Family-run gas fireplace insert installation in Mandarin

Family-owned gas insert specialists check whether your Mandarin fireplace can take an insert, at no charge.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Gas insert experts for Mandarin homes

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Old wood chimneys are cleaned before any gas appliance connects, as the fuel gas code asks.

Free inspection and estimateThe opening, flue and mantel of your Mandarin fireplace are measured against the insert's plate at no charge.
Upfront pricing, no hidden feesInsert, vent kit, surround, cleaning and repairs are priced line by line, and the gas and power trades are named.
100% satisfaction guaranteedIf the insert does not light, burn or seal the way its manual describes after our installation, we come back.

Call (904) 920-5495 Free Inspection

A chimney too short or too tall

Chimney height matters to a gas insert as much as to a wood fire. Venting kits come with a shortest and a tallest run they allow, plus limits on how far the pipes may jog sideways on the way up. Offsets at a shallow angle are the usual trouble spot.

Chimneys outside those limits need a different vent plan or a different model, and yours is measured from the insert position to the top before anything is recommended. Wondering whether your Mandarin chimney suits a gas insert? Get it measured at (904) 920-5495.

Mandarin lies within Duval County. Mandarin is inland.

Liners, surround, gas and power

Fireplace openings measured against the insert's plate
Dampers removed or fixed open for the liners
Gas and power hookups assigned to their trades
Pressure readings taken at the valve

Call (904) 920-5495 Free Inspection

Measure, clean, reline, light

Measure against the plate
Opening, flue and mantel are checked against the insert's rating plate and manual.
Clean and check the chimney
The old flue is cleaned, examined and repaired if needed before the liners go up.
Liners, insert, surround
The vent kit runs to its termination, the insert is set and the surround fitted.
Hookups and first light
The gas and electrical hookups are made, then we light and test the insert with you.

Power outages and gas inserts in Mandarin

When a storm cuts power in Mandarin, some gas inserts keep lighting on batteries and some do not.

We check the model's behavior before you buy.

10% off any service booked within 72 hours of inspection

Measured in Mandarin? Book the gas insert inside three days and 10% comes off.

Call (904) 920-5495 Free Inspection

When the chimney is not sound

The fuel gas code does not let a gas appliance use a chimney that is unsafe. Where a chimney is found unsafe, section 503.5.6 calls for it to be repaired, rebuilt, lined, relined or replaced with a vent or chimney that conforms to NFPA 211.

A direct-vent insert runs its own liners, but those liners still depend on the chimney around them for support and protection. A chimney that is cracked through or leaning is repaired before the insert goes in, and the repair is priced as its own line on the estimate. A chimney in good shape needs none of this, and the estimate says so plainly.

The old damper and the liner route

The fireplace throat, where the damper plate sits, is the gateway for the liners. The plate is taken out or pinned wide open so the liners pass freely, and on some fireplaces part of the damper frame has to be trimmed to give them room.

Removing or fixing the damper is part of the install, done after the chimney is cleaned and before the liners go up. We write down what was done to the damper on the ticket, since anyone who later pulls the insert out needs to know the fireplace was altered before lighting a wood fire in it.

What happens in a power cut

Outages affect gas inserts in different ways. One maker's system lets batteries in the receiver control the flame height and turn the insert on and off during an outage, while the blower and night light stay off until power returns.

Other models with standing pilots can light without house power at all, and some cannot run without it. If heat during an outage is part of why you want an insert, we check how the model behaves before you buy it, and show you where any backup batteries go on install day. Spare batteries kept in a drawer near the fireplace save a cold evening.

Opening, flue and mantel on paper

Fireplace opening width, height and depth against the insert's plate
Chimney examined and cleaned before any gas appliance connects
Damper removed or fixed open, and any trimming noted
Model, vent kit and liner sizes recorded on the ticket

Gas insert questions from Mandarin

Can I keep my mantel?

Yes, when its height suits its depth under the insert's figures. Otherwise the choice is another model, a higher mantel or a noncombustible one, settled before ordering.

Is the gas insert inspection free?

Yes. Measuring the opening, flue and mantel and writing the estimate are free, and the price you see is the price you pay. The installation comes 10% off when you book it in the three days after that visit.