Local chimney repair in Nocatee

In Nocatee, a free inspection finds the failed part, and we fix it at the smallest scope that will hold.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Chimney repair experts for Nocatee homes

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

What we found on the roof and in the attic of your Nocatee home comes before any price.

Family owned and operatedThe family business that inspects your Nocatee chimney is the one that repairs it and answers for it.
No hidden feesEach repair line carries its own price, and nothing gets added once the work is under way.
Workmanship warrantyEvery finished repair line is covered by our workmanship warranty, and the estimate names those lines.

Call (904) 920-5495 Free Inspection

Why the attic is part of a repair visit

Up in the attic, a chimney shows its history. Stained rafters beside the stack record old leaks. Insulation packed against the brick, framing set tight to it, or missing fireblocking where the chimney passes a ceiling are things no one sees from the yard.

We go up with a light on every Nocatee visit where the attic can be reached safely. What we find there can change the repair list, and it is written down with the rest, with the location described well enough for you to find it yourself. If it is hot or cramped up there, we keep the visit short and say what we could not reach. Call (904) 920-5495 with your Nocatee address, and we will find the part that failed.

Nocatee sits in St. Johns County. The 2020 Census counted 22,503 residents in Nocatee.

Repairs from the cap down to the firebox

Hairline crown cracks sealed, or a failed crown recast
Spalled brick cut out and replaced one unit at a time
Rough smoke chamber steps parged smooth
Repairs on your Nocatee chimney done from the top down

Call (904) 920-5495 Free Inspection

Find it, rank it, fix it, show you

Roof, attic and firebox checked
We look at the chimney from all three places in one visit and note each defect where we find it.
Cause traced before the fix
Stains, cracks and loose brick are followed back to the part that let water or heat through.
Repairs from the top down
Cap and crown come first, then brick and joints, then flashing, using the mortar and metal named on your estimate.
Cleanup and a final walk-around
Debris leaves with us, and we show you each finished repair plus anything worth watching.

Cap, crown and flashing as one set in Nocatee

Near the water, the parts at the top of a chimney wear side by side. When one of them lets water into a chimney in Nocatee, the other two deserve a look the same day.

So our repair visits check the cap, the crown and the flashing as a set, and you hear which one is leaking now and which only needs watching.

10% off any service booked within 72 hours of inspection

Chimney repair in Nocatee gets the discount whatever the failed part turns out to be.

Call (904) 920-5495 Free Inspection

Cutting out a single damaged brick

A brick that has lost its face can be replaced on its own when the bricks around it are sound. The mortar around it is cut out, the damaged unit broken out in pieces so its neighbors are not disturbed, and the cavity cleaned.

The new brick is buttered with mortar on its top, bottom and ends, slid in, and the joints packed and tooled. The hard part is the match: size, color and texture. A salvaged brick or a close modern match is chosen before the day, and you hear in advance how close the match is likely to be, so a lighter patch on an old face is not a surprise.

When an addition leaves the chimney too short

Chimney height is not settled once and forgotten. Section R1003.9 of the residential code measures the top of the stack against its surroundings: it has to clear anything built within 10 feet of it by 2 feet or more, and rise 3 feet or more above its own roof penetration.

A second story, a raised roof or a new dormer built near an existing chimney can leave it short of that line, and the result is weak draft and smoke in the room when wind crosses the new roof. The fix for a short chimney is a design question: what it would take, and which trade would carry it out.

Metal chimney parts close to salt water

Near the coast, salt carried on the wind settles on every metal part of a chimney and holds moisture against it. Galvanized caps, chase covers, fasteners and flashing lose their zinc coating faster under that film and start to rust sooner than the same parts further inland.

On chimneys in this band we look closely at cap mesh, cover seams and screw heads, and we specify stainless steel or copper parts with fasteners of a compatible metal, following each maker's guidance on exposure. The Brick Industry Association does not recommend galvanized steel for chimney flashing in any case, and near salt water the reasons add up faster.

Each defect, its cause and its price

Heat and smoke items flagged first, with the fireplace status stated
Flashing metal and method for the roof covering on your house
Permit needs, where the building department requires one for a line
Temporary measures marked as temporary, with what later replaces them

Chimney repair questions from Nocatee

Can you repair just one part of my chimney?

Yes, when one part is what failed. The estimate lists each finding separately, so you can approve the crown and leave the repointing, or the other way round. If two items have to be done together to work, we say so.

Should I be there for the first repair visit?

For the first visit, yes, at least long enough to walk us through what you have noticed and to open the house for the attic and the fireplace. Outside-only repair days can go ahead without you once the estimate is signed.