Local fireplace installation in Hilliard

Your Hilliard fireplace installed with each part named, each clearance measured and each other trade planned on a free visit.

Family owned and operated
Free inspection and estimate
Same-day service available
Upfront pricing, no hidden fees

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

or call (904) 920-5495

Why Choose Us

Local fireplace experts for new installs in Hilliard

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off when you book today

Other trades, such as a roofer or an electrician, are listed up front so nobody is guessing.

Family owned and operatedOne family business owns your Hilliard fireplace plan, from the framing or footing to the top of the chimney.
Free written estimatesUnit, chimney, framing, hearth, permit and any other trade sit on one free written estimate.
Workmanship warrantyOur installation work is covered by our workmanship warranty, and the unit carries its maker's terms.

Call (904) 920-5495 Free Inspection

Replacing a metal fireplace that has worn out

When the firebox of a factory-built fireplace has warped or rusted through, the repair is a new fireplace. The plan for that job in Hilliard starts with two measurements and one document. The measurements are the framed opening and the chimney pipe diameter. The document is the new unit's manual, which says whether the existing pipe can stay. If it cannot, the chimney is replaced with the system the new unit lists, and the pipe, the firestops and the top parts are priced as separate lines that show where the cost sits. We look at the room, the attic and the roof of your Hilliard home on one free visit; call (904) 920-5495.

Hilliard falls within Nassau County. The 2020 Census count for Hilliard was 2,967 people.

What's Included

Fireplace installation work we take on in Hilliard

Chimney route walked from hearth to roof
Listed firestops at each ceiling and floor
Hearth extension laid to the listing or the code
Old worn-out unit removed and hauled away

Call (904) 920-5495 Free Inspection

How It Works

How fireplace installation runs

Route walked, hearth to roof
The room, the attic and the roof are checked for a clear chimney path before any unit is chosen.
Unit and chimney system chosen
A listed factory-built system from one maker, or a masonry fireplace on its own footing.
Framed, built and inspected
Framing and clearances follow the manual or the code, and the inspector sees them before the walls close.
Hearth, air supply and handover
The hearth extension and outside air go in, and we explain how to run the break-in fires.

Local Conditions

Replacing a worn-out metal fireplace in Hilliard

Factory-built fireplaces wear out: the steel box warps, the panels crack, and parts for older models run out.

For a replacement in Hilliard, the old unit comes out, and the chimney stays only if the new unit's manual lists it.

10% off your first service when you book today

Fireplace installation in Hilliard, booked today, comes with 10% off your first service.

Call (904) 920-5495 Free Inspection

What zero-clearance really allows

Zero-clearance describes where framing may touch a factory-built unit. It does not promise that nothing around it gets hot. The unit has standoffs, spacers built onto its top and sides, and the listing allows framing to rest against them. Everything else keeps the space the manual shows, including the air gap above the unit and around the chimney pipe. Packing insulation into those gaps, or framing tight against the chimney where the manual calls for space, defeats the test the unit passed.

We frame to the standoffs and leave the listed air spaces open. The inspector checks those gaps before the drywall goes on.

How tall the chimney stands above the roof

A chimney has to end high enough to draft and to keep sparks away from the roof. For masonry, the code sets two minimums: 3 feet above the spot where the chimney comes through the roof, and 2 feet above anything on the building within a 10-foot radius.

Chimney height on a factory-built system follows what its manual sets. Roof slope, a nearby ridge or a taller wing of the house can push that height up, and a chimney more than a few feet above the roof can need bracing. We work out the height before the route is final. Bracing parts come from the chimney maker's list.

The air space around a masonry fireplace

Framing lumber keeps a 2-inch gap at the face and sides of a masonry fireplace, and a 4-inch gap behind it. That air space has to stay open, except where fireblocking closes it at floors and ceilings. The code allows combustible trim and sheathing edges to meet the side walls and hearth extension only where they sit at least 12 inches from the inside of the firebox lining.

When we frame the wall around a new masonry fireplace, those gaps are measured before the drywall goes up, because they cannot be checked afterward. Where a gap is short, the fix is framing. Insulation or caulk will not do it.

Free Inspection

Checked in Hilliard before a fireplace goes in

Clearance to combustibles marked on each side of the unit
Chimney route with each offset and elbow counted
Footing size for a masonry fireplace, per R1001.2
Roofer, electrician or other trades named with their part of the job

FAQ

Before any wall is opened

Can you install a wood-burning fireplace in a house in Hilliard that has none?

Yes, where the house allows it. It depends on a route for the chimney from the hearth to the roof that meets the listing or the code, and on room for the hearth extension. The first visit walks that route and tells you whether it works.

Is a factory-built fireplace as safe as a masonry one?

Installed and kept to its listing, a factory-built fireplace is tested as a complete system with its chimney. Its safety depends on that listing being followed, which is why substitute parts are not used.

Our Services