Local chimney crown repair for Nocatee homes
In Nocatee, a failed mortar wash comes off down to sound brick and a real cast crown goes on, once a free inspection confirms it.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Crown repair experts for Nocatee chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Thin mortar washes are replaced with a real cast crown instead of being skimmed over.
- Free inspection and estimateWe map the cracks on your Nocatee crown and check the brick under it at no charge.
- Upfront pricing, no hidden feesCoating and recasting are both priced on paper, so you see the difference before choosing.
- 100% satisfaction guaranteedIf the finished crown is not right, tell us and we come back to put it right.
Water in the firebox after rain
Water on the firebox floor or rust on the damper after rain can come from the crown. Water that gets through a crown crack drops into the core of the chimney, runs down inside the masonry and finds its way out at the smoke chamber or the damper.
When a house in Nocatee shows that symptom, the crown goes near the top of the list, along with the top of the flue. When the crown is the entry point, the repair goes there, and the damper and smoke chamber are checked for the damage the water has already done. We check the cap and flashing on the same free trip to your Nocatee crown; call (904) 920-5495.
At the 2020 Census, Nocatee was home to 22,503 people. Nocatee is near the coast without touching it.
Crown repair jobs we handle in Nocatee
- Cracks mapped and measured before any repair is chosen
- Loose top courses relaid before the new crown is cast
- Drip groove cast under the overhang
- Reinforcement placed inside the slab to control cracking
From crack map to cured crown in Nocatee
-
Crack map from the roof
We identify the type of top and sketch each crack with its width, so the choice between coating and recasting is based on what is there.
-
Prep for coating or removal
A sound crown is cleaned and its wider cracks filled; a failed one is broken out down to sound brick.
-
Coat, or form and pour
The coating is brushed on in dry weather, or new concrete goes into forms with an overhang, a drip groove and reinforcement.
-
Cure, seal and refit the cap
The bond break at each flue is sealed, the concrete cures under cover, and the cap goes back on.
Thin mortar tops near the water in Nocatee
Some chimneys in Nocatee have a thin mortar wash instead of a cast crown. Near the coast that wash takes wind-driven rain on its feathered edge, which is the first part to break away.
When we find a wash like that, the estimate proposes a cast crown with an overhang, and it explains why a new skim would fail the same way.
10% off any service booked within 72 hours of inspection
Seal or recast, crown repair in Nocatee earns the 10% discount.
Filling larger cracks before the coating
A brushed crown coating bridges fine cracks, but it is not meant to fill wide ones. The data sheets for these products say larger cracks and voids are filled first, with a fast-setting patching cement or a suitable caulk, and the coating goes over the top.
We clean out each open crack, fill it flush, and let the fill set before coating. Skipping that step leaves a thin film stretched over a gap, which splits the first time the crown moves. The filled cracks are marked on the crack map so they can be checked at the next yearly visit.
Giving a crown enough slope
Slope is what makes a crown shed water, which is why the residential code's crown section asks for it, and a flat top defeats that purpose. Water that sits on it soaks into the concrete, finds every hairline crack, and carries dirt and dissolved salts into the pores.
The slope runs from the flue tiles down to the outer edge on every side, steep enough that water moves off promptly without pooling at the tile. Where two or more flues share the crown, the surface between them slopes away as well, so no low spot is left to hold water. The slope is checked with a level before the concrete sets.
Crowns around more than one flue
When a chimney has two or more flues, the crown has to drain between them as well as off the outside edges. The space between flue tiles is a natural low point, and a flat area there will hold water against both tiles.
Each tile needs its own bond break and its own check for height and cracks. Where the tiles are close together, forming the crown between them takes care so the concrete fills fully without voids. A cap that covers several flues sits on the finished crown, and its fastening is planned before the pour. Each flue's findings are recorded separately.
Coat or recast, and the reasons
- Crack map with widths, and whether the slab is still sound
- Coating product class and the data sheet's weather window
- Chimney cap removal and reinstallation, with how it is fastened
- Cure time before the cap goes back and the fireplace is used
Crown repair questions from Nocatee
Does crown work mean the chimney cap comes off?
For a recast, yes. For a coating, it depends on how the cap is mounted. The estimate says which applies to your chimney.
Is there 10% off crown work?
There is. Crown coating or recasting booked within 72 hours of the free inspection comes 10% off; mention it when you book.
More services in Nocatee
-
-
-
-
-
-
Learn more about chimney crown repairAll services in Nocatee
Cracked crown, free check
Our crown pros map the cracks on your Nocatee chimney and write both options down. Call (904) 920-5495.
Free Inspection