Chimney crown repair in Orange Park by local masons
No thin skim over a cracked top. Local masons inspect Orange Park crowns free, then seal them properly or replace them properly.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Chimney crown pros who check before they seal or recast
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Every new crown we cast gets an overhang, a drip groove and a sealed joint at the flue.
- Free inspection and estimateWe map the cracks on your Orange Park crown and check the brick under it at no charge.
- Upfront pricing, no hidden feesCoating and recasting are both priced on paper, so you see the difference before choosing.
- 100% satisfaction guaranteedIf the finished crown is not right, tell us and we come back to put it right.
Where the crown meets the flue tile
The joint between the crown and the flue tile is where crown cracks tend to start. The tile heats and grows with every fire, and a crown cast hard against it gets pushed apart from the inside. The Florida Building Code calls for a caulked bond break there for exactly that reason.
Three checks come first on a crown repair in Orange Park: whether a bond break exists, whether the tile stands high enough above the crown, and whether the tile itself is cracked at the top. Casting fresh concrete around a broken tile wastes the concrete, so tile problems are named before the crown is priced. One phone call to (904) 920-5495 is all a free crown inspection in Orange Park takes.
Orange Park is on the St. Johns River. Orange Park lies within Clay County.
Crown repair jobs we handle in Orange Park
- Drip groove cast under the overhang
- Bond break sealed around each flue tile
- Chimney cap refastened once the new crown can hold it
- Roof and gutters cleared of crown debris at your Orange Park home
Map, prep, coat or pour, cure
-
Crack map from the roof
We identify the type of top and sketch each crack with its width, so the choice between coating and recasting is based on what is there.
-
Prep for coating or removal
A sound crown is cleaned and its wider cracks filled; a failed one is broken out down to sound brick.
-
Coat, or form and pour
The coating is brushed on in dry weather, or new concrete goes into forms with an overhang, a drip groove and reinforcement.
-
Cure, seal and refit the cap
The bond break at each flue is sealed, the concrete cures under cover, and the cap goes back on.
Thin mortar tops on chimneys in Orange Park
Some chimneys in Orange Park have a mortar wash troweled around the flue instead of a cast crown. It thins to almost nothing at the edge, and that edge is the first part to break away.
When we find one, the estimate proposes a cast crown with an overhang and explains why a new skim would fail the same way.
10% off any service booked within 72 hours of inspection
Tell us you want the discount when you call about the crown, and we note it on the booking.
Weather windows for a crown coating
A crown coating is only as good as the day it goes on. The coating maker's data sheet sets the rules: a surface and air temperature range, a clean and dry surface, and no rain due before the coating has had time to set, unless the crown can be protected.
That means crown coatings are scheduled for dry spells, and a day that looked fine can be called off if showers move in. We also cool a sun-heated crown with a light mist where the data sheet allows it, since a hot surface can make the coating skin over too fast.
Taking a failed crown down to sound masonry
Removing a crown is careful demolition on a roof. The old concrete or mortar is broken out in manageable pieces with hand tools or a small breaker, lowered in buckets or bags, and kept out of the flue with a cover over the tile.
The goal is to reach sound masonry: brick that is firm, mortar that is hard. Where the top courses are loose or soft, removal continues down through them, and they are relaid before the new crown is formed. How far down we expect to go, and how that changes if the brick is worse than it looks, is agreed before the first piece comes off.
Relaying the top courses before a new crown
The last few courses of brick under a crown take the most water when the crown fails, so they can be the loosest on the chimney. Brick that lifts by hand, joints that crumble, or faces that have flaked away mean those courses need relaying before a new crown goes on.
Relaying means taking the brick down, cleaning it or replacing damaged units, and laying it back level and plumb with fresh mortar. The new crown then sits on a firm, flat base. That work is listed separately from the crown, since it is a job in its own right.
Coat or recast, and the reasons
- Crown type found: mortar wash, cast-in-place or precast
- Crack map with widths, and whether the slab is still sound
- Reinforcement and concrete mix for a cast crown
- Cure time before the cap goes back and the fireplace is used
Crown repair questions from Orange Park
Will a new crown fix my leak?
It fixes a leak that is coming through the crown. If the water is entering at the flashing, the brick or the flue top, a new crown will not stop it, which is why we trace the entry point first.
Is there 10% off crown work?
There is. Crown coating or recasting booked within 72 hours of the free inspection comes 10% off; mention it when you book.
More services in Orange Park
-
-
-
-
-
-
Learn more about chimney crown repairAll services in Orange Park
Seal or recast your crown in Orange Park
Crown work waits for dry weather, so call (904) 920-5495 early and the job in Orange Park is set around the forecast.
Free Inspection