Call(904) 920-5495

Family-run chimney flue repair in Fleming Island

Family-owned flue specialists map your Fleming Island flue from top to bottom for free, then save the liner where it can be saved.

  • Fully licensed and insured
  • Locally owned
  • Family owned and operated
  • Same-day service

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Family-owned flue experts serving Fleming Island

  • Locally owned in Jacksonville
  • Family owned and operated
  • 100% satisfaction guaranteed
  • Free inspection and estimate
  • Same-day service available
  • 10% off any service

Replacement tiles are set in the refractory mortar the code names.

  • Free inspection and estimateThe flue at your Fleming Island home is swept, examined from both ends and mapped at no charge.
  • 100% satisfaction guaranteedIf the repaired flue is not sound and correctly sized when we finish, we make it right.
  • Family owned and operatedA family business maps the flue and does the repair, so the plan and the work stay in one set of hands.

Cracks that run up the tiles

Long cracks that run up the length of a tile, sometimes on two sides, often come from heat. A very hot fire in a cold flue heats the inner face faster than the outer one, and the tile splits.

A single hairline crack in a sound flue is a repair candidate. Several tiles split the same way, or pieces that have moved, lean the choice toward a new liner. We show you which pattern your flue has before pricing. Split flue tiles in your Fleming Island chimney? Phone (904) 920-5495; our specialists inspect for free.

Fleming Island is on the St. Johns River. The county for Fleming Island is Clay County.

Flue repairs we handle in Fleming Island

  • Flue size measured before any coat goes in
  • Gaps at the smoke chamber closed
  • Relining quoted plainly when repair will not hold
  • Every defect written down by height

Sweep, map, repair, check

  1. Swept and examined

    The flue is cleaned, then looked over from the roof and the firebox with a light and mirrors.

  2. Mapped and measured

    Each defect is placed by height and wall, and the flue size is checked against what it serves.

  3. Repaired by the chosen method

    Top tiles swapped from the roof, damaged sections coated with a listed system, or a relining price when repair will not hold.

  4. Checked and cured

    The finished flue is examined from both ends and left to cure before the first fire.

Heat and the flue in Fleming Island

The biggest strain on a clay flue is a sudden jump in heat. A very hot fire, or a fire in the flue itself, can split tiles along their length.

In Fleming Island we look for those vertical splits first when a flue has seen a hot fire.

10% off any service booked within 72 hours of inspection

From one cracked tile to a full relining, flue work in Fleming Island is discounted.

Flues that serve an appliance

For a flue connected to an appliance, the code sets a simpler floor: the flue is not to be smaller than the connector from the appliance (R1003.14). A flue shrunk by a repair below that size can spill gases at the appliance.

The code also points gas appliance flue linings to its fuel gas chapter, and the appliance's own instructions may set further limits. So before repairing a flue that serves a furnace or water heater, we read the appliance's rating plate and connector size. The repair method is chosen to keep the flue at or above what that appliance needs.

How we examine a flue without opening it

Nearly all of a flue is out of reach, so it is examined from its ends. From the roof, we look down with a strong light. From the firebox or cleanout, we look up with a light and mirrors. The tiles are counted from the top, so every defect can be placed by height.

Where a stretch of flue cannot be seen from either end, we say so in writing. We do not guess at a section we could not see, and the estimate notes whether more access is needed before that part can be judged. Knowing what was and was not seen is part of an honest flue report.

Flue damage after a chimney fire

A chimney fire heats the flue far beyond its normal range. The damage it leaves can include split tiles, open joints, a warped damper and heat reaching framing near the chimney. NFPA 211 asks for a deeper inspection whenever an event has probably harmed the chimney, and a fire in the flue is exactly that.

After the fire department has made the house safe, the fireplace stays out of use until that inspection is done. We examine every tile and joint, look at the clearances around the chimney where they can be reached, and write down whether the flue can be repaired or has to be relined.

Flue findings written down before pricing

  1. Refractory mortar to ASTM C199 named for any tile reset
  2. Inlet thimble and cleanout door condition on appliance flues
  3. Relining priced when repair cannot give a sound, sized flue
  4. Waiting time before a fire, per the mortar or coat maker

Flue repair questions from Fleming Island

Do you repair chimney flues in Fleming Island?

Yes. We repair clay flues across Clay County, Fleming Island included, from single top tiles to full-height resurfacing. If a sweep left a note, have it ready when you call.

How do you see inside a flue?

From both ends, with a strong light and mirrors, after the flue is swept. Anything we could not see is written down as not seen, so nothing is guessed.

Repair cracked flue tiles in Fleming Island

Sweep found a crack in Fleming Island? Read us the note at (904) 920-5495, and we plan the visit around it.

Free Inspection

Call the chimney and fireplace experts

(904) 920-5495

Free inspection and written estimate

Call (904) 920-5495