Local fireplace repair in Nocatee
Loose brick, stuck damper, cracked panel? In Nocatee, a free inspection names the failed part before we touch it.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local fireplace experts for Nocatee homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Small repairs stay small, and a crack is not treated as a reason to rebuild.
- Locally ownedA locally owned business shows you the failing part of your Nocatee fireplace before any price.
- Upfront pricing, no hidden feesSafety repairs come first on the estimate, and items that can wait are priced on their own lines.
- 100% satisfaction guaranteedIf the fireplace still smokes or sticks after the repair we quoted for it, we come back.
Masonry or factory-built, settled at the start
Two fireplaces that look alike from across the room can be built in entirely different ways. One is brick and firebrick laid on site. The other is a steel box with molded panels, a rating plate and a chimney pipe tested with it. Which one sits in your Nocatee living room decides where the parts come from and which document the repair follows: the building code for masonry, the maker's listing for factory-built. We settle that in the first minutes of the visit and record it, so anyone who works on the fireplace later starts from the same page. Masonry or metal? Knowing which your Nocatee fireplace is helps, so say so on the call to (904) 920-5495.
The coast is close to Nocatee. Nocatee sits in St. Johns County.
Firebox, damper, hearth and trim
- Masonry or factory-built settled before any part is named
- Refractory panels ordered by the model on the rating plate
- Damper plate, pivot and handle worked and repaired
- Hearth extension measured against the opening
Identify, test, repair, test fire
-
Type and rating plate read
We settle whether the fireplace is masonry or factory-built and read the model where there is one.
-
Joints, damper and hearth checked
Joints are probed, the damper worked through its travel, and the hearth and trim measured.
-
Repair with the right materials
Refractory mortar and firebrick for masonry, the maker's parts for factory-built units.
-
Test fire and cleanup
Where smoke was the problem, a short test fire checks the fix, and the room is cleaned before we go.
Storm months and fireplaces in Nocatee
In the June to November storm season, storms near the coast can send rain down a flue. The firebox and damper take it first.
After a wet storm, a rusty streak in the firebox of your Nocatee fireplace is worth a look before the next fire.
10% off any service booked within 72 hours of inspection
Any fireplace repair you book in that window is discounted, first job or not.
Working out how far trim can stand out
Trim near a masonry opening follows a simple ratio in the code: nothing combustible within 6 inches, and within 12 inches, no more than 1/8 inch of projection for each inch away from the opening. A piece of wood 8 inches from the opening may stand out 1 inch.
At 6 inches it may stand out three-quarters of an inch. Past 12 inches the ratio no longer applies. We measure each piece of trim and molding on the face, including the underside of a mantel shelf, and anything over the limit is listed with the fix, whether trimming it, moving it or replacing it with noncombustible material.
A rough smoke chamber above the damper
Above the damper, the smoke chamber narrows from the width of the firebox to the size of the flue. The code calls for its walls to be parged smooth with refractory mortar and limits how steeply they can lean: 45 degrees from vertical for prefabricated linings or rolled walls, and 30 degrees for corbeled masonry. A chamber left as stepped, unparged brick catches smoke and slows it on the way up. When a smoke test points past the damper, we look at the chamber with a light from below, and parging it smooth is priced as smoke chamber repair, separate from the firebox work.
An outside air inlet that no longer opens
Factory-built fireplaces with an outside air kit have a duct from an exterior inlet to a small damper near the firebox. The outside end is screened, and the code calls for corrosion-resistant mesh with openings no larger than a quarter inch. Lint, leaves and insects can close the screen, and the inside damper can stick shut. Either way the fire goes back to feeding on room air, which is what the kit was installed to prevent. We open the control, check that air actually moves at the firebox end, and clean or replace the screen and damper parts from the maker's list.
Parts, materials and safety items on paper
- Cracked or loose firebrick cut out and replaced, counted brick by brick
- Refractory panels ordered by model number from the rating plate
- Damper plate, pivot and handle freed, adjusted or replaced
- Spark screen checked for gaps and replaced with the listed part
Fireplace repair questions from Nocatee
Will you tell me if the fireplace is unsafe to use?
Yes, in writing. Faults such as an open firebox joint, a panel broken through to the steel or a damper that will not open go at the top of the estimate with a note to leave the fireplace unused until they are fixed.
Can a smoking fireplace be fixed without rebuilding it?
It can, once the cause is known. A test fire separates a damper problem, a cold flue, a house short of air and an opening too big for the flue, and each has a fix far smaller than a rebuild.
More services in Nocatee
-
-
-
-
-
-
Learn more about fireplace repair and serviceAll services in Nocatee
Fix the firebox, damper or hearth in Nocatee
Tell us whether it is the damper, the firebox or the hearth when you call (904) 920-5495, and our fireplace experts bring the right materials to Nocatee.
Free Inspection