Local hearth tile and slab repair in Fernandina Beach

Stone slab broken in two? Our Fernandina Beach hearth pros tell you whether it bonds or needs replacing, free.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Hearth experts who measure before they tile

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Old stone is glued when a clean break allows it and replaced when it does not.

Free inspection and estimateYour hearth in Fernandina Beach is sounded, leveled and measured on a free visit before any price is written.
100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.

Call (904) 920-5495 Free Inspection

Measuring an extension that looks too small

The size of a hearth extension follows the size of the opening it serves. Multiply the opening's width by its height in inches and compare the result with 864 square inches, which is 6 square feet. Below that line the code wants 16 inches in front and 8 on each side. At or above it, 20 and 12.

An older hearth can fall short of those numbers. When we repair a hearth in Fernandina Beach, we measure it against R1001.10 and tell you whether bringing it to size belongs in the same job. Call (904) 920-5495 for a free inspection from local pros.

Census takers counted 13,052 people in Fernandina Beach in 2020. Fernandina Beach sits on the coastline.

From loose tile to a new slab

Hollow tiles found by sound and reset
Stone slabs rebedded, glued or replaced
Factory-built hearth pads checked against the listing
Heat-cracked tile near the opening rebedded

Call (904) 920-5495 Free Inspection

From the first tap to the first fire in Fernandina Beach

Describe the hearth on the call
Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.
Sounding and measuring
Each tile is tapped, the slab's level is read and the extension is measured against the opening.
Support first, surface second
A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.
Cured before heat, then handed back
The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.

Coastal air and the metal around a hearth in Fernandina Beach

Fernandina Beach is one of the coastal places we serve, and chlorides in sea air speed up rust on steel. The hearth itself is masonry, but the ash dump frame, the cleanout door and the screen frame around it are iron or steel.

On hearth jobs in Fernandina Beach, we check that hardware closely and pick replacement parts that hold up to corrosion. Rust streaks on the hearth get traced to the part that made them.

10% off any service booked within 72 hours of inspection

Tile, stone or slab, hearth repair in Fernandina Beach comes 10% off.

Call (904) 920-5495 Free Inspection

Working out the 6 square foot line

R1001.10 switches from the smaller extension to the larger one at an opening of 6 square feet. The opening is its width times its height in inches, and 6 square feet is 864 square inches. A 36 by 24 inch opening lands exactly on the line. A 32 by 26 inch opening comes to 832 and falls just under it.

At or over the line, the extension runs 20 inches in front and 12 inches past each side. Under it, 16 and 8. The measurements and the arithmetic go on the ticket, so anyone can check the size we built to.

What holds the extension up

An extension has to rest on noncombustible support. Depending on how the house was built, that can be the fireplace foundation carried forward, a slab on the ground, or a masonry or concrete support reaching out over a framed floor. Each fails in its own way: a slab on grade can settle, and support over framing depends on the framing staying put.

Before we price a rebuild, we find out which support your hearth has, from below where a crawlspace allows or by opening the edge. The support type decides whether the new extension can sit on what is there or needs a base of its own.

Sounding tile for lost bond

A hollow tile has lost contact with its bed, fully or in part. Tapping with a hard, light tool across the surface finds it by sound before it cracks. We mark each hollow unit and note whether the hollow spots cluster, since a cluster along one line can follow a crack in the slab below.

Scattered hollow tiles on a sound slab are reset one by one. A large hollow area, or hollow tile over a moving slab, is a bed or slab problem, and patching single tiles there buys little time. The count of hollow tiles is written on the estimate so the price follows the real extent of the damage.

Tile, slab, support and size, in writing

Every tile sounded, with hollow units counted on a sketch
Cracked tile or stone replaced, with the matching source named
Grout raked and renewed, product and color written down
Hearth pad on a factory-built unit checked against its manual

Hearth repair questions from Fernandina Beach

Do you replace only the cracked tiles or the whole hearth?

Only the cracked ones when the slab under them is sound and the tile can be matched. If the slab has moved or the extension is too small, we explain why a bigger repair makes sense and price both.

Do you work on hearths for factory-built fireplaces?

Yes. We follow the unit's listing and manual for the pad size and material, and use listed products where the maker calls for them. Have the model number ready when you call if you can find it.