Local chimney repair in O'Neil

Safety items first, water second, wear last. That is how local pros rank chimney repairs in O'Neil after a free inspection.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Chimney repair experts for O'Neil homes

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Chimney repairs in O'Neil run from the top of the stack down, so finished work never sits under a leak.

Family owned and operatedThe family business that inspects your O'Neil chimney is the one that repairs it and answers for it.
No hidden feesEach repair line carries its own price, and nothing gets added once the work is under way.
Workmanship warrantyEvery finished repair line is covered by our workmanship warranty, and the estimate names those lines.

Call (904) 920-5495 Free Inspection

What we leave alone

Part of an honest estimate is saying what does not need doing. Weathered brick that is sound, mortar darker than the rest but still hard, a crown with a stain but no cracks: we note them and leave them.

The estimate also names what is not our work, such as roof covering beyond the flashing, gas supply lines, or wiring near the chimney. On O'Neil jobs, that keeps the estimate to repairs that fix something, and it gives you a baseline to compare against at the next yearly check. Each item we leave is still listed by name, so anyone reading the estimate later knows it was looked at and not missed. Something wrong with the chimney in O'Neil? Call (904) 920-5495 and describe it.

The county for O'Neil is Nassau County. O'Neil is near the coast without touching it.

Chimney repair work we take on in O'Neil

Rusted caps and chase covers replaced and fastened for wind
Rough smoke chamber steps parged smooth
Old tar, silicone and paint stripped before new work goes on
Each repair for your O'Neil home priced separately

Call (904) 920-5495 Free Inspection

From roof check to finished repair in O'Neil

Roof, attic and firebox checked
We look at the chimney from all three places in one visit and note each defect where we find it.
Cause traced before the fix
Stains, cracks and loose brick are followed back to the part that let water or heat through.
Repairs from the top down
Cap and crown come first, then brick and joints, then flashing, using the mortar and metal named on your estimate.
Cleanup and a final walk-around
Debris leaves with us, and we show you each finished repair plus anything worth watching.

Chimney repair just back from the beach

O'Neil lies near the coast. Salt can still settle on chimney metal, and galvanized parts lose their coating sooner than they would far inland.

So on O'Neil chimneys we treat caps, flashing and fasteners much as we would at the beach, and replacements are quoted in stainless steel.

10% off any service booked within 72 hours of inspection

Book in the three days after the inspection and the repair is 10% off.

Call (904) 920-5495 Free Inspection

How deep new mortar has to go

Repointing means raking out failed mortar and replacing it, and the depth matters more than the finish. A thin skim of new mortar over soft old mortar pops off within a few seasons, because it has nothing solid behind it.

Good practice rakes the joint back to sound mortar, deep enough that new mortar can be packed in firm layers, then tools it to match the profile of the joints around it. Mortar goes in while the brick is damp but not wet, and it is kept from drying too fast in sun or wind. Which joints get this treatment, and how deep each one is raked, is decided face by face.

Cutting out a single damaged brick

A brick that has lost its face can be replaced on its own when the bricks around it are sound. The mortar around it is cut out, the damaged unit broken out in pieces so its neighbors are not disturbed, and the cavity cleaned.

The new brick is buttered with mortar on its top, bottom and ends, slid in, and the joints packed and tooled. The hard part is the match: size, color and texture. A salvaged brick or a close modern match is chosen before the day, and you hear in advance how close the match is likely to be, so a lighter patch on an old face is not a surprise.

Checking the airspace between chimney and framing

The attic, and sometimes a closet, shows where the chimney passes the house framing. Under R1003.18, wood and other combustibles inside the house stay 2 inches clear of the masonry, so air can move between them and the brick cannot heat the framing directly.

Framing nailed tight to the brick, insulation stuffed into the gap, or stored boxes stacked against the chimney all close that space. Some of that is easy to fix on the spot, like pulling insulation back. Framing that was built too close is recorded with its location, because it matters most when the flue liner behind it is also damaged. Wiring stapled to the chimney face is noted for an electrician.

Each defect, its cause and its price

Heat and smoke items flagged first, with the fireplace status stated
Flashing metal and method for the roof covering on your house
Cap and screen sized to the flue, with the metal named
Liner or flue tile findings and the decision on fireplace use

Chimney repair questions from O'Neil

Do you work on factory-built chimneys as well as brick ones?

Yes. Factory-built chimneys have a metal pipe, a framed chase and a sheet-metal cover instead of brick and a crown, and the repairs follow the maker's listing. We tell you on the first visit which kind you have.

Will you work with my roofer?

Yes. Flashing and chimney work fit best into a re-roof schedule, and we can sequence our part with the roofer's. The estimate names which items belong to each trade.