Family-owned hearth repair for Kings Ferry fireplaces

From one cracked tile to a new slab, a family-owned crew handles hearth work in Kings Ferry and backs it with our guarantee.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local hearth repair pros for Kings Ferry homes

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Floor and trim distances around the hearth are measured and written down.

Free inspection and estimateYour hearth in Kings Ferry is sounded, leveled and measured on a free visit before any price is written.
100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.

Call (904) 920-5495 Free Inspection

Grout that crumbles while the tile holds

Cracked or missing grout on a hearth whose tiles are all solid is a finish repair. The joints get raked out and regrouted with a product suited to the heat near the opening and to the joint width. That is a smaller job than resetting tile, and the estimate should say so.

We sound every tile on your hearth in Kings Ferry before calling it a grout job, because loose tile under new grout cracks the new grout. Local, family owned, and priced in writing before we start. Call (904) 920-5495.

Kings Ferry is in Nassau County. Kings Ferry is an inland community.

From loose tile to a new slab

Cracked hearth tile cut out and replaced
Undersized extensions enlarged to the code size
Raised hearth caps reset on a sound base
Your hearth in Kings Ferry measured and sketched before work

Call (904) 920-5495 Free Inspection

The order of a hearth repair

Describe the hearth on the call
Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.
Sounding and measuring
Each tile is tapped, the slab's level is read and the extension is measured against the opening.
Support first, surface second
A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.
Cured before heat, then handed back
The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.

Storm season and the hearth in Kings Ferry

The Atlantic hurricane season runs June 1 through November 30, by the National Hurricane Center's calendar, and high wind can move a cap wherever the chimney stands. In Kings Ferry, a cap lost in a storm turns the next rain into water on the hearth.

After a storm, a hearth with fresh staining gets its flue top checked before the tile work is priced.

10% off any service booked within 72 hours of inspection

Resetting tiles or extending the hearth, either job comes 10% off.

Call (904) 920-5495 Free Inspection

What holds the extension up

An extension has to rest on noncombustible support. Depending on how the house was built, that can be the fireplace foundation carried forward, a slab on the ground, or a masonry or concrete support reaching out over a framed floor. Each fails in its own way: a slab on grade can settle, and support over framing depends on the framing staying put.

Before we price a rebuild, we find out which support your hearth has, from below where a crawlspace allows or by opening the edge. The support type decides whether the new extension can sit on what is there or needs a base of its own.

Room for movement at the hearth's edges

Where a tiled hearth meets a wall, a raised platform or the firebox, a rigid grout joint has no room to move. Heating, cooling and settling push on that edge, and the tile or grout there cracks first. The movement joint guidance in the TCNA Handbook calls for soft joints where tile meets other materials and changes plane.

At a hearth the soft joint has to handle heat as well, so its filler is chosen for the temperature at that spot, and a joint beside the firebox stays noncombustible. We mark where the movement joints go on the sketch, so the next person does not grout over them.

The measurements taken above the hearth

While we are at the hearth, the woodwork above it gets checked too. No combustible trim is allowed closer than 6 inches to the opening. Between 6 and 12 inches, the allowed projection grows by 1/8 inch for every inch of distance, so trim 8 inches out may stand 1 inch proud.

Trim that breaks those limits is not a hearth repair, but it is a fire risk sitting right over one, so we note it. The estimate lists it as a separate item, with the person who handles the carpentry named, and you decide when to deal with it.

What we check on a hearth in Kings Ferry before pricing

Cracked tile or stone replaced, with the matching source named
Extension enlarged to code size, with support and joint detail shown
Water source above the hearth named and priced as its own line
Hearth pad on a factory-built unit checked against its manual

Before your hearth is lifted

Is a same-day hearth visit possible in Kings Ferry?

Same-day visits happen when a slot is open that day. Describe the hearth on the call and we give you the earliest time we have.

Do you work on hearths for factory-built fireplaces?

Yes. We follow the unit's listing and manual for the pad size and material, and use listed products where the maker calls for them. Have the model number ready when you call if you can find it.