Hearth repair in Fleming Island, from the base up

Stone slab broken in two? Our Fleming Island hearth pros tell you whether it bonds or needs replacing, free.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local hearth repair pros for Fleming Island homes

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Old stone is glued when a clean break allows it and replaced when it does not.

Free inspection and estimateYour hearth in Fleming Island is sounded, leveled and measured on a free visit before any price is written.
100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.

Call (904) 920-5495 Free Inspection

A fireplace coming back into use

A fireplace that sat unused for years can have a hearth that looks fine and still needs work: tile that let go quietly, a cleanout door that no longer closes, or an extension that was built short. None of it shows until the fire is lit and embers start to fly.

Before the first fire in Fleming Island, we check the hearth along with the firebox and damper, and the estimate gives the hearth findings their own section. The visit is free, and a local family business stands behind the work.

At the 2020 Census, Fleming Island was home to 29,142 people. Fleming Island is inland.

From loose tile to a new slab

Crumbling grout raked out and renewed
Wood flooring cut back from the ember zone
Raised hearth caps reset on a sound base
Your hearth in Fleming Island measured and sketched before work

Call (904) 920-5495 Free Inspection

From the first tap to the first fire in Fleming Island

Describe the hearth on the call
Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.
Sounding and measuring
Each tile is tapped, the slab's level is read and the extension is measured against the opening.
Support first, surface second
A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.
Cured before heat, then handed back
The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.

Inland hearths and water from above in Fleming Island

Being inland does not keep rain out of an open flue. In Fleming Island, a missing cap or a failed seal at the top still lets water run down to the inner hearth.

Water marks at the back of a hearth in Fleming Island send us up the flue before any tile is reset.

10% off any service booked within 72 hours of inspection

A hearth in Fleming Island measured short of code can be extended, and that job is discounted too.

Call (904) 920-5495 Free Inspection

The measurements taken above the hearth

While we are at the hearth, the woodwork above it gets checked too. No combustible trim is allowed closer than 6 inches to the opening. Between 6 and 12 inches, the allowed projection grows by 1/8 inch for every inch of distance, so trim 8 inches out may stand 1 inch proud.

Trim that breaks those limits is not a hearth repair, but it is a fire risk sitting right over one, so we note it. The estimate lists it as a separate item, with the person who handles the carpentry named, and you decide when to deal with it.

Replacing a hearth pad on a listed unit

On a factory-built fireplace, the extension is part of the listing. The manual gives its size, what it may be made of and sometimes an insulating value. A pad that cracked, or was replaced with the wrong material, can take the installation out of its listing without anyone noticing.

The model comes off the rating label, and the manual governs the repair. Where the maker allows a listed hearth extension product, it carries a UL 1618 listing, and R1004.2 asks that the extension stand out clearly from the surrounding floor. A tile surface that blends into the floor is changed to one that does not.

Cure time before the first fire

Fresh mortar and setting materials hold water, and heat drives it out too fast. A fire lit on a new bed can crack it or weaken the bond before it has reached strength. Each product's data sheet gives its cure time before heat and traffic, and refractory products carry their own heat-up instructions.

The cure time for your hearth goes on the ticket with the date the work finished. If the hearth has to take foot traffic sooner, we protect it with boards. Planning a gathering around the fireplace? Tell us the date when you book so the schedule allows for it.

Tile, slab, support and size, in writing

Seam at the firebox cleaned and refilled with a heat-suited material
Ash dump frame reset in refractory mortar and lid fit checked
Cure time before the first fire, written with the finish date
Room and floors covered, with dust kept to the work area

Hearth repair questions from Fleming Island

Is a same-day hearth visit possible in Fleming Island?

Same-day visits happen when a slot is open that day. Describe the hearth on the call and we give you the earliest time we have.

When can I light a fire on the repaired hearth?

That depends on the setting materials, and each product's data sheet gives a cure time before heat. We write that time on your ticket along with the date the work was finished.