Local chimney flue repair in Mandarin
Clay flue tile repair for Mandarin chimneys, done by family pros who stand behind the work with a workmanship warranty.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local flue pros for Mandarin chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Local and family owned, we come back to the same Mandarin chimney if a repair slips.
- Free inspection and estimateThe flue at your Mandarin home is swept, examined from both ends and mapped at no charge.
- 100% satisfaction guaranteedIf the repaired flue is not sound and correctly sized when we finish, we make it right.
- Family owned and operatedA family business maps the flue and does the repair, so the plan and the work stay in one set of hands.
Where the liner meets the smoke chamber
In a fireplace chimney, the clay lining is meant to start at the top of the smoke chamber. That joint, between the sloped chamber walls and the first tile, is a common place for gaps, because the transition is awkward to build.
A gap there lets hot gas reach the masonry at the bottom of the flue. We look at it from the firebox with a light and mirrors, and a repair to the first tile is priced separately from any smoke chamber work. Gap at the bottom of your Mandarin flue? Call (904) 920-5495, and our flue team will check it free.
Mandarin is a neighborhood inside Jacksonville city limits. The county for Mandarin is Duval County.
What a flue repair covers in Mandarin
- Cracked top tiles cut out and replaced from the roof
- Seal around the top tile remade
- Loose mortar ridges knocked back inside the flue
- Relining quoted plainly when repair will not hold
From the first look to a sealed flue in Mandarin
-
Swept and examined
The flue is cleaned, then looked over from the roof and the firebox with a light and mirrors.
-
Mapped and measured
Each defect is placed by height and wall, and the flue size is checked against what it serves.
-
Repaired by the chosen method
Top tiles swapped from the roof, damaged sections coated with a listed system, or a relining price when repair will not hold.
-
Checked and cured
The finished flue is examined from both ends and left to cure before the first fire.
Flues that were built with open joints in Mandarin
Some flue gaps come from how the tiles were laid, with little mortar between them. That is a construction question, not a location one.
We find those joints in Mandarin flues after sweeping and price the resurfacing or relining that closes them.
10% off any service booked within 72 hours of inspection
Cracked flue tiles? The repair you book any time in the 72 hours after your inspection is 10% off.
Why the code asks for a lined chimney
Section R1003.11 of the Florida residential code requires a lining in every masonry chimney, of a type that suits whatever appliance is connected, as its listing and maker direct. The liner is a separate duct inside the chimney walls, and its job is to carry smoke, gases and condensate up and out without letting them into the brick.
Repair work restores that duct. Whatever method is used, the result has to be a continuous, sealed passage from the bottom of the lining to the top. A repair that closes one crack but leaves an open joint below it has not done the job, which is why the whole flue is examined before any single fix is priced.
Cleanouts and the bottom of the flue
Under R1003.17, a masonry chimney venting an appliance gets a cleanout near the bottom of each flue: no more than 6 inches up from the base, at least 6 inches tall, closed by a noncombustible cover, with its top edge 6 inches or more under the lowest inlet. Flues serving fireplaces can be cleaned through the fireplace instead.
The cleanout is also a window into the bottom of the flue. Debris piled there, broken tile among it, tells us damage has fallen from above. A rusted door that no longer closes lets air in, which affects draft. Both are small items, and we list them on the flue estimate rather than leaving them for later.
Repairing a flue that serves a gas appliance
Flue linings for gas appliances fall under the code's fuel gas chapter, and gas appliance makers set their own venting rules. A clay flue that once served a fireplace is not automatically suited to a furnace or water heater.
When a flue serves a gas appliance, we read the appliance's rating plate and instructions before choosing a repair. Some appliances need a liner of a particular type and size, and a clay flue repaired to suit a fireplace can still be wrong for them. The appliance itself, including its connection and gas supply, stays with the gas contractor, and the estimate names who does what.
Flue findings written down before pricing
- Sweeping needed before the flue can be judged, listed on its own
- Gaps at the smoke chamber and at the top end of the lining
- Inlet thimble and cleanout door condition on appliance flues
- Relining priced when repair cannot give a sound, sized flue
Flue repair questions from Mandarin
Do you repair chimney flues in Mandarin?
Yes. We repair clay flues across Duval County, Mandarin included, from single top tiles to full-height resurfacing. If a sweep left a note, have it ready when you call.
Does resurfacing make the flue smaller?
A little, because the coat adds thickness to every wall. We measure the flue and the fireplace opening first, and resurfacing is only offered when the flue will still meet the size the code asks for.
More services in Mandarin
-
-
-
-
-
-
Learn more about chimney flue repairAll services in Mandarin
Have the flue checked while the fireplace is cold
Our flue pros sweep, map and price every defect in your Mandarin flue. Call (904) 920-5495.
Free Inspection