Local chimney waterproofing for Neptune Beach homes
No paint and no glossy film. Local pros treat Neptune Beach brick with a repellent that soaks in and lets moisture out, after a free check.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Chimney waterproofing specialists who test before spraying
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Glass, skylights and roofing near your Neptune Beach chimney are covered before a drop is sprayed.
- Free inspection and estimateWe splash test your Neptune Beach chimney at no charge and tell you if the brick needs treatment at all.
- No hidden feesRepairs and repellent are separate lines, and nothing is added once the spraying starts.
- 100% satisfaction guaranteedIf treated brick still soaks up water where we sprayed, we come back and put it right.
Treating the brick after tuckpointing
Mortar placed in a joint is still curing for days, and a repellent sprayed over it too soon can interfere. BIA's guidance and the maker of our product both set a 72-hour minimum after repointing, and newly built masonry waits a good deal longer. When your Neptune Beach chimney has just had its joints renewed, the treatment is booked as a second visit rather than done the same afternoon. The wait has another use: the repaired chimney goes through some weather first, and that shows whether the repairs alone have stopped the water before anyone decides treatment is needed. The brick and water check in Neptune Beach costs nothing; phone (904) 920-5495 to set a day.
Neptune Beach lies on the coastline. The county for Neptune Beach is Duval County.
Waterproofing work we do in Neptune Beach
- Open joints and cracked brick repaired before treatment
- Cure time after repointing taken from the data sheet
- Windows, skylights and shingles covered before spraying
- Treatment day at your Neptune Beach home set for dry weather
Splash, repair, patch test, flood
-
Splash test every face
Water on each face shows where the brick soaks it up, and the crown, cap and flashing are checked for openings.
-
Openings closed and cured
Joints, brick, crown and flashing are repaired first, and the cure time on the data sheet runs its course.
-
Clean, patch test, then flood
The brick is cleaned, a test patch dries beside untreated brick, then the repellent goes on from the bottom up.
-
Dry and retest
Once it has cured, we splash the faces again so you can see the water bead off.
Timing treatment around coastal weather in Neptune Beach
A penetrating repellent needs visibly dry brick and a stretch without rain while it soaks in. Near the ocean in Neptune Beach, we watch the forecast and the brick itself before we set the day.
If rain arrives early, the work stops and picks up once the brick is dry again.
10% off any service booked within 72 hours of inspection
Brick staying dark after rain? Book during the 72 hours after the inspection and 10% comes off.
Visibly dry brick and a rain-free window
For a penetrating product to soak in, the pores need to have room for it. The maker's directions call for clean, structurally sound masonry that is visibly dry, and they rule out wet or saturated surfaces. They also ask for a six-hour window with no rain expected, unless the treated wall can be sheeted with plastic. After a run of wet days, brick can look dry at the face while still holding water further in, so on the day we check the brick itself, pressing and looking at freshly scraped mortar, rather than relying on the forecast and the look of the surface alone.
Painted or glazed brick is left out
The maker's directions for the repellent we apply exclude painted brick and glazed brick or tile. Paint already forms a film on the face, and a glazed unit has a fired, glass-like surface that the product cannot enter. Spraying either one wastes material and can leave a haze. Painted or glazed sections of a chimney are therefore masked off and left untreated. If paint on the chimney is blistering, peeling or taking the brick face with it, that points to moisture trapped behind it, and what to do about the paint is set out as a separate decision.
Holding off while salts are still coming out
White efflorescence is a sign that water is still travelling through the masonry and depositing salt where it dries. BIA's position is that brickwork with a history of it should be coated only after the moisture source has been corrected, because salts that cannot reach the surface may crystallize just behind it and break the face. So the steps run in order: the deposit is brushed off dry, the water path is found and repaired, and the wall is watched for fresh deposits before any treatment is booked. If the white returns, the repair is not finished, and treatment waits.
Repairs and treatment, priced apart
- Faces treated, and surfaces left out such as the crown top
- Application method and coverage rate from the maker's sheet
- When to recheck the treatment, and how to tell it has worn
- Stucco or stone areas, and the product listing that covers them
Waterproofing questions from Neptune Beach
Can the treatment be done the same day as repointing?
No. Fresh joints need at least 72 hours to cure first, according to BIA and the product's data sheet, so treatment is a second visit.
What if my chimney does not need treatment?
Then we tell you. If the brick sheds water and the joints, crown and flashing are sound, treatment is left off the estimate.
More services in Neptune Beach
-
-
-
-
-
-
Learn more about chimney waterproofingAll services in Neptune Beach
Keep rain out of your Neptune Beach chimney
Cracks and open joints are repaired before any repellent, and both are priced as separate lines for your chimney in Neptune Beach.
Free Inspection