A top sealing damper fitted to your chimney in Nocatee

A family-owned crew in Nocatee seals your chimney at the top and walks you through the handle before we leave.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Damper experts who measure before they order

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

The old throat damper is removed or fixed open so it can never drop shut.

Free inspection and estimateYour flue tile in Nocatee is measured and the crown checked on a free visit before any damper is ordered.
Upfront pricing, no hidden feesThe model, the handle position and any tile or crown work are priced in writing up front.
100% satisfaction guaranteedIf the lid does not seal or open the way we showed you, we return and adjust it.

Call (904) 920-5495 Free Inspection

Cooled air escaping up the chimney

An open or leaky flue is a vertical duct from the living room to the sky. When the house is air-conditioned, cooled air can rise out through it between fires, and the fireplace wall can feel warm or damp in hot weather. The effect is easy to miss because it happens quietly, every day the fireplace is not in use.

Closing the flue at the top with a gasketed lid stops that air movement for the whole chimney. We fit top dampers on fireplaces in Nocatee with the handle where you can reach it and show you how to use it. The inspection is free.

Nocatee is part of St. Johns County. Nocatee had 22,503 residents at the 2020 Census.

From the tile measurement to the handle

Handle brackets anchored where you can reach them
Owners shown how to open, close and lock the lid
Your Nocatee chimney's tile and crown checked first
Make and model of your Nocatee damper written down

Call (904) 920-5495 Free Inspection

The order of a top damper install

Tile measured on the roof
The flue tile's outside size, height and rim are checked on a free visit, with the crown around it.
Model ordered to fit
The damper is chosen from the maker's size chart for your tile and approved on the estimate first.
Frame set, cable run
The frame is set in the maker's adhesive, the old plate made safe and the cable run to the handle.
Adjusted and demonstrated
The lid is adjusted to seal, and you try the handle before we leave, with the cure time written down.

Spring and cable checks near the water in Nocatee

Salt in the air near the coast shortens the life of springs and cables that are not stainless. A lid that no longer lifts fully spoils the draft of the next fire.

We check those parts on every visit to a chimney in Nocatee and replace them with the maker's parts.

10% off any service booked within 72 hours of inspection

Leaky throat damper? A top damper ordered within three days of the inspection is 10% off.

Call (904) 920-5495 Free Inspection

How much tile must stand above the crown

The frame of a top damper needs a certain height of flue tile standing above the crown to seat and bond properly, and each maker states its minimum. A tile that stops flush with the crown, or only just above it, may not give the frame enough to grip.

When the tile is too short, the options depend on the model: an extension piece, a different mounting style or a crown adjustment. We check the height before ordering, so the damper is not bought for a tile it cannot fit. Measuring that height takes a tape and a minute on the roof, and it settles whether the model will seat at all.

Mounting the handle bracket

Inside the firebox, the handle bracket goes on a side wall near the front where the brick allows. It is anchored into firebrick or masonry with fasteners suited to it, at a height you can reach without leaning into the firebox.

The bracket also carries the lock that holds the lid shut. We place it where it will not sit in the flames and where the chain or handle is easy to see before lighting. You approve the spot before we drill. The bracket is set level and square to the opening, so the handle hangs straight and is plain to see.

Servicing an older top damper

Top dampers that have been in place for years may need a new gasket, a new spring, a cable or a lid. Makers support their models with replacement parts, and repairs like these are done from the roof and the firebox without removing the frame.

If the frame's bond to the tile has failed, or the model's parts are no longer made, a new damper may be the answer. We tell you which after checking it, and list the parts and prices. Availability is confirmed with the maker or its distributor before we quote, so the price does not rest on a part that cannot be had.

What we check before fitting a top damper in Nocatee

Frame set in the maker's adhesive, with the cure time written down
Round flue or liner top matched with the maker's adapter
Walk-through on opening, closing and locking the lid
Cap needs for other flues on the chimney listed separately

Before the damper is ordered

Can you fit a top damper the same day in Nocatee?

The measurement can happen the same day when the schedule has room, but the damper is ordered to fit your tile. We install it once it arrives, and the adhesive then needs its set time.

Can a top damper go on any chimney?

It needs a masonry fireplace flue with a sound tile standing high enough above the crown. Flues for other appliances and listed metal chimneys are handled differently, and we tell you which applies.