Electric fireplace installation for Kings Ferry homes

Local installers in Kings Ferry who frame the opening, route the cord cleanly and list any electrician work up front.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Family-owned installation experts serving Kings Ferry

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Every function is tested with you watching before we call the job finished.

Free inspection and estimateThe wall and circuit at your Kings Ferry home are checked against the unit's manual at no charge.
100% satisfaction guaranteedA unit left crooked, loose or not working to its manual gets a return visit and a fix at no cost.
Family owned and operatedThe family crew that measures your wall is the one that mounts the unit, so nothing gets lost between visits.

Call (904) 920-5495 Free Inspection

A second opinion on a quote

Electric fireplace installs are sometimes quoted as quick jobs, then grow once the wall is open or the circuit is checked. A second look before you commit can show what a first quote left out. Where our list is longer, each extra line has a reason written next to it.

We look at the wall, the circuit and the model's manual, then list every step and the electrician work separately. You can compare our list with the quote you already have. Holding a quote for an electric fireplace install in Kings Ferry? Phone (904) 920-5495 and ask our installers for a free second look.

Kings Ferry is in Nassau County. The coastline lies beyond Kings Ferry.

Mount, frame, insert, test

Recessed openings framed to the manual's rough size
Rating label checked against the circuit
Heater outlet clearances marked on the wall
Old units removed and hauled away

Call (904) 920-5495 Free Inspection

How our installers fit an electric fireplace in Kings Ferry

Manual read in advance
Send the model number, and the installation section is read before we arrive.
Wall and circuit checked
Studs, wall contents, clearances and the circuit are checked against the manual.
Mounted, framed or inserted
The unit is hung, set into a framed recess or placed in a prepared firebox, with electrician work done in sequence.
Tested and handed over
Flame, heat, remote and cycling are tested with you, and the controls explained.

Closing the flue above an insert in Kings Ferry

An idle chimney above an electric insert lets conditioned air out and drafts in unless the flue is closed.

In Kings Ferry we seal the damper or fit a top seal and note which method was used.

10% off any service booked within 72 hours of inspection

Mounting, trim and the finish around the unit are all discounted.

Call (904) 920-5495 Free Inspection

An old gas line capped first

Some fireplaces being converted to electric once had gas, and a pipe or valve key may still be in the firebox or the wall beside it. That line is capped by a gas contractor before any electric insert goes in.

We do not touch the gas line. The estimate names the capping as a separate step, with who does it, and the insert is scheduled after it. The cord route is then planned so it stays clear of the capped fitting, and the capped line is noted on the paperwork for anyone who works on the fireplace later. Where there is doubt about whether a line is live, the gas contractor confirms it before we start.

Shelves and mantels over the heater

A shelf or mantel above an electric fireplace is a common wish, and the manual sets how far above the heater outlet it must sit and how far it may project. Warm air rising from the outlet is the reason.

We mark the minimum height on the wall during the install, so anyone adding a shelf later knows where it may go. Building mantels is not part of our installation work. What we make sure of is that the fireplace is placed so a shelf can be added within the manual's limits if you want one. The height is marked lightly so it can be painted over once you have made your plans.

Factory-built fireboxes as a host

Metal wood-burning fireplaces from a factory are listed units, each with its own panels, damper and chimney pipe. An electric insert can often sit in its opening, as long as the insert's manual allows the size and the factory-built unit is left intact.

We do not cut, drill or remove parts of the listed fireplace to make an insert fit. The flue is closed at the damper or with a top seal, the panels are checked for loose pieces and the insert is set with its trim. If the opening is outside the insert's range, you hear that first. The factory-built unit's rating plate is left visible, since anyone working on it later needs the model.

What we check on the wall in Kings Ferry

Installation method: wall mount, framed recess or firebox insert
Inside of the wall checked before a recess is cut
Firebox cleaned and flue closed for an insert
Old gas line capped by a gas contractor, named in writing

Before the unit goes in

Do you install electric fireplaces in Kings Ferry?

Yes. We install wall-mounted, recessed and insert electric fireplaces across Nassau County, Kings Ferry included. Give us the model number on the phone, and the manual gets read ahead of the visit.

Can the fireplace go on the same wall as my television?

Often, within the clearances the manual gives for objects near the heater outlet. We check which way your model blows its heat and lay out the wall so both fit.