Fireplace repair in Crawford by local experts
Refractory mortar, firebrick and maker's parts, used as the code and listings require for Crawford fireplaces. The inspection is free.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local fireplace experts for Crawford homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
A fireplace repair in Crawford starts by settling whether the unit is masonry or factory-built, since the rules differ.
- Locally ownedA locally owned business shows you the failing part of your Crawford fireplace before any price.
- Upfront pricing, no hidden feesSafety repairs come first on the estimate, and items that can wait are priced on their own lines.
- 100% satisfaction guaranteedIf the fireplace still smokes or sticks after the repair we quoted for it, we come back.
Cracks in the hearth, read before they are filled
Hearth cracks carry information. A crack that runs across the slab and widens over time points to the support underneath, while one that follows the grout lines between tiles points to heat and movement at the surface. Filling either with caulk hides the evidence and fixes neither.
For a hearth in Crawford, we tap the tiles to find hollow spots, check the slab edge for movement, and measure the hearth extension against the code or the listing while we are there. The repair then fits the cause, from resetting a few tiles to replacing the slab. We bring the likely parts to the free fireplace check in Crawford; call (904) 920-5495.
Crawford is in Nassau County. The coastline lies beyond Crawford.
Fireplace repairs for Crawford homes
- Cracked firebrick cut out and replaced brick by brick
- Refractory panels ordered by the model on the rating plate
- Smoke problems traced with a test fire
- Rusted lintel over the opening checked for movement
How fireplace repair runs
-
Type and rating plate read
We settle whether the fireplace is masonry or factory-built and read the model where there is one.
-
Joints, damper and hearth checked
Joints are probed, the damper worked through its travel, and the hearth and trim measured.
-
Repair with the right materials
Refractory mortar and firebrick for masonry, the maker's parts for factory-built units.
-
Test fire and cleanup
Where smoke was the problem, a short test fire checks the fix, and the room is cleaned before we go.
Smoke coming into the room in Crawford
Smoke spilling out of the opening has a handful of causes: a damper not fully open, a cold flue, a house short of air or an opening too big for its flue.
A short test fire at your Crawford home shows which one it is, and each has a fix far smaller than a rebuild.
10% off any service booked within 72 hours of inspection
Fireplace repairs in Crawford come 10% off whether the fix is small or large.
Refractory mortar and the bag-mortar mistake
The mortar in a firebox is not the mortar in a brick wall. ASTM C199 covers refractory mortars, and the code calls for the medium-duty grade between firebricks. Ordinary masonry mortar is made to handle weather rather than a fire burning against it hour after hour, and a firebox patched with it breaks down again under the heat. Premixed fireplace patch in a tube has a place for hairline gaps where its maker says so, but a joint that has washed out needs to be raked and refilled. When we open a firebox that has been patched before, the wrong material comes out before the right one goes in.
Pokers, rotary handles and chains
Dampers are worked by one of a few mechanisms: a poker handle that pushes the plate open and hooks at a notch, a rotary handle on the face of the fireplace turning a rod, or a chain running to a damper at the top of the flue. Each fails in its own way. Pokers bend and their notches wear, rotary rods seize where they pass through the masonry, and chains stretch or pull free of their bracket. The repair may be freeing, straightening or replacing the linkage rather than the damper itself, and it is priced apart from the plate so you are not buying a new damper to fix a handle.
A lintel that is pushing the brick
The masonry above a fireplace opening sits on a lintel, which the code requires to be noncombustible, with at least 4 inches of bearing at each end. Where that lintel is a steel angle, rust is its weakness. Steel grows as it rusts, and a rusting angle can lift or crack the brick it carries, which shows as a horizontal crack just above the opening or a course of brick that has bowed. Surface rust that has not moved the brick is cleaned and protected.
An angle that has lost metal or already cracked the face needs the brick above it taken down, a new angle set with full bearing at each end, and the brick relaid. We tell you which, with what we measured.
Tested in Crawford before a fireplace repair is priced
- Damper plate, pivot and handle freed, adjusted or replaced
- Smoke guard sized to lower an opening that is too tall
- Lintel over the opening checked for rust and lifted brick
- Spark screen checked for gaps and replaced with the listed part
Before the firebox is opened up
Will you tell me if the fireplace is unsafe to use?
Yes, in writing. Faults such as an open firebox joint, a panel broken through to the steel or a damper that will not open go at the top of the estimate with a note to leave the fireplace unused until they are fixed.
Is there a charge for the estimate?
No. The written estimate is free, and the price on it is upfront, with no hidden fees added later.
More services in Crawford
-
-
-
-
-
-
Learn more about fireplace repair and serviceAll services in Crawford
Bring your Crawford fireplace back into use
Damper stuck or firebrick cracked in Crawford? The first look costs nothing.
Free Inspection