Vent-free fireplace service for Lakeside homes
Water on the windows when the unit runs in Lakeside? We compare the unit's size with the room and the manual.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local vent-free fireplace pros in Lakeside
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Soot is traced to its cause before the walls are cleaned.
- Free inspection and estimateThe rating plate, the room and the flame of your unit in Lakeside are checked on a free visit.
- Upfront pricing, no hidden feesCleaning, listed parts and labor are priced in writing before anything is ordered or fitted.
- 100% satisfaction guaranteedIf the unit does not run the way we said after our service, we come back and put it right.
A noisy fan on a vent-free fireplace
Some vent-free fireplaces carry a fan that moves warm air into the room. Dust on the wheel, dry bearings or a loose mount make it rattle or whine, and a failed heat switch can leave it running or never starting. A fan that runs constantly can also mean its switch has failed closed.
We clean the fan on your unit in Lakeside, check the switch and fit the maker's kit parts where they are worn. If the fan needs a new outlet, an electrician runs it, and the estimate names that separately.
Lakeside sits in Clay County. At the 2020 Census, Lakeside was home to 31,275 people.
From the sensor pilot to the room size
- Oxygen depletion sensor pilots cleaned
- Burner ports and air inlets cleared
- Cracked or missing logs replaced with the maker's logs
- Mantel clearances measured against the manual
From the rating plate to a clean flame in Lakeside
-
Rating plate and gas confirmed
The model, gas, listing and input are read and the gas confirmed at the valve before parts are ordered.
-
Room measured against the code
The room volume and every unvented input in it are compared with the code and the manual.
-
Pilot, burner and logs serviced
The sensor pilot and burner are cleaned, the logs set to the diagram and worn parts replaced.
-
Leak checked and run through a cycle
Opened joints are leak checked, the flame is watched through a full cycle and findings are written down.
Storm season and gas shutoffs in Lakeside
Hurricane season, which the National Hurricane Center runs from June 1 to November 30, can bring a gas shutoff to inland homes too. Afterward, the pilot of a vent-free unit in Lakeside has to be relit by the manual's steps.
If it will not hold, we clear the sensor and check the supply at the valve.
10% off any service booked within 72 hours of inspection
Vent-free work booked before 72 hours have passed since the inspection comes 10% off.
Bedrooms and bathrooms
Section 303.3 of the fuel gas code keeps unvented appliances out of sleeping rooms and bathrooms. Its exceptions cover only a single wall-hung heater with an oxygen depletion safety system, capped at 10,000 Btu per hour for sleeping rooms and 6,000 for bathrooms.
Fireplaces and log sets do not fit those exceptions. Where we find one in a bedroom, we write down what the code says and the options, including a vented unit, and leave the choice with you. A unit that met an older rule may still be sitting in a bedroom, and we point that out when we find it.
Reading the pilot flame
The pilot flame on a vent-free set has a specific shape. One manual describes a correct natural gas pilot as blue with a slight curve, wrapping the thermocouple tip, with no yellow or orange. A lazy, yellow or lifting pilot is a sign of dirt, low gas or a worn assembly.
We compare the flame with the manual's drawing for your model after cleaning. What we saw before and after goes on the ticket, which makes the next visit quicker. The main burner flame is checked the same way, against the manual's description for the model.
Mantel clearances above a vent-free unit
Heat and combustion products from a vent-free unit rise straight up the wall, so the manuals set how high a mantel or shelf must be for its depth. A mantel inside that zone gets hot, darkens and can discolor the wall above it.
We take the mantel's height and depth and compare them with the chart for your model. If the mantel is too close, the options are written down, and any carpentry is named for whoever does it. Decorations placed on a mantel above the unit count as well, since they sit in the same rising heat.
Plate, room, pilot and logs, in writing
- Model, gas type, listing and input read from the rating plate
- Inlet and manifold pressure measured against the rating plate
- Mantel height and depth checked against the clearance chart
- Carbon monoxide alarm presence noted on the ticket
Vent-free fireplace questions from Lakeside
Why does my vent-free fireplace keep shutting off?
The oxygen depletion sensor may be tripping on lint or dust at the pilot, or the room may not hold enough air for the unit's input. We clean the pilot, measure the room and find out which it is.
What does your satisfaction guarantee cover on vent-free service in Lakeside?
The service and parts we quote. If the unit does not run the way we said it would after our work, we come back and put it right.
More services in Lakeside
-
-
-
-
-
-
Learn more about ventless gas fireplace serviceAll services in Lakeside
A free vent-free fireplace check in Lakeside
Read us the model on the rating plate when you call (904) 920-5495, and the right pilot parts come to the free visit in Lakeside.
Free Inspection