wall is the one that mounts the unit, so nothing gets lost between visits.
An old gas line in the firebox
Fireplaces that once had gas often still have a gas pipe or valve key in the firebox wall. Before an electric insert goes in, that line has to be capped properly, and that is a job for a gas contractor. The firebox is cleaned only after the line is capped, never before.
We name that step on the estimate, with who does it, and schedule the insert after it is done. The cord route is then planned so it stays clear of the capped fitting. Old gas line in a fireplace you want to convert in Orange Park? Call (904) 920-5495, and our installers will look at it for free.
Orange Park lies inland. Orange Park lies on the St. Johns River.
Electric fireplace installs we do in Orange Park
- Recessed openings framed to the manual's rough size
- Heater run and cycle checked before we leave
- Wall and circuit checked at your Orange Park home for free
- A written install plan for your Orange Park room
How our installers fit an electric fireplace in Orange Park
-
Manual read in advance
Send the model number, and the installation section is read before we arrive.
-
Wall and circuit checked
Studs, wall contents, clearances and the circuit are checked against the manual.
-
Mounted, framed or inserted
The unit is hung, set into a framed recess or placed in a prepared firebox, with electrician work done in sequence.
-
Tested and handed over
Flame, heat, remote and cycling are tested with you, and the controls explained.
Flame-only evenings in Orange Park
Many units run the flame with the heater off, which suits evenings when heat is not wanted.
We set those controls up with you at every Orange Park handover.
10% off any service booked within 72 hours of inspection
Mounting, trim and the finish around the unit are all discounted.
Wall-mounted, recessed or insert
Electric fireplaces go in one of three ways. A wall-mounted unit hangs on a bracket on the finished wall. Recessed models slide into a framed hole in the wall, finishing flush or nearly so. An insert slides into an existing firebox that will no longer burn wood.
Each has its own manual, and the manual decides the details: the bracket and fasteners for a wall mount, the rough opening for a recess, the size range for an insert. We match the method to the room and the unit. The estimate names which one you are getting and what it involves, so there is no surprise on the day. Some rooms suit more than one method, and then the choice comes down to the look you want and the work you accept.
Wall finishes around a recessed unit
Set inside a finished wall, a recessed unit has a manual that often limits which finish materials may be used around it and how close they may come. Some units allow drywall right up to the trim. Others ask for space around certain parts.
We check the manual for your model and finish the opening accordingly, fitting the trim supplied with the unit. Where you plan tile or stone around the fireplace, we note the manual's limits so whoever does that work has them in writing. Our scope covers the opening and the trim, not the wider wall finish. If the wall is to be painted after the install, we leave the trim masked and ready.
Who does which part of the job
Two trades often share an electric fireplace install. We do the mounting, framing, flue closure, cord routing and trim. An electrician does new circuits, new outlets and hardwired connections under NFPA 70.
The estimate lists both parts and the order they happen in, so nobody waits on anyone else. We share the unit's manual and the planned position with the electrician, and we coordinate the dates. You deal with us for the whole job, with the electrician's work clearly named. If a permit or inspection applies to the electrical work, that sits with the electrician's part of the job.
What we check on the wall in Orange Park
- Model and rating label read: volts, watts and amps
- What else shares the circuit, checked against the unit's load
- Heater outlet clearances marked for shelves and screens
- Firebox cleaned and flue closed for an insert
Before the unit goes in
Can an electric insert go into my old wood fireplace?
Usually, if the opening falls within the insert's size range. We clean the firebox, shut the chimney off above it, set the insert and run the cord tidily.
How long does an installation take?
A wall mount can take a few hours. A framed recess or an insert with flue work takes longer, and any electrician work sets the pace. The estimate gives the expected time.
More services in Orange Park
-
-
-
-
-
-
Learn more about electric fireplace installationAll services in Orange Park
An electric fireplace set flush on your Orange Park wall
When the unit is on the wall in Orange Park, we run every function with you, under our satisfaction guarantee.
Free Inspection