Local stone chimney repair in Crawford
Hard cement patches or caulked joints on your Crawford chimney come out before any new mortar goes in.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Stone chimney specialists for Crawford homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Water behind the stone is traced before the stone is put back.
- Free inspection and estimateWhether your Crawford chimney is full stone or veneer is settled on a free visit, before any price.
- Upfront pricing, no hidden feesStones, joints and veneer area are priced in writing one line at a time.
- Family owned and operatedOur family-owned masons approve the mortar sample with you before the first joint is filled.
Gray cement smeared over old joints
A quick patch on a stone chimney can mean gray cement spread across the joints and onto the stone faces. Hard cement over soft stone can force movement and moisture through the stone instead of the joint, and it hides whether the mortar behind it has failed. It can also crack away from the stone, letting water in behind it.
We cut out old cement patches on chimneys in Crawford with care for the stone edges, then repoint with a mortar matched to the stone's hardness. The estimate shows how much has to come out before new mortar goes in.
Crawford is in Nassau County. Crawford lies inland.
What our stone masons fix in Crawford
- Cracked stones replaced with matched pieces
- Water barrier and lath repaired behind veneer
- Bulging anchored veneer secured or rebuilt
- Veneer cut back from the roof surface
The order of a stone chimney repair
-
Describe what moved
Tell us what has shifted or fallen, and the free visit comes equipped for it.
-
Build and backing confirmed
Corners, joints and the base show the build, and a loose piece shows what is behind the veneer.
-
Reset, repoint or reinstall
Stones go back on fresh beds, joints fill in layers, and veneer returns to a repaired backing.
-
Matched and cured
An approved mortar sample and the old joint profile guide the finish, and the cure time is written down.
Mortar hardness inland in Crawford
The rule that mortar should be no harder than the stone holds in Crawford as it does everywhere. Hard patches on soft stone crack the edges whatever the distance from the coast.
We match the mix to your stone and write it on the ticket.
10% off any service booked within 72 hours of inspection
Repointing, resetting or a barrier repair behind the face, each is discounted.
Why adhered veneer lets go
Adhered veneer holds on by bond alone. That bond fails when water sits behind the stone, when the lath corrodes, when the backs of the stones were dusty or dry when set, or when the setting mortar was not spread over the whole back of each piece.
The pieces themselves tell the story: a clean back means the bond never formed, mortar stuck to the back means the scratch coat or lath let go, and rust stains point to the metal. We read those clues before choosing between resetting pieces and rebuilding the backing. That diagnosis decides whether the rest of the veneer is at risk or whether the failure is local.
Taking veneer off and putting it back
When a section of veneer has lost its backing, the fix is to take that section off, repair the water barrier and lath, and set the stones back. Pieces are numbered as they come off where the pattern matters, cleaned of old mortar and reset with the setting mortar their maker specifies, buttered over the whole back.
The edges of the repaired area are feathered into the sound veneer so the joints run through. We price the area in square feet and say how many stones we expect to reuse, since breakage during removal is part of the job. New lath and barrier are lapped into the old ones at the edges of the opening, so water keeps draining the right way.
Removing hard cement patches
Portland cement patches spread over stone joints are harder and less permeable than the stone or the original mortar. Moisture that cannot leave through the patch leaves through the stone, and hard patches can crack the stone edges they cover.
Taking them out is slow work, done by hand along the joint so the stone edge survives. We price the removal separately from the repointing, because a chimney with a lot of old patching takes longer before any new mortar goes in. Where a patch has already cracked a stone edge, that stone is reset or replaced along with the joint.
What we check on a stone chimney in Crawford
- Joints raked to sound mortar and filled in layers
- Cracked stones replaced, with the source of each match named
- Water barrier and lath repaired before veneer is reset
- Base drainage exit checked and opened where buried
Before a stone is taken out
Can you match my stone?
We look for the closest current match and also consider moving stones from a hidden face to the repair. You see the options and approve a sample before any stone is removed.
Will the new mortar look different?
It starts darker and dries lighter, which is why we cure test samples and compare them before work begins. The joint style is matched as well as the color.
More services in Crawford
-
-
-
-
-
-
Learn more about stone chimney repairAll services in Crawford
Loose stones or failing veneer in Crawford?
Full stone or veneer, our stone specialists in Crawford explain the repair the build calls for and write down the price.
Free Inspection