Rock and stone chimney repair in Fleming Island
Deep stone joints get filled in layers, not smeared over. That is how Fleming Island stone repairs are done right.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local stone masons who match mortar and joints in Fleming Island
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
A cured sample is approved before repointing starts on your Fleming Island chimney.
- Free inspection and estimateWhether your Fleming Island chimney is full stone or veneer is settled on a free visit, before any price.
- Upfront pricing, no hidden feesStones, joints and veneer area are priced in writing one line at a time.
- Family owned and operatedOur family-owned masons approve the mortar sample with you before the first joint is filled.
Joints washed out between the stones
Stone joints are wide and irregular, so when mortar erodes, the gaps can run deep. Water then gets into the heart of the chimney, and the stones start to depend on each other instead of on mortar. A thin skim of new mortar over a deep gap falls out in a season. Rain driving into deep, open joints also reaches the flue side of the masonry.
We rake stone joints in Fleming Island back to sound mortar, which can mean several inches, and fill them in layers until they are full. The estimate prices the joints by the run, and our masons match the mortar to what is there.
Fleming Island is an inland community. Fleming Island lies on the St. Johns River.
From one loose stone to a veneer reinstall
- Loose stones reset on fresh mortar beds
- Deep stone joints raked and repointed in layers
- Bulging anchored veneer secured or rebuilt
- Dry-stack veneer refitted tight
How our masons repair a stone chimney in Fleming Island
-
Describe what moved
Tell us what has shifted or fallen, and the free visit comes equipped for it.
-
Build and backing confirmed
Corners, joints and the base show the build, and a loose piece shows what is behind the veneer.
-
Reset, repoint or reinstall
Stones go back on fresh beds, joints fill in layers, and veneer returns to a repaired backing.
-
Matched and cured
An approved mortar sample and the old joint profile guide the finish, and the cure time is written down.
Movement cracks in Fleming Island
Cracks that step through several joints are unrelated to the coast. In Fleming Island, they point to movement at the footing or the top of the chimney.
Crack width and lean are measured before any repointing is quoted.
10% off any service booked within 72 hours of inspection
Loose stones or open joints? The stone work you book in the next three days comes 10% off.
Telling full stone from veneer
Corners give the build away. Full stone turns the corner with whole stones that show their depth on both faces, while veneer corners use L-shaped pieces or cut returns. Joint depth helps too: full stone joints run deep into the wall, and adhered veneer has only a thin setting bed behind each piece.
At the base, adhered veneer should end at a screed or flashing with a small gap above the ground or paving. A loose piece, where there is one, shows the backing directly. We write down what told us the answer, not only the answer. Sound helps as well: tapping adhered veneer over a gap in its bond gives a hollow note that full stone does not.
Reading white bloom on stone
Efflorescence forms when water moving through masonry carries dissolved salts to the surface and leaves them behind as it dries. Preservation Brief 2 notes that when salts crystallize just below the surface instead, the pressure can flake the face of the unit.
The bloom marks where water is travelling, so we map it before cleaning. Deposits come off with dry brushing or gentle washing tested on the stone first, and the water source goes on the estimate ahead of the cleaning. Bloom that comes back after cleaning is a useful signal, because it shows the water path is still open.
Water repellents on a stone chimney
A breathable water repellent can help stone shed rain, and the data sheets for such products list natural stone among their substrates. They go on only after repointing and resetting are finished and cured, never as a substitute for them.
Film-forming sealers that leave a gloss are a different thing: they trap moisture behind the face. We recommend a repellent only where the stone and its exposure call for one, and the product and its reapplication interval go on the ticket. A repellent also changes nothing about open joints or loose stones, so it is priced only after those are fixed.
What we check on a stone chimney in Fleming Island
- Veneer backing opened and checked where bulging or loose
- Cleaning method tested on the stone and named on the ticket
- Access equipment and roof protection listed on the estimate
- Structural movement flagged ahead of any stone work
Before a stone is taken out
Can you match my stone?
We look for the closest current match and also consider moving stones from a hidden face to the repair. You see the options and approve a sample before any stone is removed.
Do you charge to look at a stone chimney in Fleming Island?
No. The stone, the joints, the top and the base are all checked, and the written estimate costs you nothing.
More services in Fleming Island
-
-
-
-
-
-
Learn more about stone chimney repairAll services in Fleming Island
A free stone chimney check in Fleming Island
Our family-owned masons repair stone chimneys in Fleming Island and guarantee the work to your 100% satisfaction.
Free Inspection